Since you obviously have an Intel and no NVIDIA nForce chipset mainboard, you are posting into the wrong thread and maybe even following the wrong guide. Please join my special Intel driver integration guide and write your future posts into this special Intel driver thread.
Suggestion: Integrate only the 32bit Intel textmode driver I have linked within my Intel driver integration guide. Since your board has an Intel ICH10R chipset, you should just enable the "Intel® ICH10R SATA AHCI Controller", if you have AHCI Mode enabled, or the "Intel® ICH8R/ICH9R/ICH10R/DO SATA RAID Controller", if you are running your SATA hdd in RAID Mode. If you don't know, if your SATA hdd is running in RAID or AHCI mode, you can enable both mentioned Controllers.
Do not integrate any other drivers.
By the way: If you have integrated the needed textmode driver, you should never hit F6.
1. If you ave more than 3 GB of RAM within your computer, you should remove 1-2 sticks. After having completed the XP insallation you can reinsert them.
2. If the CD/DVD device, where you are booting off, should be connected with an Intel SATA Controller, you should try either to borrow an IDE connected one (just for the XP installation) or connect it to another (non-Intel) SATA Controller.