[MDGx]

crashnburn, on May 24 2005, 04:16 PM, said:

already on to that.......... thanks for the reply but if you could lead me to the registry or ini area that i could reconfigure that particular tray area as it also encloses the task scheduler so i can 'play' with it............

This is where TClockEx writes into the registry:

REGEDIT4

; all users reg key:
[HKEY_USERS\.Default\Software\TClockEx\Settings]
"ClockFormatString"="MM-dd-yy ff"
"TooltipFormatString"="dddddddddd MMMM dd yyyy"

; current user reg key:
[HKEY_CURRENT_USER\Software\TClockEx\Settings]
"ClockFormatString"="MM-dd-yy ff"
"TooltipFormatString"="dddddddddd MMMM dd yyyy"

These are the values I use.
U need to change them if u like a different display.

Nonetheless, I still recommend to make these changes from the UI:
right-click on the tray TClockEx display -> TClockEx Properties -> Clock Format tab -> make your changes -> OK.
This is the bugs list + how to use case sensitive date strings:
http://www.rcis.co.z...lockex/bugs.htm
FAQ:
http://www.rcis.co.z...clockex/faq.htm

Note that TClockEx works also with Windows 2000/XP/2003/Longhorn.

Hope this helps.

[JEGjr]

I've been looking all over the internet for something like the: 98SE2ME.EXE

I bought a mass storage device in Hong Kong w/ no driver (didn't need one for XP). But I've been trying to find a driver so I can use it on my old laptop w/ 98SE. Found this site finally, and installed the 98SE2ME.EXE My computer finally recognized a driver. When I click on the Device Manager the note states: "This device is working properly", and that it accepted this driver. I also now show the little "safe to remove" icon in the lower right toolbar. BUT, I cannot access the device. I never get an icon in My Computer that allows me access it. I have tried other avenues and have turned up empty as well. Any suggestions? Please. Thanks.

[krick]

JEGjr, on May 25 2005, 08:02 PM, said:

I bought a mass storage device in Hong Kong w/ no driver (didn't need one for XP).  But I've been trying to find a driver so I can use it on my old laptop w/ 98SE.  Found this site finally, and installed the 98SE2ME.EXE  My computer finally recognized a driver.  When I click on the Device Manager the note states: "This device is working properly", and that it accepted this driver.  I also now show the little "safe to remove" icon in the lower right toolbar.  BUT, I cannot access the device.  I never get an icon in My Computer that allows me access it.  I have tried other avenues and have turned up empty as well.  Any suggestions?  Please.  Thanks.
<{POST_SNAPBACK}>

Have you tried installing this...

Maximus Decim Native USB Pack ver.2.2
http://www.msfn.org/...showtopic=43605

Also, is the mass storage drive formatted? In order to see it, I believe that it needs to be formatted somehow if it isn't already formatted correctly from the factory.

It's kind of like hooking up an unformatted hard drive to your computer. Until you format it, it doesn't show up with a drive letter in My Computer.

[JEGjr]

Quote

is the mass storage drive formatted?

Thanks for the reply Krick. Does it have to be reformatted for Win98SE? I don't know. It works fine in XP. I think you may be right though, I mean the computer is doing everything right now - it finally accepted a driver and is showing signs of life. But still no drive letter in My Computer (which I do get in XP).

[JEGjr]

BTW - Yes, I did try "Maximus Decim Native USB Pack ver.2.2", that didn't work. If I can't get this thing to work, I have plan B. You see, I'm going on vacation and need to be able to transfer all of my pics from the flash cards to something larger, and all I have is this old laptop. Well, I found another alternative that will work. I'm posting it here in case any one else is interested. A guy has reworked a Microsoft driver so that you can connect your Ipod to Windows98 (I have SE, and it worked for me), and use it as a mass storage device (I have the 40GB Ipod, and it worked for me. He hadn't tested that one yet). You cannot install I-tunes, but you will get the Ipod drive letter in My Computer that will enable you to use it for storage. Here's the LINK.

[reguerra]

Hello, 98SE2ME is really fantastic. Thanks.
But I have 2 litlle problems with it, the first (more important) is that after 98SE2ME installation I can't use RasPPPOE (software to connect to adsl using dial-up standard window). It doesn't recognize the "pseudo modem driver" installed. Desinstalling or reinstalling doesn't helps.
Second (not very important) is that the links to "my documents", "my networks places", "my computer", etc. in windows explorer doesn't works at all (option 3 installed).
Thanks in advance and congratulations for your work

[MDGx]

JEGjr, on May 25 2005, 08:02 PM, said:

I've been looking all over the internet for something like the: 98SE2ME.EXE

I bought a mass storage device in Hong Kong w/ no driver (didn't need one for XP).  But I've been trying to find a driver so I can use it on my old laptop w/ 98SE.  Found this site finally, and installed the 98SE2ME.EXE  My computer finally recognized a driver.  When I click on the Device Manager the note states: "This device is working properly", and that it accepted this driver.  I also now show the little "safe to remove" icon in the lower right toolbar.  BUT, I cannot access the device.  I never get an icon in My Computer that allows me access it.  I have tried other avenues and have turned up empty as well.  Any suggestions?  Please.  Thanks.

All I can think of right now:
1. install 98SE SP 2.0.1:
http://exuberant.ms11.net/98sesp.html
2. Install 98SE2ME:
http://www.mdgx.com/4
3. Install Native USB 2.0 Drivers:
http://www.msfn.org/...showtopic=43605
4. Make sure you have no USB:
http://www.mdgx.com/98-5.htm#FWUE
or power/ACPI/APM errors/conflicts:
http://www.mdgx.com/newtip15.htm#MYP
5. Install manufacturer drivers for your USB device, starting with drivers made of WinME (if u find any, and if they'll allow u to install them on 98SE), otherwise install 98SE specific drivers.
In certain cases even 2000/XP specific drivers may work [INF files can be modified to accept 98SE/ME], it's all a "try-and-error" game.

USB stuff [see the USB related links]:
http://www.mdgx.com/drv.htm#DRV

Hope this helps.

[MDGx]

reguerra, on May 26 2005, 10:42 AM, said:

Hello, 98SE2ME is really fantastic. Thanks.
But I have 2 litlle problems with it, the first (more important) is that after 98SE2ME installation I can't use RasPPPOE (software to connect to adsl using dial-up standard window). It doesn't recognize the "pseudo modem driver" installed. Desinstalling or reinstalling doesn't helps.
Second (not very important) is that the links to "my documents", "my networks places", "my computer", etc. in windows explorer doesn't works at all (option 3 installed).
Thanks in advance and congratulations for your work

Thanks a lot for your kind appreciation.

About your RASPPPOE problem, try this:
After installing 98SE2ME, replace these files from %windir%\SYSTEM :

NDSWAN16.DLL
NDSWAN32.DLL
NETAPI.DLL
NETAPI32.DLL
NETDI.DLL
NETOS.DLL
RASAPI16.DLL
RASAPI32.DLL
RNAUI.DLL

with their older Win98 SE couterparts [which probably were on your computer before u installed 98SE2ME] from the 98 SE setup CD CABs.
Or if u backed up your OS in C:\W98SEOLD [by running 98SE2ME options 1 or 2], restore these files from there.
This zip has a text file called CABL98SE.TXT with the exact location of these files:
http://www.mdgx.com/files/EXTCAB.ZIP
More info on extracting files from CABs:
http://www.mdgx.com/last4.htm#EXTRACT
To replace some of these files u need to hold down Shift + F5 at the same time during BIOS boot POST (Power On Self Test) sequence to boot into native/true MS-DOS [or boot from a 98SE boot floppy to native MS-DOS], and then move them to %windir%\SYSTEM [usually C:\WINDOWS\SYSTEM].
Replace these files in small groups, for example start with:

NDSWAN16.DLL
NDSWAN32.DLL

if that doesn't work, then replace:

RASAPI16.DLL
RASAPI32.DLL

if that doesn't work, then replace:

RNAUI.DLL

and only after that:

NETAPI.DLL
NETAPI32.DLL
NETDI.DLL
NETOS.DLL

Reboot normal back into Windows.
See if that fixes your DSL modem problem, and then please post here your findings.
If that is the case, and those files are the "culprit", please let me know so I can remove them from 98SE2ME.
Thanks.

About links to "my documents", "my networks places", "my computer" not working after installing option 3:
I need more details:
what language is your OS?
If it is any language other than English, it doesn't work properly.
98SE2ME is designed specifically for English editions only.
Please see the "FAQ" chapter in READ1ST.TXT:
http://www.mdgx.com/9s2m/READ1ST.TXT
for more details.
Also, if u installed Tihiy's Revolutions Pack, that makes massive changes to the interface, and if that is the case, u need to ask Tihiy, the author:
http://www.msfn.org/...showtopic=39333

Hope this helps.

[Tihiy]

USER.EXE without proper USER32.DLL will cause LOCKUP!
Have you deleted USER32.DLL also?

[MDGx]

Tihiy, on May 27 2005, 06:38 AM, said:

USER.EXE without proper USER32.DLL will cause LOCKUP!
Have you deleted USER32.DLL also?

Yeah, I've removed both, posted the update, experimented again, then my mouse [+ Intellipoint 4.12 installed] started to move erratically [with USER.EXE + USER32.DLL 4.10.2231 for 98SE], and in the end I thought...
this [USER.EXE + USER32.DLL 4.90.3001] is one of the best features of all ME replacements, so I put them back in.
So my little "experiment" is over now.

[chankya]

Dear MDGx

Great Success in this proj. what about silent update for advance user like /q /n in 98setoMe in dos/windows mode.

and kindly post here a full proof proj. just like the one u posted on 15/05/05 with info that it's most tested one so someone can rely better that the beta version i think u like the idea so that u can name it as beta ver for tester.

what about adding xp component i am still waiting for that. 98MEXP Edition.


by4now.

WWW.MDGX.COM

Best Site for All Microsoft Operating System All Latest Updates Patches is There even LINUX tutorials and u dont like GAMES

Best ever Explorer Firefox

MSFN ENJOY !!!

THANKS to all LOVEING people for there sweet suggestions to improve this mission.

[MDGx]

chankya, on May 27 2005, 11:45 AM, said:

Great Success in this proj. what about silent update for advance user like /q /n in 98setoMe in dos/windows mode.

and kindly post here a full proof proj. just like the one u posted on 15/05/05 with info that it's most tested one so someone can rely better that the beta version i think u like the idea so that u can name it as beta ver for tester.

what about adding xp component i am still waiting for that. 98MEXP Edition.

Sorry, but I'm afraid this is not currently possible, because the 98SE2ME installer as it is today, is made up of 2 parts:
1. the part that installs in C:\9!M = does not make any changes to your 98SE OS.
This part is compiled with Inno Setup installer:
http://www.jrsoftware.org/isinfo.php
2. the part that installs the WinME system files = does make changes to your 98SE OS.
This part is made up of a bunch of batch, INF + REG files, all of which run from within 98SE2ME.PIF.
Because of this structure, it is not possible to run unattended with /C /Q /T:<path> etc switches, which are specific only to installer executables compiled with MS iexpress/cab sdk and similar tools.
Maybe in the future, and/if/when I have time, I'll redesign the entire installer from scratch using Iexpress or similar tools. And if/when I'll do this, I'll post it all here.

About "fool proof" 98SE2ME:
obviously that is very hard to achieve, because 98SE2ME replaces too many files from the WinME CD [~ 710 as of current release], not to create any bugs, errors, minor annoyances, incompatibilities etc.
So unfortunately there is always a "trade-off" and error margin we need to account for.
But, I can tell you that most major bugs have been squashed as far as I'm aware.
Please read the "KNOWN BUGS + FIXES" chapter in READ1ST.TXT for details:
READ1ST.TXT

About 98SE2XP:
I'm now experimenting with 2003 SP1, so I think these 2 should be treated as 1 from the point of view of creating install scripts.
As soon as I'm sure all these system files work ok, I'll post some scripts here + at my site, and will let everybody know.
Untill then, you can cut + paste my scripts from:
http://www.mdgx.com/98-5.htm#KRM9S
if u wish to install XP SP2 components [not available separately as installers] on your computer.
Similarly, u can d/l 2003 SP1 [330 MB ]:
http://www.mdgx.com/ws3toy.htm#SP1
and then modify the XP SP2 scripts at URL above to extract + copy these files from 2003 SP1 to:

- %windir% :

HH.EXE

- %windir%\SYSTEM :

HHCTRL.OCX
HHSETUP.DLL
ITIRCL.DLL
ITSS.DLL
MSHTML.TLB
MSHTMLED.DLL
MSHTMLER.DLL
RICHED20.DLL
USP10.DLL

- %windir%\FONTS :

ARIAL.TTF
ARIALBD.TTF
ARIALBI.TTF
ARIALI.TTF
COUR.TTF
COURBD.TTF
COURBI.TTF
COURI.TTF
GEORGIA.TTF
GEORGIAB.TTF
GEORGIAI.TTF
GEORGIAZ.TTF
MICROSS.TTF
TAHOMA.TTF
TAHOMABD.TTF
TIMES.TTF
TIMESBD.TTF
TIMESBI.TTF
TIMESI.TTF
VERDANA.TTF
VERDANAB.TTF
VERDANAI.TTF
VERDANAZ.TTF

HTML Help files above can also be installed separately:
http://www.mdgx.com/web.htm#HHU
or as part of Gape's SP 2.0.1:
http://exuberant.ms11.net/98sesp.html

Also, if you're wondering what actual files I'm going to include inside 98SE2XP/98SE22K3 installers, I need to tell you that I'm not going to add any files from XP SP2 or 2003 SP1, but only the scripts which will allow you to download these service packs, a dos console command line tool which will extract the files to a temp folder, a couple of DOS detection tools to make sure they can't be installed on anything else except 98SE [see the 98SE2ME free DOS tools I'm using], and that's it.

Note that all these files are from the English releases, and are meant *only* for the English release.
I'm not familiar with any other language releases, so I don't know which files work or which don't.

Hope this helps.

[chankya]

Dear MDGx

Thanks for u'r well explained answer.

As u mentioned in http://www.mdgx.com/98-5.htm#KRM9S



FIRST install the "WINDOWS 98 SECOND EDITION (SE) ESSENTIAL FREE UPGRADES + FIXES" AND the Unofficial Windows 98 SE Service Pack (SP) 2.0.1 [15.5 MB, English, free], and ONLY AFTER that replace Win98 SE system files with the ones from WinME listed below!

Is unofficial SP2.0.1 dosenot contain all updated so we still require
"WINDOWS 98 SECOND EDITION (SE) ESSENTIAL FREE UPGRADES + FIXES"
before killer replacement.

i have found these updates if u like i can send it's around 50 files 58MB

273991_A3D4C8D71DDD5905F41EF36B5BB3E07C73C1EAE6[1].EXE
323172_98_8C18CC16D21737816C36ABE51EB16E21A190BEB5[1].EXE
323255_W98_edcf77d7d30b955b4b251552ee51748[1].EXE
329115_W98_E99E3479AB8198E03FE5A107BDBBC962BC6C333E[1].EXE
811630_W98_CF47941DB1D6B7747FE9FB7EEA966E0198E88326[1].EXE
823559USA8.EXE
823559USA8_0e714506b380e4be11ff07b31da9da9[1].EXE
DirectX9-KB819696-x86-ENU.exe
DirectX9-KB819696-x86-ENU_977f8cc86c1e151a0168d1296210913[1].exe
JS56MEN.EXE
JS56_15B3577990DA7650A1E79DCAA51851CD0E041639[1].EXE
MPSetup.exe
Q320920.EXE
Q330994.EXE
Q824145.EXE
Q832894_a56d1a98d775e1031c72934a0baa9d7[1].exe
WindowsMedia71-KB817787-x86-ENU_d7d598b87d35de7e883e07a6b786c8f[1].exe
273991USAM.EXE
msjavwu_8073687b82d41db93f4c2a04af2b34d[1].exe
q313829.exe
q313829_5EEDD33FA704078BE5873EFA6E8C3D62B82C2EFF[1].exe
q316059.exe
q329414_mdacall_x86.exe
q329414_mdacall_x86_6455F9E15D1FD876A354AC196BCE848B4EA39180[1].exe
259728_1F6BE1EC0FCD72AB4A8D0FBB4E6A82918E888392[1].EXE
q824145_76dd839870a655458701c0b937b91d6[1].exe
q824150.exe
q827667.exe
scr56en.exe
vbrun60sp5.exe
wm320920_64.exe
wm320920_71_24C932549D7BCFAB6954D52590DB7C146A42E8BB[1].exe
256015_A570D63F5E6B4F80CC852D2C802AC7D14B32614F[1].EXE
245729US8_4D1A7A9CD3703E514D051595BB16A3BC69A0ABE8[1].EXE
238453US8_CFED25E588C85FDF548557F04A09892055011D7C[1].EXE
WindowsMedia9-KB819639-x86-ENU_bfd620da8e1529c3e4ffadfb93f33fa[1].exe
190656_98UP.EXE
216641up.exe
220460_98up.exe
240075UP.EXE
241134usa8.exe
242975USA8.EXE
243450USA8.EXE
256015USA8.EXE
263044USA8.EXE
4756US8.EXE
811630USA8.EXE
dun14-98.exe
310695usam.exe
wucsp.exe
y2k.exe
273991USA8.EXE
98ZAK.EXE
q330994_257f5a9aeead109bc4c764ae1b5b00f[1].exe

is it sufficient before installing sp2.0.1 and 98se2me.

thanks and bye

MSFN ENJOY!!!

[reguerra]

About your RASPPPOE problem, try this:
After installing 98SE2ME, replace these files from %windir%\SYSTEM :
Replace these files in small groups, for example start with:

NDSWAN16.DLL
NDSWAN32.DLL

if that doesn't work, then replace:

RASAPI16.DLL
RASAPI32.DLL

if that doesn't work, then replace:

RNAUI.DLL

and only after that:

NETAPI.DLL
NETAPI32.DLL
NETDI.DLL
NETOS.DLL

Reboot normal back into Windows.
See if that fixes your DSL modem problem, and then please post here your findings.
If that is the case, and those files are the "culprit", please let me know so I can remove them from 98SE2ME.

About links to "my documents", "my networks places", "my computer" not working after installing option 3: I need more details:
what language is your OS?


[/quote]

Hello MDGx,
thank you very much for your reply.

I replaced the files you said, under pure DOS, but the problem continues.
I'm sending a few screen captures for you.
My OS is Win98SE English version + SP2.0 + 98SE2ME
Tihiy package NOT installed.

Thank you.

 raspppoe1.jpg (24.61K)
Number of downloads: 59
 raspppoe2.jpg (12.63K)
Number of downloads: 48
 raspppoe3.jpg (52.73K)
Number of downloads: 114

[MDGx]

reguerra:
I have received this feedback from a concerned 98SE2ME user who tested his ADSL modem in a similar environment, with 98SE2ME option 1 or 2 installed [they both install exactly the same ME files], and his conclusion is...

Quote

Some time ago someone reported trouble with 98SE2ME on a computer with a USB ADSL modem.
Today [5-29-2005]I installed 98SE2ME (without option 3) on a Pentium II system with a USB ADSL modem.

At first, no internet connection could be established, though the ADSL modem itself reported it had connected successfully. But after re-installing TCP/IP and Client for Microsoft Networks, connection worked fine.

It was often necessary to reset the IP adresses etc... with winipcfg.exe to get a connection, but this is not related to 98SE2ME because it already was necessary in pure 98SE on this system.

98SE2ME option 3 files have nothing to do with the internet/network connection, because installs only UI + Shell controls [quoted from READ1ST.TXT]:

Option 3 installs these newer WinME system files [Windows User Interface (UI) Controls]:
=> %windir% (usually C:\WINDOWS):
- Windows Explorer = EXPLORER.EXE build 5.50.4134.100
=> %windir%\SYSTEM (usually C:\WINDOWS\SYSTEM):
- Common Dialog 32-bit Control = COMDLG32.DLL build 5.50.4134.100
- Active IMM Server = DIMM.DLL build 5.00.3000.1
- OLE DOCument Properties = DOCPROP.DLL build 5.00.2136.1
- OLE DOCument Properties 2 = DOCPROP2.DLL build 5.00.2136.1
- Fonts Folder Control = FONTEXT.DLL build 4.90.3000
- My DOCuments Folder Control = MYDOCS.DLL build 5.50.4134.100
- Map Network Drives/Network Places Wizard = NETPLWIZ.DLL build 5.00.2136.1
- Effects Control = PLUSTAB.DLL build 5.00.2136.1
- Shell 32-bit Control = SHELL32.DLL build 5.50.4134.100
- Image Preview Control = SHIMGVW.DLL build 5.50.4134.100
- Shell Scrap Object Handler = SHSCRAP.DLL build 5.00.2136.1
- Web View Control = WEBVW.DLL build 5.50.4134.100
- Customize Folder Wizard = IESHWIZ.EXE build 5.50.4134.100

Exception:
NETPLWIZ.DLL = only maps remote drives/UNC addresses as local drive letters.

Please try to reset/reconfigure/reinstall/repair TCP/IP protocols + Client for MS Networks, and see if it works. These may help:
Winsock/TCP/IP (DUN/RAS) + Layered Service Provider (LSP) 32-bit repair tools (freeware):
http://www.careyholz...om/netfixes.htm
- WinsockXPFix for Windows 9x/2000/ME/XP:
http://www.iup.edu/h...net/winfix.shtm
Direct download [1.34 MB]:
http://www.iup.edu/h...insockXPFix.exe
- SockFix for Windows 9x/ME:
http://www.lavasoftusa.com/
Direct download [33 KB]:
http://digital-solut...ft/whndnfix.zip
- Winsock2 Fix for Windows 98/ME:
http://www.bu.edu/pc...insock2fix.html
Direct download [60 KB]:
http://www.bu.edu/pc...ccess/w2fix.exe
- LSP-Fix for Windows 9x/NT4/2000/ME/XP/2003:
http://www.cexx.org/lspfix.htm
Direct download [179 KB]:
http://www.cexx.org/lspfix.zip

Unfortunately I can't test your environment because I don't have a DSL modem.

Hope this helps.

[PsycoUnc]

-reguerra: let us know if and how that ADSL/network prob gets resolved, I have a friend who could REALLY benefit from 98se2me...
>;]

[MDGx]

PsycoUnc, on May 30 2005, 09:55 AM, said:

I have a friend who could REALLY benefit from 98se2me...

You don't need to wait for reguerra to do this.
You [or your friend] can always install 98SE2ME on your friend's computer, because it backs up the entire OS into C:\W98SEOLD , where the original OS can be always restored from, just in case.
Just allow 98SE2ME to create a new backup when u run option 1 or option 2 [those are the only options that need full backup].

Hope this helps.

[PsycoUnc]

MDGx, on May 31 2005, 11:22 AM, said:

PsycoUnc, on May 30 2005, 09:55 AM, said:

I have a friend who could REALLY benefit from 98se2me...

You don't need to wait for reguerra to do this.
You [or your friend] can always install 98SE2ME on your friend's computer, because it backs up the entire OS into C:\W98SEOLD , where the original OS can be always restored from, just in case.
Just allow 98SE2ME to create a new backup when u run option 1 or option 2 [those are the only options that need full backup].

Hope this helps.
<{POST_SNAPBACK}>

-true; I just thought, if Reguerra is already working this out, why duplicate the effort? Just wait and see what he comes up with, take it from there... But if he takes too long, I will give it a shot, too...

[MDGx]

PsycoUnc, on May 31 2005, 09:45 AM, said:

-true; I just thought, if Reguerra is already working this out, why duplicate the effort?  Just wait and see what he comes up with, take it from there... But if he takes too long, I will give it a shot, too...

roger that

[PsycoUnc]

-uh oh, looks like broken link for 98se2me download, MDGx.....

-I'll try it on another puter, to make sure, but both browsers here failed...