I had a problem that said \windows\system32\config\system ...was corrupt - is it possible to run the restore (rstrui.exe) from the DOS prompt or does anyone know how I can get to the COMMAND line ...thanks in advance
Page 1 of 1
Restore from DOS - rstrui.exe Restore probelm
#2
Posted 04 September 2005 - 12:09 PM
System restore cannot be run from the command line.. (the program can be started from there but not actually ran from there with switches)
http://support.microsoft.com/default.aspx?...;304449&sd=tech
if you are using XP.. here is the MS Knowledgebase article
http://support.microsoft.com/default.aspx?...B;EN-US;Q307545
Otherwise, run a repair installation.. this should fix your problem
http://support.microsoft.com/default.aspx?...;304449&sd=tech
if you are using XP.. here is the MS Knowledgebase article
http://support.microsoft.com/default.aspx?...B;EN-US;Q307545
Otherwise, run a repair installation.. this should fix your problem
#3
Posted 06 September 2005 - 05:26 AM
you should use RECOVERY CONSOLE to repair your system
#4
Posted 10 September 2005 - 09:12 PM
This usually happens when xp crashes do to overclocking, etc. I've fixed many pc with this exact same problem by using the recovery console and running chkdsk c: /p /r or using hiren's boot cd 7.0 and running chkdsk c: /f /r
Share this topic:
Page 1 of 1



Help
Back to top









