[gerislamico]

TmEE, on 06 February 2012 - 08:36 AM, said:

I recently lost my 98SE install to a power fluctuation and began experimenting with new stuff and that's some of my experiences, I hope this is of use to someone :
I can say that do not install this SP after you have installed and run AutoPatcher. You will break the system so it will not even boot to safe mode. But installing SP3 and then AutoPatcher works out perfectly. AP will skip any update that SP3 put newer version of so there are no problems in sight, not for me ^^
Only thing that did not work out so well was NUSB35, I got exclamation mark in device manager and updating etc. did not help, but going to NUSB33 fixed it. I need to see if putting NUSB35 separately helps.

http://exuberant.ms11.net/sp162fl.html
It usbser.sys 4.10.2224 to KB308349
In my case, I think failure: usbser.sys 5.1.2600.5512 from SP3 to downgrade 4.10.0.2224 fix it
I'm wrong
The file was failing Usbehci.sys
I clarify for anyone reading my message

This post has been edited by gerislamico: 08 February 2012 - 05:24 PM

[PROBLEMCHYLD]

I will fix the USB problem soon. Thanks

[PROBLEMCHYLD]

Updated

[egrabrych]

TmEE, on 06 February 2012 - 08:36 AM, said:

Only thing that did not work out so well was NUSB35, I got exclamation mark in device manager and updating etc. did not help, but going to NUSB33 fixed it. I need to see if putting NUSB35 separately helps.

Maximus-Decim Native USB Drivers does not contain a Usbser.sys
I think that between version 3.3 and 3.5 NUSB should not this be the difference.

[gerislamico]

egrabrych, on 07 February 2012 - 10:39 AM, said:

TmEE, on 06 February 2012 - 08:36 AM, said:

Only thing that did not work out so well was NUSB35, I got exclamation mark in device manager and updating etc. did not help, but going to NUSB33 fixed it. I need to see if putting NUSB35 separately helps.

Maximus-Decim Native USB Drivers does not contain a Usbser.sys
I think that between version 3.3 and 3.5 NUSB should not this be the difference.

Maximun Decim has nothing to do with usbser.sys
You're right I correct
http://exuberant.ms11.net/sp162fl.html
It usbser.sys 4.10.2224 to KB308349
One could try usbser.sys 5.0.2195.7006 last update http://bristols.zxq....ws2000/updates/ # kb813503 Not as I Do

This post has been edited by gerislamico: 07 February 2012 - 02:21 PM

[PROBLEMCHYLD]

gerislamico, on 07 February 2012 - 12:22 PM, said:

One could try usbser.sys 5.0.2195.7006

Module has no missing import links after running wdmcheck. It may be safe to use this version. I will test it.
If all goes well it will be in the next update.

[tomasz86]

Usbser.sys 5.0.2195.7006 comes from KB838417 which itself is buggy.

[PROBLEMCHYLD]

tomasz86, on 07 February 2012 - 04:28 PM, said:

Usbser.sys 5.0.2195.7006 comes from KB838417 which itself is buggy.

I'll test both versions USBSER.SYS 5.0.2195.6655 + 5.0.2195.7006.
The one that works best will be suitable for SP3. Thanks

[gerislamico]

@PROBLEMCHYLD As with usbser.sys I'm wrong, I started researching failed the USB Drive detection and found the solution

Particulary Solution to no detect USB Drive
Remplaced Usbehci.sys 5.1.2600.1515 -> Usbehci.sys 5.0.2195.6882 NUSB3.5

Video Explanation the Bug and Solution
http://www.mediafire...ae2dj8wmgcbtyyb

[PROBLEMCHYLD]

gerislamico, on 08 February 2012 - 09:32 AM, said:

@PROBLEMCHYLD As with usbser.sys I'm wrong, I started researching failed the USB Drive detection and found the solution

Particulary Solution to no detect USB Drive
Remplaced Usbehci.sys 5.1.2600.1515 -> Usbehci.sys 5.0.2195.6882 NUSB3.5

supem, on 24 November 2011 - 03:07 PM, said:

I may have found a bug in "Intel® 82801EB (ICH5 Family) USB2 Enhanced Host Controller -24DD" of my COMPAQ D530 after installed latest 98 SESP 3.0 FINAL.
The controller referred to USBEHCI.SYS 5.1.2600.1515(xpsp2.040410-0905). Fixing it I changed USBEHCI.SYS to v.5.00.2195.6882

The file works on most systems, so what I will do since only a few are having this problem, I will note and add the USBEHCI.SYS v.5.00.2195.6882.
I also like the start menu banner, can you send it to me. Nice video btw. Thanks again.

[gerislamico]

Soon to finish my Spanish adaptation of U98SESP3
Resources and Deputy PSD "to edit it to taste" of the image of Start Menu

Add:
To serve these 2 options IE?
"Internet Explorer 5.5 SP2 Core Files (98lite Users Only) and Internet Explorer 6.0 SP1 Core Files (98lite Users Only)"
General users should install or can ignore them.

Attached File(s)

•  StartMenuBar.zip (30.36K)
  Number of downloads: 25

This post has been edited by gerislamico: 09 February 2012 - 07:15 PM

[bobcat]

I have a question, is the SP2 works with clean-installed Windows 98SE without the need of SP1? I'm sorry for my English... Thanks before...

This post has been edited by bobcat: 10 February 2012 - 12:06 AM

[PROBLEMCHYLD]

bobcat, on 10 February 2012 - 12:04 AM, said:

I have a question, is the SP2 works with clean-installed Windows 98SE without the need of SP1? I'm sorry for my English... Thanks before...

yes

[LoneCrusader]

PROBLEMCHYLD, on 08 February 2012 - 10:29 AM, said:

I also like the start menu banner, can you send it to me.

gerislamico, on 08 February 2012 - 05:04 PM, said:

Resources and Deputy PSD "to edit it to taste" of the image of Start Menu

FYI Bitmap 161 is ONLY used by Windows 95. Remember that the same version of EXPLORER is used on both 98 and 95 with the Desktop Update installed. If 161 is changed, then if that version of Explorer is loaded in 95 then the Start Menu will say 98.

So Bitmap 161 should be a nice gray-to-black-to-gray Windows 95 banner.

This post has been edited by LoneCrusader: 12 February 2012 - 11:57 AM

[dencorso]

So... we should use the original, unmodified, bitmap for 161, right?

[LoneCrusader]

dencorso, on 12 February 2012 - 12:35 PM, said:

So... we should use the original, unmodified, bitmap for 161, right?

No, it can be modified. I'm not opposed to making it look better. Just pointing out that it is only useful on 95. Also, I had considered changing it earlier myself, but I haven't managed to create a banner that I think looks very good.

More Info:

In 98, if the Start Menu grows longer (taller) than the bitmap banner, then the "space" above it will be auto-filled with the same blue color as in the original bitmap to prevent having it just "cut off."
EDIT: gerislamico is right below, 98 will autofill based on the color of the top of the bitmap.

In 95, this "auto fill" color is gray, not blue. So if the banner is changed from ending (at the top) with gray, then there will be a line wherever the banner ends and it will continue in gray to the top of the menu.

So, the 98 banner must end at the top in the same blue color as the original, and the 95 banner must end at the top in the same gray color unless someone knows what to edit to change the autofill colors.


EDIT:
Struck out incorrect information. The problem seems to only affect Windows 95. There must be some sort of "version check" in EXPLORER that causes Bitmap 161 to be used on 95, and Bitmap 161 is not extended based on the bitmap color.

This post has been edited by LoneCrusader: 16 February 2012 - 02:20 AM

[gerislamico]

Correctly 161 Bitmap it not modify for Win98/SE.

To look good in VGA Classic, edit it with the classic color palette 16 colors for 4 bits, Photoshop conducted the rest
The top of the bitmap should be the first pixel to the left the reference color. Windows will repeat along the "up" Menu.

Retouch with ResHacker Dialogue 2004 and AVI 3001 generated with Iexpress
I send capture,
If you like, sending "resources and AVI"

New

http://i41.tinypic.com/ienvxx.png

Old

http://i44.tinypic.com/5wa4a9.png

I hope that if they are of interest to incorporate it.

[PROBLEMCHYLD]

It looks nice but the text in the new image is too big. Can you make them smaller?

[gerislamico]

PROBLEMCHYLD, on 12 February 2012 - 09:54 PM, said:

Can you make them smaller?

Attachment 6 different models AVI 3001 and dialogue resources 2004 in Spanish, English and French by Google Traslation.
Add PSD File -> Logo Win98SE Extract Model from Wikipedia SVG and AVI model Preliminary
With zip 500Kb spent. Compress with WinRAR .., check extension

█ █ █

█ █ █

█ █ █



Note: Modify attachment. The resources previously uploaded, do not work with ResHacker "I do not use ResHacker"
Resources these work with ResHacker and make a script to ease the task "MOD.BAT"

Instructions

1º Copy U98SESP3.EXE into Folder
2º Execute MOD.BAT
3º Choose options
4º Obtain U98SESP3_EDIT.EXE

Attached File(s)

•  Dialog 2004 AVI 3001 PSD and script RESHACK.rar (454.45K)
  Number of downloads: 19

This post has been edited by gerislamico: 14 February 2012 - 11:05 AM

[PROBLEMCHYLD]

Thanks

This post has been edited by PROBLEMCHYLD: 13 February 2012 - 09:17 AM