[Csimbi]

1. LClock, available here.
2. MS Application compatibilty toolkit 4.0.1, available on MS web site in the download section, "Microsoft Application Compatibility Toolkit.msi".
3. MDAC 2.81, available on MS web site in the download section, "MDAC_TYP.EXE".
4. Universal BricoPacks (Longhorn Inspirat BricoPack in particular), available here.
Thank You!

[oioldman]

1; the LClock switch is mentioned on the site and i'm pretty sure it is /S (case sensitive)
2; use /quiet or /passive (standard msi switches)
3; mentioned elsewhere i believe
4; do you know what type of installer it is? look here for advice of recognition and stuff, http://unattended.msfn.org/ click intermediate

[Csimbi]

oioldman, on Aug 12 2005, 04:25 PM, said:

1; the LClock switch is mentioned on the site and i'm pretty sure it is /S (case sensitive)
2; use /quiet or /passive (standard msi switches)
3; mentioned elsewhere i believe
4; do you know what type of installer it is?  look here for advice of recognition and stuff, http://unattended.msfn.org/ click intermediate
<{POST_SNAPBACK}>

1. Ok, found it.
2. /quiet and /passive and /qn says invalid switches. Here is the help it gives with the /? parameter:

Windows ® Installer. V 3.01.4000.1823 

msiexec /Option <Required Parameter> [Optional Parameter]

Install Options
	</package | /i> <Product.msi>
  Installs or configures a product
	/a <Product.msi>
  Administrative install - Installs a product on the network
	/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
  Advertises a product - m to all users, u to current user
	</uninstall | /x> <Product.msi | ProductCode>
  Uninstalls the product
Display Options
	/quiet
  Quiet mode, no user interaction
	/passive
  Unattended mode - progress bar only
	/q[n|b|r|f]
  Sets user interface level
  n - No UI
  b - Basic UI
  r - Reduced UI
  f - Full UI (default)
	/help
  Help information
Restart Options
	/norestart
  Do not restart after the installation is complete
	/promptrestart
  Prompts the user for restart if necessary
	/forcerestart
  Always restart the computer after installation
Logging Options
	/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
  i - Status messages
  w - Nonfatal warnings
  e - All error messages
  a - Start up of actions
  r - Action-specific records
  u - User requests
  c - Initial UI parameters
  m - Out-of-memory or fatal exit information
  o - Out-of-disk-space messages
  p - Terminal properties
  v - Verbose output
  x - Extra debugging information
  + - Append to existing log file
  ! - Flush each line to the log
  * - Log all information, except for v and x options
	/log <LogFile>
  Equivalent of /l* <LogFile>
Update Options
	/update <Update1.msp>[;Update2.msp]
  Applies update(s)
	/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
  Remove update(s) for a product
Repair Options
	/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
  Repairs a product
  p - only if file is missing
  o - if file is missing or an older version is installed (default)
  e - if file is missing or an equal or older version is installed
  d - if file is missing or a different version is installed
  c - if file is missing or checksum does not match the calculated value
  a - forces all files to be reinstalled
  u - all required user-specific registry entries (default)
  m - all required computer-specific registry entries (default)
  s - all existing shortcuts (default)
  v - runs from source and recaches local package
Setting Public Properties
	[PROPERTY=PropertyValue]

Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.

Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.

None of these switches actually work though.
3. Tried searching, did not find it. Any hints where to look? Thanks.
4. Seems to be exactly the same as 2.

[oioldman]

2; the toolkit i just ran /passive with no issues => check you have .net framework installed and you've quotes around the file name as it has spaces in it

3; for mdac, do a search and you should get some results. i just did and seems you install via svcpack.inf file

4; for the xpshell thing use /S, case sensitive, (just guessed and it worked)

[Csimbi]

oioldman, on Aug 14 2005, 10:41 PM, said:

2; the toolkit i just ran /passive with no issues => check you have .net framework installed and you've quotes around the file name as it has spaces in it

3; for mdac, do a search and you should get some results.  i just did and seems you install via svcpack.inf file

4; for the xpshell thing use /S, case sensitive, (just guessed and it worked)
<{POST_SNAPBACK}>

2. Got it, trouble was with the spaces in the file name and the quotes in the bat file. Removed spaces from filename and quotes as well - it works now, thanks.
3. Found it, thanks.
4. Thanks!