[PassingBy]

Hmmm ......

What spurs my modification of NUSB :

The History said:

I finally got around to rebuild and reinstall a Windows 98 First Edition system ... I thought I'd give it a shot with the NUSB3.1 .... and ..... as I predicted, it doesn't work .....

Well, I thought that I'd give it a whack, a hack and a patch or two to see how it'll measure up .... and after a couple of days looking for suitable drivers and test runs .... here it is:

(Historical mirror:)
NUSB 3.11 Alpha for Windows 98 First Edition - mirror
NUSB 3.11 Alpha for Windows 98 First Edition - mirror

Folks, those of you who were wondering and asking and looking here and there if it's possible for your W98 FE to support usb drives .... please have a go and see if it works for you .....

The system tested on :
Duron 750 on SiS730 motherboard using usb1.1 openhci drivers running Windows 98 1st edition.

The install sequence was :
1. Windows 98FE + plus all required drivers
2. Windows 98FE SP2.3.0
3. IE6 sp1
4. NUSB 3.11 Alpha for W98FE
5. RP7MM

Tested with:
A bunch of usb flash drives by Apacer, Buffalo, etc etc etc .......
Haven't had a chance to test with usb 2.0 or any other usb devices yet, so your mileage may vary .....

Changes:
- Replaced usbstor.sys with skumss.sys : Seems to be reasonably fast and stable on Win98FE. It was ripped from one
the drivers on the net and I couldn't remember where as there were several more that I played around with. AFAIK,
it seems to be based on the free usb sample driver in MS DDK somewhere ....
- Replaced usbmphlp.pdr with skpdr.pdr : The mini port driver to make the magic work ...
- Usbntmap.sys is now used to trigger the usb event notification to make systray eject icon appears ...
- Added batmeter.dll : This one's taken from stock win98se for systray to properly behave. What can I say ?

And as usual, no warranty bla bla bla no bla bla bla ....

I just wanted to see if it will work as I thought it should .....

@Maximum-Decim
My apologies if I didn't get to you first on this ... If this one's a dud, I'll take all the flak ... that's fine ... If it works good for others, then the ....

Credits goes to Maximum-Decim for the original NUSB 3.1 for Win98 SE ...

Rgds

Native USB 3.20 for Windows 98 First Edition English Release & mirrors :

NUSB 3.20 English for Windows 98 First Edition - mirror

NUSB 3.12 Beta for Windows 98 First Edition - mirror & info


Changes/updates for 3.12 beta:
1. Usbstor is now working on windows 98 FE. Previous plans of using Umss have been dropped.
2. Usb 2.0 support is now working on windows 98 FE. Test runs on via usb2.0 indicates everything is functional.
3. Updated explorer ver 4.72.3612.1700
4. Corrections to ATI usb2.0 inf section.
5. Patched disktsd.vxd 4.90.3000 update.
6. USB FDD support re-enabled. Test runs on mitsumi usb fdd confirmed it to be fully functional.

Updates for 3.20 (stable):
1. Powerbutton not working on ACPI systems. Fixed by replacing acpi driver.
2. Minor changes to usb controller and storage classes.

This post has been edited by PassingBy: 16 March 2008 - 05:08 PM

[jaclaz]

PassingBy, on Oct 15 2007, 06:09 AM, said:

Changes:
- Replaced usbstor.sys with skumss.sys : Seems to be reasonably fast and stable on Win98FE. It was ripped from one
the drivers on the net and I couldn't remember where as there were several more that I played around with. AFAIK,
it seems to be based on the free usb sample driver in MS DDK somewhere ....

- Replaced usbmphlp.pdr with skpdr.pdr : The mini port driver to make the magic work ...

It seems like that driver is from PQI:
http://www.msfn.org/board/usb_drivers_98_t...6.html&st=7

GOOD work!

jaclaz

[LukeSkillz]

This is probably the most used update I've ever had on my 9x machine! I have multiple flash drives, only one of which previously worked with Windows 98. Thanks to this, I now can use all of them, along with MP3 players and digital cameras too! Keep up the good work

[dencorso]

After Dr. Hoiby's Windows Explorer 256 color TrayIcons Patch and Wijono's hot removal of USB device SYSTRAY.EXE (4.10.0.2224) Patch, both already included in NUSB, I now offer you:

dencorso's USB FDD DiskTSD.VxD 4.90.0.3000 Patch, that allows NUSB to work with FDDs without a BSOD!

Do you remember this post by Petr? [Petr, where are you??? ]

Petr, on Nov 14 2006, 06:34 PM, said:

I played again with Mitsumi USB FDD and I found the solution of the blue screen problem - to use DISKTSD.VXD 4.90.3000 and the old DISKTSD.VXD (4.10.2223) to rename to DISKTSD1.VXD. But not 100%.

Just replacing 4.10.2223 by 4.90.3000 does not work, the system won't boot and in the bootlog appears:

[00151BDA] Dynamic load device  C:\WINDOWS\system\IOSUBSYS\disktsd.vxd
[00151BDA] Dynamic load failed  C:\WINDOWS\system\IOSUBSYS\disktsd.vxd : [00151BDA] Not a valid device  - possibly corrupt

After installing nusb, inserting the USB Floppy causes blues screen with error in DISKTSD.VXD.

After renaming old and copying new disktsd.vxd I was able to use the USB floppy with no problem.

BTW, in Windows Me everything works fine.
Then I tried to use 98SE2ME, at first the option installing just the USB drivers, second time option 2 - install everything.
In both cases plugging the USB floppy into the PC did not cause the blue screen, but in the device manager appeared yellow exclamation mark and the FDD did not work. The above described procedure with renaming and copying DISKTSD.VXD did not help.
I have shortly looked into the 4.90.3000 code and there are only very few differences in comparison to 4.10.2223 so it is possible that the 4.10.2223 version could be modified to work correctly - but I don't know how. [...]
Petr

Well, it set me thinking... My first though was: how so? Win 98SE will not allow one to rename and substitue a file in use! But I tested, and in fact Win 98SE does allow it, at least in this case: it works as Petr described.
The downside of Petr's solution is that if one forgets to exchange back the DiskTSD.VxDs before shutdown, or has a system crash, the system will refuse to boot due to the failed dynamic loading of v. 4.90.0.3000! And it'll be necessary to boot in DOS to do the renaming, before the system is able to boot up normally again. So, a way to have v. 4.90.0.3000 undergo successfully the dynamic load was a must that simply had to be found... ...and here is it:

1) Fetch DiskTSD.VxD v. 4.90.0.3000 from inside your Win ME installation CD (it is in WIN_20.CAB), and extract it to a new folder named, say, PATCH.
2) Rename DiskTSD.VxD to DiskTSD.PAT and extract yet another copy of DiskTSD.VxD from WIN_20.CAB, so that now you have two identical files in the PATCH folder, differing only in the name extension.
3) Open DiskTSD.PAT with your favourite HexEditor and search for the hexadecimal sequence 00005A04, which you should find only two times, in two different places (at offsets 140 and 866).
4) Change, in both places hexadecimal 5A for 0A, and save the file.
5) Now, in a DOS box, set to the PATCH directory, run <fc DiskTSD.VxD DiskTSD.PAT /b> You should see this:
00000142: 5A 0A
00000868: 5A 0A
6) If you saw that, copy DiskTSD.PAT to %windir%\SYSTEM\IOSUBSYS, rename the DiskTSD.VxD found there to DiskTSD.ORI and then rename DiskTSD.PAT to DiskTSD.VxD. As Petr found out, you can do that with windows running.
7) If you are using NUSB24 or earlier, that's all. But if you are using NUSB31, now you must got to %windir%\INF, save a copy of USBSTOR.INF as USBSTOR.ORI, and then open USBSTOR.INF in, say, WordPad and uncomment (delete the leading semicolon) all lines referring USB FDDs (there are 8 such entries: one each for Mitsumi, HP, NEC, SMSC, Sony and TEAC, and two for YEData), and save USBSTOR.INF.
8) It's not mandatory, but at this point a recommend you to reboot your system.
It's done! Enjoy using USB Floppy Drives in Win 98SE!

Of course, the standard disclaimer applies: It works great for me, but YMMV and I can guarantee nothing whatsoever about this patch, and about the use you make of it. By deciding to use it you fully accept that anything you do is of YOUR SOLE RESPONSIBILITY... Also, to use Win ME files you must have a Win ME licence. Moreover, modding files voids the EULA, of course. You have been warned. Hence, if after performing this mod your pc morphs into a purple mushroom and explodes, causing a 10-day worldwide blackout in the process, you know you can't blame me for it!

This post has been edited by dencorso: 27 October 2007 - 12:59 AM

[PassingBy]

Hmmm .....

@dencorso:

Essentially, you're changing the version checks to 4.10 to allow it to load .... something like DOS did back then ...

That has given me an idea ..... perhaps these device loaders can be used to patch older win95 too with this method. I'll try these on win98 FE to verify if these can work ... well, as soon as I can find some time ...

If it works then we need to figure a way to tag the original version numbers somewhere else ...

Rgds

[dencorso]

PassingBy, on Oct 27 2007, 08:33 AM, said:

Hmmm .....
@dencorso:
Essentially, you're changing the version checks to 4.10 to allow it to load .... something like DOS did back then ...

Precisely so! At DDK_Version and at SDK_Version. But, in DOS, a guest program asked the OS for its version, while, in Win, AFAIK, the guest program informs the OS which Win version it was meant for. But, at the end of the day, it has the same result.

Quote

That has given me an idea ..... perhaps these device loaders can be used to patch older win95 too with this method. I'll try these on win98 FE to verify if these can work ... well, as soon as I can find some time ...

Go for it! I do believe it may work im many cases. As it was back then, programmers still today have the habit of implementing unnecessarily over-restrictive version checking.

Quote

If it works then we need to figure a way to tag the original version numbers somewhere else ...
Rgds

No, we don't. The version numbers are unchanged in the VS_FIXEDFILEINFO Structure. That should be enough, don't you agree? It's us that need to know which file is which. Windows must not, or it won't work!
Best wishes.

[MDGx]

This is an iexpress installer for dencorso's files:

* Unofficial Windows 98 SE NUSB 3.1 English DISKTSD.VXD 4.90.3001 + USBSTOR.INF Update:
http://www.msfn.org/...ic=43605&st=352
NUSB31UP [116 KB, English]:
http://www.mdgx.com/spx/NUSB31UP.EXE
NUSB31UP requires NUSB 3.1 English (see below) already installed!
- NUSB 3.1 [742 KB, English]:
http://www.mdgx.com/spx/NUSB.EXE
NUSB:
http://www.msfn.org/...showtopic=43605
Also linked here:
http://www.mdgx.com/web.htm#NUS

Details [pops up whenever you install NUSB31UP]:

Quote

Unofficial Windows 98 SE NUSB 3.1 DISKTSD.VXD 4.90.3001 + USBSTOR.INF Update
per dencorso's guidelines

EXTREMELY IMPORTANT:
You MUST REBOOT at END of INSTALL to complete properly!
Do NOT install MORE THAN ONCE WITHOUT REBOOTING AFTER FIRST INSTALL!

REQUIRED:
Windows 98 SE Native USB Drivers (NUSB) 3.1 English MUST be already installed for these files to work properly:
http://www.msfn.org/...showtopic=43605
also here:
http://www.mdgx.com/web.htm#NUS

DESCRIPTION:
This modded Windows ME DISKTSD.VXD 4.90.3001 has version check changed to 4.10 [Windows 98/98 SP1/98 SE] to allow USB floppy drives listed in this modded USBSTOR.INF to work properly.
This modded USBSTOR.INF has USB floppy drives manufacturer IDs added back in to allow this modded DISKTSD.VXD 4.90.3001 to detect them properly.

Everything here applies only to English editions.

NOTE:
Provided 'as is', without any warranties, expressed or implied.
Use at your own risk!

INSTALL:
This Update installs these 2 files [%windir% = usually C:\WINDOWS] into:
DISKTSD.VXD 4.90.3001 = %windir%\SYSTEM\IOSUBSYS
USBSTOR.INF = %windir%\INF

UNINSTALL:
How to uninstall this Update and restore original files (if any):
Start button -> Settings -> Control Panel -> Add/Remove Programs -> select "Unofficial NUSB 3.1 DISKTSD.VXD + USBSTOR.INF Update" -> click Add/Remove button -> reboot.

MORE INFO:
MSFN forum: Modded Windows ME DISKTSD.VXD + USBSTOR.INF work with Windows 98 SE NUSB 3.1:
http://www.msfn.org/...ic=43605&st=352

Enjoy.

[dencorso]

MDGx, on Oct 31 2007, 06:43 PM, said:

This is an iexpress installer for dencorso's files:

* Unofficial Windows 98 SE NUSB 3.1 English DISKTSD.VXD 4.90.3001 + USBSTOR.INF Update:
http://www.msfn.org/...ic=43605&st=352
NUSB31UP [116 KB, English]:
http://www.mdgx.com/spx/NUSB31UP.EXE
NUSB31UP requires NUSB 3.1 English (see below) already installed! [...]

Thanks a whole lot, MDGx! You really do rock!

Text added 1st November 2007, 06:09 PM
Well, in view of the next post, let me say:
Way to go, maximus-decim! You too rock, you know!

This post has been edited by dencorso: 01 November 2007 - 03:12 PM

[maximus-decim]

Maximus Decim Native USB ver.3.2
------------------------------------------------------------------------
*Native (without installation of additional drivers for each type) support USB flash drives, digital photo
and videocameras and other similar devices.
*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.
1.Remove ALL drivers USB flash drives.
2.Remove ALL drivers USB 2.0 controllers.
3.Remove ALL unknown devices.
4.Install NUSB 3.2 and reboot.
5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.
Remember! You install it at own risk!
-----------------------------------------------------------------------------------------------------------------------
English: http://rapidshare.co...usb32e.exe.html
Russian: http://rapidshare.co...usb32r.exe.html

What's new?
*Add USB FDD + DISKTSD.VXD 4.90.3001
*Fix USB2.IFX for ATI chipsets
*explorer.exe ver 4.72.3612.1700

[PassingBy]

Hmmm .....

I've made preliminary test runs of the version patched DISKTSD.VXD on windows 98 FE (thanks for the tip dencorso!) and so far has found no signs of trouble ... Haven't had the chance to tryout the usb fdd support yet ... will give an update when that's done ...

Native Usb 2.0 does not seem to work on windows 98 FE ... It seems that MS usbhub20.sys is not loaded by ntkern ... Can anyone help determine if this is also due to version checks or hardware related problem ? I'm much rusty on this thing ... any help or hints is appreciated ...

However, replacing with vendor usb 2.0 hub driver then the whole thing works. Tests was done on a VIA 8235 based usb2.0 ... So, for VIA based usb 2.0, only the usbhub20.sys file needs replacing to make it work ... I'm also experimenting with other drivers to see if there's any other possible solution ... I've also made the usb power/bandwidth property tab works but I think most users won't be too concerned (and probably will be left out later) ... I've made minor changes to the driver set to support VIA usb 2.0 ... This makes it sorta not so native ms usb driver ...

For the time being, I'm not updating the win98 FE usb driver set until I can figure out if the the above issues can be resolved.

Update:
I was looking at VIA usbhub20.sys file and wondering if it could be a generic hub stack (perhaps it is a reference to MS usb hub driver somewhere) ..... I'm curious to know why it can interact smoothly with the other "parallel" usbport and usbehci driver from MS ... Usually this kind of thing will go "huh?" in windows ...

Final edit:
Yep, the VIA usbhub20.sys seems to be based on MS DDK library ... if anyone willing to "experiment" usb2.0 on win98 FE with this please let me know ... I'll make a patch for you to tryout ...


Rgds

This post has been edited by PassingBy: 01 November 2007 - 07:49 AM

[dencorso]

PassingBy, on Nov 1 2007, 09:38 AM, said:

[...]Native Usb 2.0 does not seem to work on windows 98 FE ... It seems that MS usbhub20.sys is not loaded by ntkern ... Can anyone help determine if this is also due to version checks or hardware related problem ? [...]
Yep, the VIA usbhub20.sys seems to be based on MS DDK library ... if anyone willing to "experiment" usb2.0 on win98 FE with this please let me know ... I'll make a patch for you to tryout ...
Rgds

Well, PassingBy, MS usbhub20.sys is a WDM driver (hence a PE executable), so it's a totally different animal than a VxD... By looking into it with eXeScope, you'll find out it asks for win 4.0 (= win 95) everywhere, so I think version checks are not the problem. But if VIA usbhub20.sys works, you should compare both usbhub20.sys's with eXeScope, MiTeC EXE Explorer, and PEDUMP.EXE by Matt Pietrek, to see what you find. A quick look with dependency walker shows them to have the same dependencies, which is good for a start. Good luck! Do keep us posted on your progresses. And... Keep on the great work!

[Philco]

maximus-decim, on Nov 1 2007, 01:19 AM, said:

Maximus Decim Native USB ver.3.2
------------------------------------------------------------------------
*Native (without installation of additional drivers for each type) support USB flash drives, digital photo
and videocameras and other similar devices.
*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.
1.Remove ALL drivers USB flash drives.
2.Remove ALL drivers USB 2.0 controllers.
3.Remove ALL unknown devices.
4.Install NUSB 3.2 and reboot.
5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.
Remember! You install it at own risk!
-----------------------------------------------------------------------------------------------------------------------
English: http://rapidshare.co...usb32e.exe.html
Russian: http://rapidshare.co...usb32r.exe.html

What's new?
*Add USB FDD + DISKTSD.VXD 4.90.3001
*Fix USB2.IFX for ATI chipsets
*explorer.exe ver 4.72.3612.1700

Czech build Maxim Decimus NUSB v. 3.2 (only for czech version Windows 98 SE)
http://www.winpack.o...d.php?soubor=26

thx Maxim Decimus!

[PassingBy]

Hmmm .....

Thank you dencorso for your hints but I figured that one out earlier while doing some reading up and digging around for clues ...

I am pleased to report that the native ms usbhub20.sys driver is now working with windows 98 FE .....

I was snooping into via usb2.0 hub driver headers and after comparing with ms usb2.0 hub driver, I concluded that they're were both from the same base reference material (plus minus bug fixes etc etc). My guess was confirmed later on when I verified that all function calls are the same except WMI calls ... so that's where the difference is and its enough to break it ...

I'm planning to update nusb for windows 98 FE soon ..... the planned changes will be :

1. Using UMSS.SYS compiled from MS sample reference driver. I concluded that usbstor.sys will not work on W98FE due to different function calls to ntoskrnl (available only from W98SE upwards). The working replacement was found at http://sweetlow.at.t...wnload/umss.zip

2. Minor changes to get MS usbhub20.sys loaded correctly on win98 FE ...

3. Updated explorer.exe to match nusb3.2

4. Updated DISKTSD.VXD (4.90.3000) for possible usb fdd support ?

5. Generic W98FE driver support for usb fdd. There's many drivers flying around but I believe there's a generic version that will work on nec and mitsumi drives. This is still unverified as I'm waiting to get my hands on a usb fdd to tryout.

6. Please comment if I should include the ATI usb2 fix (to match nusb3.2) ...


I'll be putting the update on hold until I can verify usb fdd can properly work ...


Rgds

[glocK_94]

maximus-decim, on Nov 1 2007, 08:19 AM, said:

Maximus Decim Native USB ver.3.2
------------------------------------------------------------------------
*Native (without installation of additional drivers for each type) support USB flash drives, digital photo
and videocameras and other similar devices.
*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.
1.Remove ALL drivers USB flash drives.
2.Remove ALL drivers USB 2.0 controllers.
3.Remove ALL unknown devices.
4.Install NUSB 3.2 and reboot.
5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.
Remember! You install it at own risk!
-----------------------------------------------------------------------------------------------------------------------
English: http://rapidshare.co...usb32e.exe.html
Russian: http://rapidshare.co...usb32r.exe.html

What's new?
*Add USB FDD + DISKTSD.VXD 4.90.3001
*Fix USB2.IFX for ATI chipsets
*explorer.exe ver 4.72.3612.1700

French Maxim Decimus NUSB 3.2 :
avaible as usual at : win9x4ever.online.fr

Maximus, you rock man! And lots of thanks to Dencorso too!
(by the way, nice idea the little flag Philco. I might just do the same some day...)

[dencorso]

PassingBy, on Nov 1 2007, 07:23 PM, said:

[...]I am pleased to report that the native ms usbhub20.sys driver is now working with windows 98 FE ..... [...]
4. Updated DISKTSD.VXD (4.90.3000) for possible usb fdd support ?

5. Generic W98FE driver support for usb fdd. There's many drivers flying around but I believe there's a generic version that will work on nec and mitsumi drives. This is still unverified as I'm waiting to get my hands on a usb fdd to tryout.

6. Please comment if I should include the ATI usb2 fix (to match nusb3.2) ... [...]

Way to go, PassingBy!

regarding your questions:
4 and 5. The patched DISKTSD.VXD (4.90.3000) ought to work OK in Win 98FE. I think no other driver will be required, besides the NUSB files and DISKTSD.VXD. If not, consider, as the first step, adding CDVSD.VXD 4.90.0.3003, previously patched by the same method to change version. I know it works OK in Win 98SE. I'm using both right now.

6. I think so, yes.

Keep on the great work!

[swgreed]

maximus-decim, on Apr 11 2005, 09:09 AM, said:

Maximus Decim Native USB ver.3.2
------------------------------------------------------------------------
*Native (without installation of additional drivers for each type) support USB flash drives, digital photo
and videocameras and other similar devices.
*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.
1.Remove ALL drivers USB flash drives.
2.Remove ALL drivers USB 2.0 controllers.
3.Remove ALL unknown devices.
4.Install NUSB 3.2 and reboot.
5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.
Remember! You install it at own risk!

German Maximus Decim NUSB 3.2:
http://www.nandlstad...m/downloads.htm

[PassingBy]

Hmmm .....

NUSB 3.12 Beta for Windows 98 1st Edition have been released !

Please refer to post #350 : http://www.msfn.org/...ic=43605&st=349 for changes/updates/reports.

Rgds

[jonazz]

Where do I find these two files? I want to find the Danish version of the files.
advpack.dll 4.72.3612.1700
explorer.exe 4.72.3612.1700

[dencorso]

jonazz, on Nov 3 2007, 02:48 PM, said:

Where do I find these two files? I want to find the Danish version of the files.
advpack.dll 4.72.3612.1700
explorer.exe 4.72.3612.1700

You'll find them in the .CABs inside the Danish version of MSIE401SP2.EXE, possibly also inside older versions of Internet Explorer 4.
advpack.dll 4.72.3612.1700 is inside ACTSETUP.CAB
explorer.exe 4.72.3612.1700 is inside IE4SHL95.CAB or, if you want the NT version, inside IE4SHLNT.CAB
BTW, you'll also find the same version of explorer.exe in all versions of Internet Explorer 5, up to IE55SP2.EXE,
but, then, the version of advpack.dll to be found will be higher than the one you asked.
HTH

This post has been edited by dencorso: 03 November 2007 - 05:29 PM

[Drugwash]

Could someone repost the English package to a decent host that I can actually download from? I've had enough posting and reposting that that stupid RapidShare has something that always tells me I'm already downloading from my IP although I'm NOT.
Thank you.

Nevermind, I had a friend download it for me. Thanks anyway.

(later edit) Thank you for the link below.

This post has been edited by Drugwash: 04 November 2007 - 12:54 PM