Frontpage
Forums
Tutorials
Members
Calendar
Subscription
Donate
Links
Contact 
Help
I got at logitech quickcam express
and everytime i insert it into my usb plug
i get a little messagea at my taskbar that says
USB device not recognized
even though it was working before
anyone ideas?
Page 1 of 1
logitech quickcam
Rate Topic:
Back to top
#2
- Casual Poster
-
- Group: Members
- Posts: 3,473
- Joined: 24-June 04
- OS:Windows 7 x64
-
Country:
Posted 16 October 2005 - 05:50 PM
Logitech QuickCam Express (Earlier Version)
Download the software+drivers package if you have the earlier design.
Logitech QuickCam Express (Newer Version)
Newer one.
Extract the contents to a folder with 7Zip or WinRAR. Browse to "qc848enu\Drivers\WinAll\XPRS" and there are your driver files. Uninstall the quickcam, scan for new hardware, then when you manually browse to the drivers, go to that folder, click OK. Done. Enjoy. Make a backup for future use.
Download the software+drivers package if you have the earlier design.
Logitech QuickCam Express (Newer Version)
Newer one.
Extract the contents to a folder with 7Zip or WinRAR. Browse to "qc848enu\Drivers\WinAll\XPRS" and there are your driver files. Uninstall the quickcam, scan for new hardware, then when you manually browse to the drivers, go to that folder, click OK. Done. Enjoy. Make a backup for future use.
#3
Posted 16 October 2005 - 06:21 PM
the problem is under my device manager
my quickcam is coming in as unknown devic
my quickcam is coming in as unknown devic
#4
- Junior
-
- Group: Members
- Posts: 67
- Joined: 14-May 04
- OS:XP Pro x86
-
Country:
Posted 17 October 2005 - 03:07 AM
It would appear that your previous installation has somehow become corrupted. As Jeremy has suggested I'd think a fresh installation would be the right step to take next.
When installing most hardware one should connect the hardware and then install the software. However, with USB devices it is often appropriate to install the software first and then connect the hardware. You may find it necessary to disconnect the camera, then remove the unknown device through Device Manager, then install the drivers, and then reconnect the camera.
When installing most hardware one should connect the hardware and then install the software. However, with USB devices it is often appropriate to install the software first and then connect the hardware. You may find it necessary to disconnect the camera, then remove the unknown device through Device Manager, then install the drivers, and then reconnect the camera.
Share this topic:
Page 1 of 1