Jump to content

98 SE SP 2.0.2


Gape

Recommended Posts

Why is the older Q254660 msmouse.vxd being used in 2.0.2 ? Version 4.10.2223

thx...

Older? :huh:

Well, I only say 'older' since the one I have on my 98SE box is dated 6/18/02 and is a version 11.40.852

The poster I was asking about it on another forum told me the one from 2.0.2 is MSMOUSE.VXD 6/14/1999 version 4.10.2223

Link to comment
Share on other sites


Why is the older Q254660 msmouse.vxd being used in 2.0.2 ? Version 4.10.2223

thx...

Older? :huh:
Well, I only say 'older' since the one I have on my 98SE box is dated 6/18/02 and is a version 11.40.852

The poster I was asking about it on another forum told me the one from 2.0.2 is MSMOUSE.VXD 6/14/1999 version 4.10.2223

MSMOUSE.VXD 11.40.852 and all other 11.xx.xxx and 10.xx.xxx builds are officially installed only by MS IntelliPoint software, and do not work if IntelliPoint software not also installed.

Last build officially installed by MS patches/updates/hotfixes is 4.10.2223, and that's the 1 u should have if u r running 98SE without MS IntelliPoint software.

IP last version for 98SE is 4.12:

Microsoft IntelliPoint Mouse Drivers, Tools + Wheel for Windows 9x/NT4/2000/ME/XP/2003 + MS-DOS 6/7/8:

http://www.microsoft.com/hardware/mouseand...d/download.mspx

IntelliPoint v4.12 for Windows 98/98SE/NT4/ME [9.68 MB, English]:

http://download.microsoft.com/download/4/8...12EngALLMsi.exe

Hope this helps.

Link to comment
Share on other sites

I have attempted to upgrade to Windows ME and realized I lost my product key.  I aborted the installation but my version has been changed to that of Windows ME.

What can I do to correct this besides a format and re-install?

Thanks in advance.

95/98/ME product key can be recovered from the registry:

http://www.mdgx.com/newtip21.htm#PRKE

even on aborted installations.

Hope this helps.

Link to comment
Share on other sites

Does any1 know the link for HTML32.CNV 2003.1100.6252 ?

Thanks in advance.

no official one yet...

but take the file attached.

Many thanks for all the links, guys.

You ARE very helpful people. :thumbup

Link to comment
Share on other sites

Last build officially installed by MS patches/updates/hotfixes is 4.10.2223, and that's the 1 u should have if u r running 98SE without MS IntelliPoint software.

Is the 4.10.2223 supposed to be in that hotfix Q254660 ?

I dl'ed it from the link for Q254660 on the first post in this topic and it's 4.10.2222 (I extracted the exe with 7zip and checked the version).

So where is 4.10.2223 ?

Link to comment
Share on other sites

There is also reference to another hotfix with an msmouse.vxd 4.10.2225 but I can't find that!

Q318307

It contains just Vmouse.vxd 4.10.2225. It is part of Intellimouse 4.12.

Petr

Link to comment
Share on other sites

Is the 4.10.2223 supposed to be in that hotfix Q254660 ?

I dl'ed it from the link for Q254660 on the first post in this topic and it's 4.10.2222 (I extracted the exe with 7zip and checked the version).

So where is 4.10.2223 ?

Q254660 contains MSMOUSE.VXD, VMOUSE.VXD and MOUHID.VXD, all files version 4.10.2223. Maybe you were confused by Product Version 4.10.2222?

Petr

Link to comment
Share on other sites

Hope this helps.

thanks, yes it does....There is also reference to another hotfix with an msmouse.vxd 4.10.2225 but I can't find that!

Q318307

Gape, Petr, erpdude8, myself and others here at MSFN forums are aware of this.

When [if] it becomes available [and if tested to make sure it is safe for all environments], Gape will probably include it in the next 98SE SP release, and I will add it to my 98SE patches page:

http://www.mdgx.com/web.htm#98SE

and I will also post it here:

http://www.msfn.org/board/?showtopic=46581

VMOUSE.VXD 4.10.2225 is installed by Gape's 98SE SP 2.0.2 and IP 4.12.

Q254660 is available here:

http://www.mdgx.com/files/Q254660.EXE

and contains these 3 files:

MOUHID.VXD 4.10.2223

MSMOUSE.VXD 4.10.2223

VMOUSE.VXD 4.10.2223

More details:

http://support.microsoft.com/?id=254660

Hope this helps.

Edited by MDGx
Link to comment
Share on other sites

Q254660 contains MSMOUSE.VXD, VMOUSE.VXD and MOUHID.VXD, all files version 4.10.2223. Maybe you were confused by Product Version 4.10.2222?

Petr

thank you, I did notice at home it showed 4.10.2223 and maybe I did look at product version :blushing: I will verify the same in the office, where I first did the update.

Link to comment
Share on other sites

I just installed 2.0.2 and I must say that I don't like the new boot logos.

The first problem is that they're based on the XP "rolling hills" desktop, which I really don't care for, then it looks like crap dithered down to 256 colors or whatever.

I much prefer the simpler original ones with "second edition" added to the bottom.

Link to comment
Share on other sites

I just installed 2.0.2 and I must say that I don't like the new boot logos.

The first problem is that they're based on the XP "rolling hills" desktop, which I really don't care for, then it looks like crap dithered down to 256 colors or whatever.

I much prefer the simpler original ones with "second edition" added to the bottom.

They're optional. Also, you can easily delete them. (Just delete: C:\LOGO.SYS and C:\WINDOWS\LOGOW.SYS).

Link to comment
Share on other sites

I just installed 2.0.2 and I must say that I don't like the new boot logos.

The first problem is that they're based on the XP "rolling hills" desktop, which I really don't care for, then it looks like crap dithered down to 256 colors or whatever.

I much prefer the simpler original ones with "second edition" added to the bottom.

They're optional. Also, you can easily delete them. (Just delete: C:\LOGO.SYS and C:\WINDOWS\LOGOW.SYS).

What I mean is that I like your other boot logos instead. The ones that your service pack included before these ones.

Link to comment
Share on other sites

Hello.

I have installed sesp202en patch on my Athlon AMD +2500 machine with

Pinnacle PCTV Tuner card. I have faced the following problem and could

find the reason at last. IE6 is installed on my system.

Whenever I start the Pinnacl PCTV, the following error is popping up

"Vision caused and Invalid page fault at module unknown" . I have reinstalled the software several times and also used the drivers update. I get the

"Vision caused and Invalid page fault in pfc.dll" when recording is started.

The Gallery window has also not opened. After uninstalling the sesp202 patch

the software is working normally. Now I installed sp20rc1 patch and the software

is working normally. Please let me know the reason for this bug and fix for it.

thank u,

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...