Frontpage
Forums
Tutorials
Members
Calendar
Subscription
Donate
Links
Contact 
Help
hi all, i have a problem, my activesync does not want to work. I tried the USB and ifrared, it just does not want to work. I ask it to detect the device(during setup) but its say device not detected. but i can send files from my computer to the device through infrared. can u shine some light on it?
Page 1 of 1
O2 XDA 2 mini active sync problme..
Rate Topic:
Back to top
#2
Posted 19 December 2005 - 04:28 PM
When setting it up im guessing you have it plugged in via the USB. If this is the case the problem could be due to the driver not being installed for you XDA. I had similar problem. Try installing the Driver from the CD that came with the phone.
The reason why the PC can detect the device over Infra–red isbecuse it using diverent protocals ie it only need 2 know that it is a storage device of some sort. Thats why you can send file to the device but not ActiveSynce it via Infra-red. Also Infra-red will not be enabled unless the XDA is deteted on intial setup. Additionally you will have to enable (tick) Activesync on your PC to allow Infra_Red sync.
Also just a check but what version of Activesync are you using, 3.8 or 4.0 or 4.1? I have find that 3.8 is best, 4.0 and 4.1 are more for Windows mobile v5 which is on the new XDA3.
The reason why the PC can detect the device over Infra–red isbecuse it using diverent protocals ie it only need 2 know that it is a storage device of some sort. Thats why you can send file to the device but not ActiveSynce it via Infra-red. Also Infra-red will not be enabled unless the XDA is deteted on intial setup. Additionally you will have to enable (tick) Activesync on your PC to allow Infra_Red sync.
Also just a check but what version of Activesync are you using, 3.8 or 4.0 or 4.1? I have find that 3.8 is best, 4.0 and 4.1 are more for Windows mobile v5 which is on the new XDA3.
#3
- Defender of the Penguin
-
- Group: Members
- Posts: 933
- Joined: 10-April 05
Posted 19 December 2005 - 07:52 PM
Activesync 4.1 is probably the best bet, I've got in running on my RZ1710 fine, no worries at all 
so 4.0 and 4.1 are not specifically for wm5!
Make sure you uninstall everything, drivers and activesync and re-install activesync, and it will ask you to connect your pda, and it should detect automatically, and it will install drivers for you
Failing that, you might have to do a hard reset on your pda, I have done it once before because activesync didn't detect my pda correctly.
so 4.0 and 4.1 are not specifically for wm5!Make sure you uninstall everything, drivers and activesync and re-install activesync, and it will ask you to connect your pda, and it should detect automatically, and it will install drivers for you
Failing that, you might have to do a hard reset on your pda, I have done it once before because activesync didn't detect my pda correctly.
Share this topic:
Page 1 of 1