Hey i need some help i get following problem;
The OS installation fails at last reboot with a short BSOD and endless reboots.
Reason: You either didn't choose the correct driver integration method or your optical drive is connected to a S-ATA port, which is set to RAID or AHCI.
Solution:Connect the optical drive to a non-RAID/non-AHCI S-ATA port or take an IDE connected CD/DVDROM drive for the OS installation.
The motherboard i have is: GA-EP45-DS3R
I have tried to add the officiel sata files from gigabyte's homepage. But when I add the driver i have to pick between 10 .inf(s):
iaAHCI_ESB2 = "Intel® ESB2 SATA AHCI Controller"
iaAHCI_ICH7RDH = "Intel® ICH7R/DH SATA AHCI Controller"
iaAHCI_ICH7MMDH = "Intel® ICH7M/MDH SATA AHCI Controller"
iaAHCI_ICH8RDHDO = "Intel® ICH8R/DH/DO SATA AHCI Controller"
iaAHCI_ICH8MEM = "Intel® ICH8M-E/M SATA AHCI Controller"
iaAHCI_ICH9RDODH = "Intel® ICH9R/DO/DH SATA AHCI Controller"
iaAHCI_ICH9MEM = "Intel® ICH9M-E/M SATA AHCI Controller"
iaAHCI_ICH10DDO = "Intel® ICH10D/DO SATA AHCI Controller"
iaAHCI_ICH10R = "Intel® ICH10R SATA AHCI Controller"
iaStor_ESB2 = "Intel® ESB2 SATA RAID Controller"
iaStor_ICH7RDH = "Intel® ICH7R/DH SATA RAID Controller"
iaStor_ICH7MDH = "Intel® ICH7MDH SATA RAID Controller"
iaStor_ICH8RICH9RICH10RDO = "Intel® ICH8R/ICH9R/ICH10R/DO SATA RAID Controller"
iaStor_ICH8MEICH9ME = "Intel® ICH8M-E/ICH9M-E SATA RAID Controller"
These are the drivers i can pick.
In bios Sata raid/acci mode has been disabled.
Hope someone can help me
This post has been edited by dawies: 09 March 2009 - 05:06 PM