Jump to content

Welcome to MSFN Forum
Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. This message will be removed once you have signed in.
Login to Account Create an Account


Photo

New ideas for the next version

- - - - -

  • Please log in to reply
154 replies to this topic

#51
jack99

jack99

    Banned

  • Banned
  • Pip
  • 75 posts
a free miny firewall might be handy .and all the logos plz.and maybe one more shell 32 type icon switch icl :hello:
Flash and animated signatures and avatars are not permitted.


How to remove advertisement from MSFN

#52
Lilla

Lilla

    Junior

  • Member
  • Pip
  • 68 posts

- optional: an cpucooler (like k-cpucooler) because win98 do no automatical powersaving cpu-idleing (unlike 2000 or xp)   :no:

apparently 98SE does do this if it properly installed on an ACPI BIOS
i asked about it here -
http://www.msfn.org/...showtopic=39650
but no one followed up :(

...snip...



USBMan.com advises that ACPI active can be the source of problems in Win98SE...

Windows 98 SE USB Guide
http://www.usbman.co...8seusbguide.htm

Excerpt:

Removing ACPI

ACPI active can be the source of problems in Win98SE. Windows 98SE automatically installs in ACPI mode if an ACPI BIOS is detected. Unfortunately, Win98SE does NOT handle ACPI very well and IRQ sharing with this OS is problematic. If USB is sharing its IRQ with IRQ Holder for ACPI Steering and several other devices you will need to install the OS in APM mode as outlined below.

Reinstall Windows by starting the system using the boot floppy with CDROM support.

From the A:\ prompt start Windows from the CDROM

D:\setup /p i when D:\ is the drive letter of the floppy.

If your hard drive is running from a High Point, Promise or ATA 66 or 100 controller, the drive will not be recognized at boot up and you will need to come back a letter.

A clean reinstall is recommended

#53
miko

miko

    Advanced Member

  • Member
  • PipPipPip
  • 302 posts
apparently 98SE does not properly install ACPI unless it recognises the motherboard,
(and it has a very short list, it was primarily for servers at the time of release)
you have to use a command line switch (/p j) on install to do it or alternatively -
--------------------
REGEDIT4

[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Detect]
"ACPIOption"="1"
--------------------
before the motherboard 'inf' drivers install (you will have some extra options in Display Properties > Screen Saver > Energy saving features of monitor > Settings > Power Schemes & Advanced tabs if it is installed correctly)

ACPI Steering is a solution to IRQ sharing not a problem itself.
when you see 'ACPI IRQ Holder for PCI Steering' in System Information
it doesn't mean the IRQ is shared with this 'ACPI IRQ Holder for PCI Steering' 'device'
it means the ACPI BIOS is 'Steering' the other 'device' on that IRQ to use the IRQ it is on.
the ACPI BIOS (and so all instances of 'ACPI IRQ Holder for PCI Steering') only uses IRQ 9
which is what could be sharing with the USB controller and causing a problem.

not using ACPI on an ACPI board is a sledge hammer to crack a nut option.

not using APCI disables a lot of dynamic tweaks that will make your system run better,
like the HLT instructions i mentioned and the various priority tweaks that are specified here -
http://www.mdgx.com/newtip16.htm
(note these aren't 'disabled' when ACPI is used, they're 'managed' instead and shouldn't be set)

it can also affect the correct installation of modern motherboard devices when you get to the 'inf' drivers installs,
especially on boards with tightly integrated multi-function components.

but whatever floats your boat, on older motherboards, esspecally AMD supporting chipsets, non ATX boards & power supplies, and where the BIOS isn't up to par with the specs it's probably necessary.

on my old all Intel PIII system it all works fine, only ever needed to disable USB Error Detection, but then i only have a USB gamepad, so it's not a big concern of mine.

btw your link above is borked -
http://www.usbman.co...8seusbguide.htm

MS link on command line switches -
http://support.micro...com/kb/q186111/

#54
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • OS:98SE
  • Country: Country Flag
Has anybody tried the USB Mass Storage driver that is available in source form, so it could be accomodated for many different types?

http://support.micro...b;en-us;Q257751

Petr

#55
azagahl

azagahl

    Advanced Member

  • Member
  • PipPipPip
  • 489 posts
Does SP2 install MSVCP60.DLL (a Visual C++ 6 runtime library)?

If not, I suggest that SP2.1 install it. It is installing VB runtime libraries, I believe.

#56
Gape

Gape

    Author - Unofficial Win98 SE SP

  • Member
  • PipPipPip
  • 498 posts
  • OS:98SE
  • Country: Country Flag

Does SP2 install MSVCP60.DLL (a Visual C++ 6 runtime library)?

If not, I suggest that SP2.1 install it. It is installing VB runtime libraries, I believe.

<{POST_SNAPBACK}>

SP 2.0/2.0.1 installs it.

#57
eGo®Z

eGo®Z

    Junior

  • Member
  • Pip
  • 70 posts

Has anybody tried the USB Mass Storage driver that is available in source form, so it could be accomodated for many different types?
http://support.micro...b;en-us;Q257751
Petr

<{POST_SNAPBACK}>

Of course :) And the most usb-drive makers also use it. UFD.SYS - one of them, and i can add much more examples. I think You have so much advance to check many of them. Some driver makers even have not changed original file name and file version (umss.sys, 5.0.1868.1). Some of them have changed file name, but leaved version the same. And so on.
But this one can not be considered as an universal driver like usbstor.sys, unfortunately. Usbstor covers the most of the devices, but not all.

#58
Eck

Eck

    Senior Member

  • Member
  • PipPipPipPip
  • 669 posts
Heh. On my really old first computer, an HP Pavilion 4430, the HP restore disk image has Windows 98 (Gold) installed in ACPI mode, but if Windows is installed fresh with a real cd I needed to use the setup /p j. Otherwise Windows installs as standard computer with APM. I wouldn't have minded, but without ACPI that machine wouldn't detect any USB devices if I installed a PCI videocard.

ACPI is good.
Epox EP8KRAIPRO AthlonXP3200+ NVidia GeForce 6600GT AGP Audigy 2 ZS Crucial 2x1024MB 3200 RAM

#59
eGo®Z

eGo®Z

    Junior

  • Member
  • Pip
  • 70 posts
Gape
i think U're still remember about some addon into infex.exe?
i mean "context short-description option" for the selected items in the options list.
also i think it will be very usefull to add "radiobuttons" here also.
In some cases i need this. For example different icon styles - only one style can be selected during the install. Another one - hotfix KB891711. I can continue :)

#60
Gape

Gape

    Author - Unofficial Win98 SE SP

  • Member
  • PipPipPip
  • 498 posts
  • OS:98SE
  • Country: Country Flag
Up!

I revised the list. Please look at the first post.

#61
pykor

pykor

    Newbie

  • Member
  • 20 posts

High priority:
- Add EXTRACT.EXE from IE 6.0 SP1.
- Remove modified EXPLORER.EXE and SHELL32.DLL files.
- Optional fix for IE 6.0 SP1 file deletion problem with IE 5.5 SP2 files.
- Install "MaxFileCache" fix on only 512+ MB of RAM systems.
- Petr's UPDATE.SYS work.
- Better FORMAT and FDISK tools.

Low priority:
- Tweak: Change the Number of Simultaneous Connections.
- Add QFE info.


Can some of these be explained? Just wondering what some of this stuff means?

#62
Gape

Gape

    Author - Unofficial Win98 SE SP

  • Member
  • PipPipPip
  • 498 posts
  • OS:98SE
  • Country: Country Flag

Can some of these be explained? Just wondering what some of this stuff means?

<{POST_SNAPBACK}>

I revised the list, again. Please look at it.

Can you be more specific?

#63
ivman

ivman

    Newbie

  • Member
  • 30 posts

First ... let me say ... I LOVE WIN98 SE SP 2

As someone who thinks Win98 is the best OS for any PC, it's great to have something that not only updates, but gathers together all the best ideas into one area. It's the way software always should be.


Anyway, my favorites include:
---------------------------------------------------------
-- Notepad. WOW! This is so much better than the original. Anyone that doesn't like it must also prefer to wash their clothes in a running stream instead of using a washing machine.


I have a personal favorite - NoteTab Light found at http://www.notetab.com

It is a tabbed text editor and it will convert text to html at the click of a button. You can have it replace Notepad or revert to Notepad also.

I am not suggesting that you add this to the SP, especially since it's not open source, but it is freeware that any of you could download and install on your computers. I love it! Give it a try.

ivman

#64
jeeva

jeeva

    Member

  • Member
  • PipPip
  • 138 posts
For me it's no problem which notepad replacement you take, but if it's Metapad, please replace the icon, it looks bad, the pink color make it look like a children's toy, just my opinion, don't know what others say, but I think it makes it worse because of that...

#65
azagahl

azagahl

    Advanced Member

  • Member
  • PipPipPip
  • 489 posts
Notepad. WOW! This is so much better than the original.

It is much better. But, is it just me, or does it take way too long to open large (e.g. 5 MB) text files?

#66
pykor

pykor

    Newbie

  • Member
  • 20 posts

I revised the list, again. Please look at it.

Can you be more specific?


OK. Well first, thanks for the link regarding Petr's UPDATE.SYS work. That was a very interesting read and made me think more about what really does get upgraded when Windows updates files.

I guess my main question regards these bullets:
- Add EXTRACT.EXE from IE 6.0 SP1.
- Add IPROP.DLL from NT 6.0 SP6a.

What updates were done to EXTRACT that would be needed. It's just an unpacking tool, correct? And what can you tell me about IPROP.

This bullet needs some clairification also:
- Optional fix for IE 6.0 SP1 file deletion problem with IE 5.5 SP2 files.

I think the main reason I ask this is based on the Order of Install:

If someone follows the path:
-- Full 98 SE install
-- Apply UNOFFICIAL SE SP2.0.1
-- Upgrade DirectX 9.0c
-- Apply IE 6.0 SP1
-- etc. etc. etc.

should the order then be reversed?
-- Full 98 SE install
-- Upgrade DirectX 9.0c
-- Apply IE 6.0 SP1
-- Apply UNOFFICIAL SE SP2.0.1
-- etc. etc. etc.

And what is the "file deletion problem" anyway?

#67
Gape

Gape

    Author - Unofficial Win98 SE SP

  • Member
  • PipPipPip
  • 498 posts
  • OS:98SE
  • Country: Country Flag

What updates were done to EXTRACT that would be needed. It's just an unpacking tool, correct? And what can you tell me about IPROP.

You're right about EXTRACT.EXE. Probably every Windows 98 installation has it, SP will update it with the newer version.

IPROP.DLL is a part of DCOM (Distributed COM). Probably most Windows 98 installation has it, SP will update it with the newer version.

This bullet needs some clairification also:
- Optional fix for IE 6.0 SP1 file deletion problem with IE 5.5 SP2 files.

Please look at this link: Win98 hangs or locks up when deleting files. I also added this link into the my new features list.

I think the main reason I ask this is based on the Order of Install:

Did you look at the my Installation Guide?

#68
swgreed

swgreed

    Unofficial Service Pack & Codec Pack maintainer

  • Member
  • PipPipPip
  • 454 posts

-- MS released MDAC 2.8 SP1 on 5/10/2005. Will that be included someday? More importantly, is there *any* MDAC upgrades installed?


what about adding the actual MDAC 2.8 permanetly to the SP (instead of the already included version 2.1)?

#69
MDGx

MDGx

    98SE2ME + 98MP10

  • Super Moderator
  • 2,678 posts
  • OS:none specified
  • Country: Country Flag
Gape:

The old delete files > 50 MB with IE6 bug decribed here:
http://www.frankprov...ilesproblem.htm
has been fixed by MS in newer versions of:
BROWSEUI.DLL = latest IE 6.0 SP1 security patch:
http://www.mdgx.com/ietoy.htm#IEC
BROWSELC.DLL = build 6.00.2900.2180 from XP SP2:
http://www.mdgx.com/xp.htm#SP2
I'm using this file for 6 months now, and had no errors.
I'm also using these other files [not counting the 21 WMP9 files ;)] from XP SP2, with zero problems so far:

ADVPACK.DLL
ASCTRLS.OCX
CABINET.DLL
PNGFILT.DLL
SHDOCLC.DLL
SQLSRV32.DLL

and these files from 2003 SP1:

MSHTML.TLB
MSHTMLED.DLL
MSHTMLER.DLL

About MDAC:
MS stated that this [2.1 SP1] is the last MDAC release they posted as separate update package on their servers.
From now on all MDAC updates will be released only as part of future service packs for XP, 2003 + Longhorn.

Hope this helps.

#70
Gape

Gape

    Author - Unofficial Win98 SE SP

  • Member
  • PipPipPip
  • 498 posts
  • OS:98SE
  • Country: Country Flag

The old delete files > 50 MB with IE6 bug decribed here:
http://www.frankprov...ilesproblem.htm
has been fixed by MS in newer versions of:
BROWSEUI.DLL = latest IE 6.0 SP1 security patch:
http://www.mdgx.com/ietoy.htm#IEC
BROWSELC.DLL = build 6.00.2900.2180 from XP SP2:
http://www.mdgx.com/xp.htm#SP2
I'm using this file for 6 months now, and had no errors.

<{POST_SNAPBACK}>

Thanks!

Can anyone else confirm that?

#71
MDGx

MDGx

    98SE2ME + 98MP10

  • Super Moderator
  • 2,678 posts
  • OS:none specified
  • Country: Country Flag
Gape:

I don't think adding IPROP.DLL from NT4 SP6a is a good idea.
Look at the different sizes + builds:
IPROP.Source   Size       Build         Date
=================================================
IPROP.DCOM98   96,016    4.0.1381.6     8-20-1997
IPROP.NT4SP6a  96,016    4.0.1381.326  11-18-1999
IPROP.98FE    110,592    4.0.1381.4     5-11-1998
IPROP.98SE    110,592    4.0.1381.4     4-23-1999
IPROP.ME      110,592    4.0.1381.4     6-08-2000
Newest is from DCOM98.
Oldest is from NT4 SP6a.
Looking at the different sizes, the code is probably [?] different on 9x from NTx.
From MSDN database [not sure if this article helps]:
http://msdn.microsof...openpropstg.asp

----------------------------------------

Edit:

DOS based Format + Fdisk alternatives [all are free GPL]:
http://www.mdgx.com/secrets.htm#FDPT
These are the ones I'm talking about:

* FIPS v2.0 16-bit for DOS FAT32 dynamic nondestructive hard disk (re)partitioner:
http://www.igd.fhg.de/~aschaefe/fips/
Direct download [158 KB, free GPL]:
http://www.igd.fhg.d...fips/fips20.zip

* Free FDISK v1.3.0 16-bit [also part of FreeDOS: http://www.freedos.org/]
improved Microsoft FDISK.EXE replacement for DOS partitions/resizes hard disks
up to 180 GB, supports Microsoft's FDISK undocumented parameters (see below),
FAT32 and non-DOS partitions, extended command line for batch disk cloning,
includes BootEasy compact multiboot loader, highly customizable:
http://www.23cc.com/free-fdisk/
Direct download [195 KB, free GPL]:
http://www.23cc.com/...ms/fdisk130.zip
Courtesy of Brian, author of Free FDISK.

* XFDisk v0.9.3 Beta 16-bit for DOS, Windows 9x/NT/2000/ME/XP/2003, Linux and
OS/2 partitions/resizes hard disks up to 1 TB, includes Boot Manager:
http://www.mecronome.de/xfdisk/
Direct download [41 KB, free GPL, English]:
http://www.mecronome...es/xfd093en.zip

* FORMAT.EXE v0.91 16-bit [also part of FreeDOS: http://www.freedos.org/]
improved Microsoft FORMAT.COM replacement for MS-DOS 5/6 + Windows 9x/ME [86
KB, free GPL]:
http://www.23cc.com/...ams/xmat091.zip

#72
Petr

Petr

    Friend of MSFN

  • Member
  • PipPipPipPipPip
  • 981 posts
  • OS:98SE
  • Country: Country Flag

* Free FDISK v1.3.0 16-bit [also part of FreeDOS: http://www.freedos.org/]
improved Microsoft FDISK.EXE replacement for DOS partitions/resizes hard disks
up to 180 GB, supports Microsoft's FDISK undocumented parameters (see below),
FAT32 and non-DOS partitions, extended command line for batch disk cloning,
includes BootEasy compact multiboot loader, highly customizable:
http://www.23cc.com/free-fdisk/
Direct download [195 KB, free GPL]:
http://www.23cc.com/...ms/fdisk130.zip
Courtesy of Brian, author of Free FDISK.

There are problems with this FDISK - or maybe some uncertainity.
http://www.23cc.com/free-fdisk/ page refers to version 1.2.1 only (last stable version) and there is also written as the first feature: "Supports hard disks up to 128GB in size." but also "Free FDISK 1.1.1 (Beta) has been tested with hard disks up to 180GB in size."
It seems that 1.3.0 is beta version only.
Please read all attached files, I'm not sure that it is suitable for everybody.
It is GPL, it means some obligations, like adding the GPL license and providing source code either directly or a reference (I'm not expert on GPL)
For localized SP versions it would be necessary to translate this FDISK, compile it., and distribute the source code. Unfortunately, "International language support will be completed in a future release." - that will probably never appear. :-(
I'm not sure if this software is still maintained, it does not look like this.
Brian did not responded to my e-mail.

* FORMAT.EXE v0.91 16-bit [also part of FreeDOS: http://www.freedos.org/]
improved Microsoft FORMAT.COM replacement for MS-DOS 5/6 + Windows 9x/ME [86
KB, free GPL]:
http://www.23cc.com/...ams/xmat091.zip

I cite:
Known bugs/problems:
1. Will, under some circumstances, fail to format due to dma overruns.
2. The FAT32 format may not be compatible with MS's operating systems.
and all the above mentioned uncertainities.

<{POST_SNAPBACK}>


I think that the above mentioned FDISK and FORMAT tools are not good replacement of standard W98 FDISK and FORMAT. I'd suggest them as an addition for >137GB disks, but not as standard.

Serious testing shall be done.

Petr

#73
MDGx

MDGx

    98SE2ME + 98MP10

  • Super Moderator
  • 2,678 posts
  • OS:none specified
  • Country: Country Flag

Serious testing shall be done.

Good point.
I've never used these tools [I use Partition Magic 8 exclusively], and my [2-3 years old] knowledge of these programs comes only from reading about other users' experiences.

I posted them here only because these are the best free [GPL] tools I'm aware of.
I really hope [some of these] turn out ok, so Gape can add them to future SP releases.

#74
erpdude8

erpdude8

    MSFN Master

  • Member
  • PipPipPipPipPipPipPipPip
  • 2,139 posts

Gape:

I don't think adding IPROP.DLL from NT4 SP6a is a good idea.
Look at the different sizes + builds:

IPROP.Source   Size       Build         Date
=================================================
IPROP.DCOM98   96,016    4.0.1381.6     8-20-1997
IPROP.NT4SP6a  96,016    4.0.1381.326  11-18-1999
IPROP.98FE    110,592    4.0.1381.4     5-11-1998
IPROP.98SE    110,592    4.0.1381.4     4-23-1999
IPROP.ME      110,592    4.0.1381.4     6-08-2000
Newest is from DCOM98.
Oldest is from NT4 SP6a.
Looking at the different sizes, the code is probably [?] different on 9x from NTx.
From MSDN database [not sure if this article helps]:
http://msdn.microsof...openpropstg.asp

----------------------------------------

<{POST_SNAPBACK}>


MDGx,

I have NO problems whatsoever using iprop.dll from NT4 SP6a under my WinME computer and my neighbor's Win98 machine. so to me, it's pretty much safe to use it. No, newest IS the one from NT4 SP6a. I interpret iprop.dll from NT4 SP6 as version 4.00.1381.0326 and iprop.dll from dcom95/dcom98 as version 4.00.1381.0004.

#75
patchworks

patchworks

    Member

  • Member
  • PipPip
  • 249 posts
  • OS:Windows 7 x64
  • Country: Country Flag
Dunno if it's a blasphemy here, but what about Ieradicator ?

http://www.litepc.com/ier_lic.html

:whistle:




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users



How to remove advertisement from MSFN