[Jorex]

Thank to all! I already solved the problem with Nitro PDF I used CMenu.

Would like to know more commands to use in CMenu.
example: sleep = timer
where do I find other?

[Jorex]

MHz, on Aug 19 2006, 05:09 AM, said:

Jorex, on Aug 19 2006, 07:14 AM, said:

I want the script to close the program and also close the page of the site that opens in the end.

If you have a script made and need some help, then I'm sure that I or someone else maybe able to help you with the problems in your script. There are some samples above of using scripts made with CMenu templates.
I'm sure that ProcessClose() can perhaps handle your issues.

Ok, my friend,
see if you can me to help with this shell of IrfanView ShellExtension 125kb.

See more in this site, the program is small
http://www.sharewareconnection.com/irfanvi...llextension.htm

I tried in several ways and I didn't get.
Thank you for your help.

[MHz]

Jorex, on Aug 30 2006, 05:42 AM, said:

Would like to know more commands to use in CMenu.
example: sleep = timer
where do I find other?

Have you looked in the helpfile? I'm sure I have added enough information within it to help the user.

Jorex, on Aug 31 2006, 07:20 AM, said:

Ok, my friend,
see if you can me to help with this shell of IrfanView ShellExtension 125kb.

See more in this site, the program is small
http://www.sharewareconnection.com/irfanvi...llextension.htm

I tried in several ways and I didn't get.
Thank you for your help.

I have looked into the installer and it is deceptive to get the correct ContolID's for the buttons, but I did get them. If it came to being too differcult to find for you, then the controls text could be used as the ControlID.
This is the script code I finished with.
 _irfanex_v102.html (31.12K)
Number of downloads: 29

[Jorex]

You got...
Thank you very much! You are very good.

This post has been edited by Jorex: 31 August 2006 - 04:45 PM

[Jorex]

Hello friend,
A problem happened in the installation CMenu that you did for me.
I copied the whole text and I glued in a Script, later I ordered to begin and appeared this mistake.



What should I make?

[MHz]

Please download the latest AutoIt3 installer released. AutoIt version 3.2.0.1 is the latest that will support the syntax used. I'm sure that error will not happen when 3.2.0.1 is used as the previous version of AutoIt3 did not support the keyword Default.

http://www.autoitscript.com/autoit3/

[Jorex]

Thank you very much!
This new AutoIt solved my problem.

[PopRocks]

Hi. Great program, I am using it to find switchs that ussf can't tell me. Sometime how ever it asks me to indentify the installer. As I am noob in this area, I was hopeing some one could give me some advice. I have googled how to indentify them but as yet I have not come up with any ideas. any help would be greatly appreciated. Thanx

[MHz]

maxXPsoft, on Aug 24 2006, 12:59 AM, said:

Wishlist:
Update your install to use Innosetup so will install over the top of existing.

Decided not to do it with CMenu, but I have used Inno Setup with the new SendToA3X. I have added most the features from CMenu over to SendToA3X so it uses the inbuilt SendTo extension that Windows uses instead of the 3rd party shell extension. I guess your wish basically come true on using Inno Setup for the move to using SendToA3X.

You can get v1.0 from http://uawiki.org/CMenu/



Edit:
Separate Topic for SendToA3X below for further discussion on it.
http://www.msfn.org/...showtopic=83388

This post has been edited by MHz: 26 September 2006 - 08:41 AM

[faresalandlos]

thanks>>>>>> i will try it

[atomizer]

the "directory list" function appears to be missing in 2.6. is this a an executable that can be downloaded elsewhere?

[MHz]

The "Directory List" function is in v2.6 as just verified with a clean install. You could perhaps try to uninstall and install again which may refresh the entry if it is missing. You can download CMenu from here.

[atomizer]

i d/l'd that earlier today and there was no directory list functionality, force delete, and others were missing. i d/l'd it again and the contents of the archive were the same. uninstalled/reinstalled and all the functionality is restored. this is on a fresh xp install.

the MD5/CRC signatures never match those posted however.
this is mine: BB13F647E786CF6743A7F36DB4C060C5

[MHz]

atomizer, on Nov 15 2006, 04:36 AM, said:

i d/l'd that earlier today and there was no directory list functionality, force delete, and others were missing. i d/l'd it again and the contents of the archive were the same. uninstalled/reinstalled and all the functionality is restored. this is on a fresh xp install.

I am glad that restoration was successful. Very strange how it failed to add the entries the 1st time but it might be a one off event of some disturbance that caused failure. Not much I can do about unexpected events such as this.

atomizer, on Nov 15 2006, 04:36 AM, said:

the MD5/CRC signatures never match those posted however.
this is mine: BB13F647E786CF6743A7F36DB4C060C5

Thanks for the hash as I like to be informed of any tempering that may have happened on the CMenu site.
I just downloaded CMenu v2.6 and the hash is correct as listed. Do note that I hash CMenu.exe and not the zip archive that stores it. The hash you present is the zip archive.

from CMenu Homepage said:

Current version of CMenu.exe Hashes:

[atomizer]

heh, i didn't think of that. the hashes match

sorry for the trouble.

[ajua]

any insights of cmenu on windows vista? i just tried to install it and i got an error message windows that tells me that it "cannot copy file" to C:\Program Files.....

also, is there another tool that lets me at least run exe and msi files with parameters in vista?

EDIT: i just made execute with parameters dll that works in vista. i will post it on the members projects forum.
if someone can fix the cmenu to work on vista would be great as i want mora than just run with parameters.

thanks.

This post has been edited by elajua: 29 January 2007 - 01:31 AM

[MHz]

vista is wow for problems so be patient please.

[ajua]

my own dll was giving me problems. but the CMenu setup can be run as administrator and it install fine. i just found that some minutes ago.
just run it as admin and everything is working, at least the identify installer and run with parameters wich i have tested. to run msi files with parameters you dont need to change the as admin but it is needed in order to run exe files.

[jbs123]

Great tool! This is accomplishing most everything I need.

I was wondering though. I may have over looked but can I identify the installer from the windows command line and possibly pass those variables to do a silent install. What I am trying to do is poll a folder with all kinds of applications I have downloaded and automatically install them.

Thanks

[MHz]

jbs123, on Jul 3 2007, 12:02 AM, said:

Great tool! This is accomplishing most everything I need.

I was wondering though. I may have over looked but can I identify the installer from the windows command line and possibly pass those variables to do a silent install. What I am trying to do is poll a folder with all kinds of applications I have downloaded and automatically install them.

Thanks

You can call CMenu.exe via command line, but you would only invoke the Gui "Identify Installer". I could create a modification to a special executable to allow this, to pass a command line and to execute the path of the file with suitable switches, but you may miss out on the files that cannot be recognized though.

Let me know if you want to continue with this and I may see if I can create a prototype for you to try out.