[carrot]

With regard to the 12NOV2005\SVC-HF1 folder I have the following differences:

files I have not on this location:

Q282784_WXP_SP1_x86_ENU.exe
Microsoft has released a command-line tool that easily enumerates all of the installed fixes by Microsoft Knowledge Base article number. Customers can then confirm that they have installed the appropriate set of fixes before using a valuable support incident and potentially experiencing unplanned down time.

WindowsXP-KB883939-x86-JPN.exe
Security issues have been identified that could allow an attacker to compromise a computer running Internet Explorer and gain control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.

WindowsXP-KB885222-v2-x86-JPN.exe
After you install Windows XP Service Pack 2, some 1394 devices (such as digital cameras that use S400 speed) may not perform as expected. Install this update to help prevent this issue. After you install this update, you will have to restart your computer.

WindowsXP-KB885626-v2-x86-jpn.exe
This non-security critical update helps resolve an issue where a limited number of systems running a BIOS without production support for Intel Pentium 4 and Intel Celeron D processors based on Prescott C-0 stepping can potentially hang on Windows XP Service Pack 2 installation. After you install this update, you may have to restart your computer

WindowsXP-KB886677-x86-jpn.exe
This update addresses an issue where double-byte character set (DBCS) characters may appear corrupted in Internet Explorer on Windows XP when you browse a Web site that uses Shift-JIS character encoding. Install this update to help resolve this issue. After you install this item, you may have to restart your computer.


files I have and are not in the presentend list:
WindowsXP-KB899588-x86-ENU.exe
A security issue has been identified in the Plug and Play service that could allow an attacker to compromise your Microsoft Windows-based system and gain control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.


So in total here are 41 I have 37 hf.

After installation only the following optional software is represented to me by windows update:
829019 dotnet 2
891122 WDRM enabled mediaplayers

so perhaps there are some hf not necesarry for my system or there are some updates which are included in newer ones in the list of 41

[Tinywoods]

Hello Carrot

Thank you for your feedback. I'm pleased to hear your ideas for Hotfix.
I'm tring to install the latest Hotfixes without any problem. After that I'll try your Hotfix list.

Thanks!

[jobbie]

Tinywoods, on Nov 10 2005, 10:08 AM, said:

@p388l3s Thank you.
I found there is no Microsoft .NET Framework Version 2.0 Redistributable Package (x86) Japanese version today. So I could not reach the site.

You ca download English version from here.
http://www.microsoft.com/downloads/details...&DisplayLang=en

I did installed tis version today into the dutch version and there no problems whit it.
The installer is in my own language maybe it reads from the older version the language.
After the install i used windows update and it was installed corect.

Tinywoods can you tell me where i have to place it in xpcreate.
Do i need to remove older versions?

Thx

[ironside]

.NET Framework 2.0 cannot be installed at T13 it's a known issue.

[JASpurrier3]

First off, stop saying that .NET Framework cannot be installed at T-13. There is a way. There is always a way. We just don't know how to do it.

Also, if you would like to negate both of the hotfixes (KB891122 and KB902344), you have to update the Windows Media Format 9.5 Runtime. To get the version that fixes both updates, you need to download KB900325. It was a huge rollout for Media Center and it contained a file called wmfdist95.exe. Wmfdist95.exe updates Media Player and no longer requires you to download KB891122 or KB902344 (even on the Windows Update website). Extract all the contents of KB900325 and remove the file wmfdist95.exe. To get it to install silently, you have to repackage it using iexpress and use the command:

"wmsetsdk.exe" /DisallowSystemRestore /WMFDIST /Quiet /R:N"

Download KB900325: Here

-JASpurrier3

[P1R4T3]

Wat about the "Current Hotfixes" section on xpcreate's page? It still has the August list. Since this list is not up-to-date, Ive been thinking about something, create an iso using xpcreate and its august hotfixes, and integrate ryanvm's update pack in that iso using nlite. Coz in ryanvm u get the flash player, and other extras?
Have anyone tried it?
Will this work?

[ironside]

Probably not or a pretty pointless exercise as Ryan;s pack contains all the updates prior to august anyway.

Best method is to go to the unattended windows forum and look in the HOTFIXES thread and download all the updates since august to your SVC-HF1 folder, Easy!

Oh, and by the way .NET Framework 2.0 does not install at T-13 period!

This post has been edited by ironside: 24 November 2005 - 11:10 AM

[P1R4T3]

ironside, on Nov 24 2005, 11:08 AM, said:

Probably not or a pretty pointless exercise as Ryan;s pack contains all the updates prior to august anyway.

Best method is to go to the unattended windows forum and look in the HOTFIXES thread and download all the updates since august to your SVC-HF1 folder, Easy!

Oh, and by the way .NET Framework 2.0 does not install at T-13 period!

Thanks for the reply though the question seemed like it came from a n00b(me ). Thanks for the reply and for not shooting at me.

[ironside]

you're welcome

[Tinywoods]

Hello

Finally, I gave up to add the 2 files in XPCREATE. The runonceex batch method is the best way for me at this moment as Bitfrotter said.


@carrot, sorry my late response.

*Q282784_WXP_SP1_x86_ENU.exe --- It is nice to have for me, Qfecheck tool. No impact on Windows update. But you can see whether Hotfixs have been install completly or not.

*WindowsXP-KB883939-x86-JPN.exe --- Security patch for IE. It may be an old file, as you said.

*WindowsXP-KB885222-v2-x86-JPN.exe --- IEEE1394 patch (SP2) It's depend on your PC. You can delete it. I use XPCREATE + WPI in DVD (8.5G DL DVD) for my 4 PCs, so I use the file for safe.

*WindowsXP-KB885626-v2-x86-jpn.exe --- CPU support patch. It's depend on your PC. You can delete it. (It is a patch for Prescotte and Celeron D)

*WindowsXP-KB886677-x86-jpn.exe --- For Two byte OS only.

*WindowsXP-KB899588-x86-JPN.exe --- Security patch for SP2 Plug and play weakness. Yes, we should better to add it. But I've never been asked to install when I perform Windows update.

[Tinywoods]

* 4168KB : WindowsXP-KB883939-x86-JPN.exe (Deleted on Nov.28 It maybe old file)

[ironside]

2 new pptional software updates released

Microsoft Base Smart Card Cryptographic Service Provider Package: x86 (KB909520)
Download size: 626 KB , less than 1 minute
Base Smart Card Cryptographic Service Provider (Base CSP) allows smart card vendors to more easily enable their smart cards on Windows with a lightweight proprietary card module instead of a full proprietary CSP. After you install this item, you may have to restart your computer. Details...

Windows Media Connect 2.0 (KB909993)
Download size: 6.4 MB , less than 1 minute
Installing Windows Media Connect enables you to deliver music, photos, and videos from your computer to devices that support UPnP media streaming. This includes digital audio receivers, connected DVD players, digital cable set-top boxes, gaming consoles and more. After you install this item, you may have to restart your computer. Details...

both of these go in SVC-HF1

windows media connect 1.0 can be deleted from the SVC-WMC folder as it's no longer required.

[jobbie]

Thx Ironside

But can you tell me where to find update file kb909993.
I did'nt find it on microsoft

Thx anyway

[ironside]

Widows media connect 2.0 (kb909993)

http://www.microsoft.com/downloads/details.aspx?FamilyID=e93a0ba1-1206-4df5-a3e7-f076691261ef&DisplayLang=en

[jobbie]

Thx for the answer.
I have dowload all the updates of windows xp today.
my hdd fail and i lost everything.
I can't find the windows journal viewer setup.
I miss the follow kb896344 do i need this file and somebody know where the dutch version of it is for download.
Search on the microsoft download center did'nt work.

Thx

[ironside]

Removed

This post has been edited by ironside: 06 December 2005 - 06:05 PM

[jobbie]

I have installed a clean version of windows.
The update where i ask for is'nt too install whit windows update too.
Maybe we don't need it to integrate in xpcreate.

[JoeMSFN]

Tinywoods, on Aug 12 2005, 02:16 PM, said:

All,
When I see XPCREATE threads, it seems XPCREATE users are decreasing. Fewer threads are there compare to last year. Because it was ...

Could also be that (barring a few weirdo updates from MS) XPCREATE just works and the online documentation and previous forum posts and replies are quite sufficient to help any XPCREATEr so there isn't a need to post...

This post has been edited by JoeMSFN: 07 December 2005 - 06:55 AM

[sirsycho]

ok I I've tried numerous things and finally resorted to using the exact list of fixes in this thread with the same results...

I run xpcreate from the command line from the directory it's installed in and get the following errors almost immediately... anyone have any suggestions?

C:\Temp\XPCREATE>xpcreate
-- 17:49:25 --> Looking for CD Source.
-- 17:49:25 --> Found local Boot Image: BOOT\XPCTBOOT.BIN
-- 17:49:25 --> Setting up Run-Time Variables.
-- 17:49:25 --> Listing Hotfixes and Updates.
-- 17:49:26 --> Removing Previous Creation Directories.
-- 17:49:26 --> Removing TEMP Files.
-- 17:49:26 --> Creating TEMP directories.
-- 17:49:26 --> Determine Source Version.
-- 17:49:26 --> Found Source Version: XPP
-- 17:49:26 --> Found Minor Version: 1
-- 17:49:26 --> Found Service Pack Version: 2
-- 17:49:26 --> Found Language Version: ENU
-- 17:49:26 --> Found Localization Version: English
-- 17:49:26 --> Hotfix Directory used: SP2QFE
-- 17:49:26 --> Start copying files.
File Not Found
File Not Found
-- 17:49:28 --> Copying Hotfixes: Type 1
-- 17:49:28 --> Extracting for sort order.
TEMP\CATEXT\_sfx_0006._p - The process cannot access the file because it is bein
g used by another process.
The directory is not empty.
TEMP\CATEXT\sp1qfe\ntkrnlpa.exe - The process cannot access the file because it
is being used by another process.
TEMP\CATEXT\sp1qfe\ntkrnlpa.exe - The process cannot access the file because it
is being used by another process.
TEMP\CATEXT\sp2qfe - The system cannot find the file specified.
TEMP\CATEXT\_sfx_.dll - Access is denied.
The process cannot access the file because it is being used by another process.
TEMP\CATEXT\sp1qfe - The directory is not empty.
TEMP\CATEXT\_sfx_0009._p - The process cannot access the file because it is bein
g used by another process.
The process cannot access the file because it is being used by another process.
TEMP\CATEXT\empty.cat - The process cannot access the file because it is being u
sed by another process.
TEMP\CATEXT\sp2qfe\msoe.dll - The process cannot access the file because it is b
eing used by another process.
TEMP\CATEXT\sp2qfe\ntkrnlpa.exe - The process cannot access the file because it
is being used by another process.
TEMP\CATEXT\_sfx_.dll - Access is denied.
TEMP\CATEXT\_sfx_0005._p - The process cannot access the file because it is bein
g used by another process.
TEMP\CATEXT\_sfx_0006._p - The process cannot access the file because it is bein
g used by another process.
TEMP\CATEXT\_sfx_0008._p - The process cannot access the file because it is bein
g used by another process.
TEMP\CATEXT\_sfx_0010._p - The process cannot access the file because it is bein
g used by another process.
TEMP\CATEXT\msi.dll - The process cannot access the file because it is being use

Thanks in advance... I'll post the log shortly.

*************************************
20 minutes later
*************************************

Nevermind... figured it out with the STARTSWITCH=/WAIT /MIN

This post has been edited by sirsycho: 08 December 2005 - 07:27 PM

[ironside]

Latest December update's

High-priority updates
Microsoft Windows XP

SVC-HF1
Update for Windows XP (KB910437)
Download size: 1.1 MB , less than 1 minute
Install this update to prevent or resolve an issue in which Windows Update and Automatic Updates can no longer download updates after an Access Violation error occurs when using the Automatic Updates service. After you install this item, you may have to restart your computer. Details...

Cumulative Security Update for Internet Explorer for Windows XP (KB905915)
Typical download size: 1.4 MB , 1 minute
Security issues have been identified that could allow an attacker to compromise a computer running Microsoft Internet Explorer and gain control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. Details...

(replaces: WindowsXP-KB896688-x86-ENU.exe)

SVC-MRT
Windows Malicious Software Removal Tool - December 2005 (KB890830)
Download size: 1.3 MB , less than 1 minute
After the download, this tool runs once to check your computer for infection by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps to remove any infection found. If an infection is found, the tool will display a status report the next time you start your computer. A new version of the tool will be offered every month. If you want to manually run the tool on your computer, you can download a copy from the Microsoft Download Center or run an online version from microsoft.com. This tool is not a replacement for an anti-virus product. To help protect your computer, you should use an anti-virus product. Details...

(rep;aces: Windows-KB890830-V1.10-ENU.exe)