[doc. Imr Oman]

Hello,

You are right - my version was old. I was not able to find 2.2.2 - it appears that file was available on ALi site, but this company does not exist anymore. Anyhow, I found version 2.3 at http://www.doubleh.com.tw/, which was even newer and recognized more chipsets:
PCI\VEN_8086&DEV_24CD="Intel USB 2.0 Enhanced Host Controller"
PCI\VEN_1039&DEV_7002="SiS USB 2.0 Enhanced Host Controller"
PCI\VEN_1106&DEV_3104="VIA USB 2.0 Enhanced Host Controller"
PCI\VEN_10B9&DEV_5239="ALi USB 2.0 Enhanced Host Controller"
PCI\VEN_10DE&DEV_0068="NVIDIA USB 2.0 Enhanced Host Controller"
PCI\VEN_10DE&DEV_00D8="NVIDIA USB 2.0 Enhanced Host Controller"
PCI\VEN_10DE&DEV_0088="NVIDIA USB 2.0 Enhanced Host Controller"
PCI\VEN_10DE&DEV_00E8="NVIDIA USB 2.0 Enhanced Host Controller"
PCI\VEN_1002&DEV_4345="ATI USB 2.0 Enhanced Host Controller"
PCI\VEN_1002&DEV_4365="ATI USB 2.0 Enhanced Host Controller"


Here is part of history file:
--------------------------------------------------------
Version 2.3 includes support and fixes for the following:
* Fixed Intel hyperthreading issue with control transfers stopping
* Improved transfer aborts
Version 2.2.2 includes support and fixes for the following:
* Handle invalid endpoints
* Support IOCTL_INTERNAL_USB_GET_BUS_INFO
Version 2.2.1 includes support and fixes for the following:
* Fix D2 power state
* Fix Composite suspend problem
Version 2.2 includes support and fixes for the following:
* Improved installer
--------------------------------------------------------

Regards

[Wijono]

Hi Maximus,

That is a master-piece!!
Just would like to feedback to you, that it should be allowed to unplug the USB drive after right-click the drive in Windows Explorer and in the drop-down menu then click Eject. When we do that, your driver will come up with "Unsafe Removal of Device" popup. Would be great if this can be corrected.

[shaddam]

the supporter, cnmemory, states this drivers as generic usb 2.0 driver...
perhaps they are working ....

http://download.cnme...8USBTreiber.zip

[sunamigaza]

shaddam, on Aug 19 2005, 04:40 PM, said:

the supporter, cnmemory, states this drivers as generic usb 2.0 driver...
perhaps they are working ....

http://download.cnme...8USBTreiber.zip
<{POST_SNAPBACK}>

[sunamigaza]

Hi,

I was startled on Win98SE my USB 2.0 disk TwinMos (attached its drivers) can't be recognized by
NUSB22.
Therefore, I used winRAR to look at files in NUSB22.EXE and found that several files can be
replaced by WinME files (attached also for your perusal).
By replacing them and editing SUBSTOR.INF, then NUSB22 can recognize my TwinMos and it's
working well now.
I thought using WinME files will cover more USBs brand and might answers problems if faced by
others.
IMHO, better also provide NOVERCHECK.REG (this file from Tihiy's Revolutionary Pack and also
stated by MDGx in his Killer Replacement WIN98SE2ME) if supposed to include these WinME files
into NUSB next release.
Hope this help.

Attached File(s)

•  TwinMos.ZIP (2.29K)
  Number of downloads: 238

[Wijono]

This message is for sunamigaza.

After downloading the attachment TwinMos.ZIP and try to open it with WinZip, following error message comes up: "Cannot open file: it does not apear to be a valid archive."

Is the file corrupted?
Thx a lot.

[shaddam]

Wijono, on Aug 22 2005, 03:12 AM, said:

This message is for sunamigaza.

After downloading the attachment TwinMos.ZIP and try to open it with WinZip, following error message comes up: "Cannot open file: it does not apear to be a valid archive."

Is the file corrupted?
Thx a lot.
<{POST_SNAPBACK}>

me too... seems to be corrupted

[sunamigaza]

This message to Wijono & Shaddam:
"The total filespace required to upload all the attached files is greater than your per post or global limit. Please reduce the number of attachments or the size of the attachments." comes from MSFN.ORG
That's the probem when tried to upload the files, pls direct email me.

[sunamigaza]

Please attachment, hope it may answer Wijono & Shaddam.

Attached File(s)

•  readme.zip (6.94K)
  Number of downloads: 176

[barev]

Thanks very much to maximus-decim for this package! All is working absolutely fine for me with my USB stick and card reader. Great job!

[Wijono]

Wijono, on Aug 19 2005, 03:49 PM, said:

Hi Maximus,

That is a master-piece!!
Just would like to feedback to you, that it should be allowed to unplug the USB drive after right-click the drive in Windows Explorer and in the drop-down menu then click Eject. When we do that, your driver will come up with "Unsafe Removal of Device" popup. Would be great if this can be corrected.
<{POST_SNAPBACK}>

Thanks to sunamigaza for the SUBSTOR.INF.
Unfortunately there is no reply from Maximus regarding the possibility of using "Eject" as described in my message above.
Has someone else any idea?

[Kelsenellenelvian]

Just read through and no answer so here goes...

Can this be "Slipstreamed"? (Added in pre-install)

[chankya]

Dear Maximus

When i install 98se sp2.2 and then install USB2.2 AND then 98se2me the pen drive is not working after installing 98se2me.

i have to reinstall it again with USB2.2 what is the best sequence to install it.


thanks u.
best of luck 4 u'r mission.

[chankya]

Sorry i got it

Installation Guide

Prerequites:
- Windows 98 SE English (4.10.2222A).
- 32 MB of RAM minimum.
- At least 40 MB free hard disk space.

Installation order:
*1- Install Windows 98 SE (with or without 98lite).
*2- Install IE 6.0 SP1.
3- Install all newest drivers of your hardware.
*4- Install DirectX (9.0c).
*5- Install MS Office.
*6- Install/Use 98lite to remove any features.
7- Close ALL open programs.
8- Install latest SE SP.
*9- Install critical updates from WindowsUpdate.
*10- Install MDGx's latest 98SE2ME.
========================///
*11- Install Maximum-Decim's latest Native USB Drivers.///
====================================
*12- Install Tihiy's latest Revolutions Pack.
13- Update or re-install drivers of your hardware, if you have any problem.

[sunamigaza]

Anytime, Wijono.

AFAIK, on Windows 98SE using drivers from USB Disk vendors:
- when running Windows Explorer or double-clicking My Computer there'll be an
icon "Removable Disk" then right-clicking it will open pop-down menu which
lists i.e. "Eject" to remove USB Disk. (CMIIW)
- the eject icon (if) appears mostly only once on the System Tray when plug-in
USB Disk for the first time (CMIIW), if the USB Disk removed that icon gone.
If replug-in USB Disk that icon won't re-appear (however, the USB Disk still
working and have to use "Windows Explorer...Eject..." steps to remove USB
Disk) unless re-booting.

Since NUSB22 from M.Decim uses some of WinMe files:
- the above function of "Eject" is replaced by the icon "Unplug or eject
hardware" on the System Tray to remove USB Disk.
Therefore the above steps (Windows Explorer...Eject...) seems inapplicable
coz a pop-up menu will give a warning "Unsafe removal..." and suggesting to
use the icon "Unplug or eject hardware" on the System Tray instead.
- and that icon always appears each time re-plug USB Disk, no need rebooting.
[Win Me/XP style. Dunno of Win2k, any1 knows pls info]

PS: add 3 new lines in USBSTOR.INF, pls have a look into Readme.txt in the
revised Readme.zip

Hope this might help.

Attached File(s)

•  Readme.ZIP (6.99K)
  Number of downloads: 153

[lleoliveira]

Hi
Recently i bought a camera: Sony Cyber-Shot 3.2 Mega Pixels DSC-P32.
With Windows XP, the camera was recognize, but on Windows 98 was not recognized.
So i tried to install Maximus Decim Native USB ver.2.2.
But nothing changed, The same message appear, "searching for a driver"
 Clipboard01.png (8K)
Number of downloads: 137
I would like to know if it's possible Win98 recognize the camera like WinXP.
Just a curiosity; Is it necessary to have SYSTRAY.EXE file in windows\system?

[jasinwa]

nm - wonder why I couldnt delete my own post?

This post has been edited by jasinwa: 16 September 2005 - 03:06 PM

[le-bleuet]

Hi folks...

I have two USB 2.0 devices: an ADS enclosure (housing a DVD drive) and a Maxtor One Touch II. The problem is that they can not seem to co-exist in Win98SE. Tech support for ADS suggested that both devices may be trying to access the same driver, causing my system to hang.

Would the Maximus Decim Native USB ver.2.2 solve this conflict? Any other work around?

Thanks... :)

[nateklomp]

Hiya All,

Would it be possible to use/adapt this package for Win95 OSR2.5B with the usb support add-on?

I'm rolling out a bunch of legacy PCs and this would be really useful.

Thanks for your time.

[maximus-decim]

Native USB (NUSB) 2.2.1 update
*********************************************************************
Only .INF file!!!

Use only after installation of the NUSB 2.2 !
For installation copy the file USBSTOR.INF in the hidden
catalogue WINDOWS\INF\ with replacement of an old file.

What's new:
* Added very many new devices.


http://rapidshare.de...1e_upd.zip.html