MSFN Forum: Boot problem - MSFN Forum

Jump to content



Hard Drive and Removable Media issues Rules

If you have questions about Seagate 7200.11, do read the READ_ME_FIRST, then read the FGA. If your questions remain unanswered after reading those two stickies, then post. For all other Hard Drive and Removable Media issues, you may post right away.
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Boot problem Rate Topic: -----

#1 User is offline   clonesauce 

  • Junior
  • Pip
  • Group: Members
  • Posts: 61
  • Joined: 30-May 05

Posted 08 January 2006 - 12:21 AM

Hi all, I have a problem with booting up. When I boot up, the BIOS screen comes out and says "The system intruded, chassis opened or tempered before." What's the problem?

Thank you very much for the help.


#2 User is offline   oldwolf 

  • Wolf
  • PipPip
  • Group: Members
  • Posts: 155
  • Joined: 11-May 05

Posted 08 January 2006 - 02:33 AM

I believe some BIOS's will let you setup that warning, to let you know if any one has opened the case.
It may be set and you have opened the case earlier, or dont have the side panel on.

(I could be wrong, if so someone will correct me)

#3 User is offline   atomizer 

  • Senior Member
  • PipPipPipPip
  • Group: Members
  • Posts: 578
  • Joined: 24-December 04
  • OS:none specified
  • Country: Country Flag

Posted 08 January 2006 - 02:37 AM

that's correct i believe. i have the same option in my BIOS, though my case doesn't support it. yours probably does.

#4 User is offline   LLXX 

  • MSFN Junkie
  • PipPipPipPipPipPipPipPipPip
  • Group: Banned
  • Posts: 3,399
  • Joined: 04-December 05

Posted 08 January 2006 - 02:40 AM

The option "Chassis Intrusion Detect", in BIOS setup under page Advanced Setting, can be set to Disable to avoid this problem.

#5 User is offline   clonesauce 

  • Junior
  • Pip
  • Group: Members
  • Posts: 61
  • Joined: 30-May 05

Posted 08 January 2006 - 07:40 AM

Well lol, I've found a solution, my BIOS doesn't provide the intrusion Chassis security thing. It was because of a **** jumper >.< I took it out from the chassis pins, had trouble locating them. But anyways I've fixed it....(hates jumpers) ASUS A7N266-VM mobos doesn't seem to be very nice. I took like 3 hours before I actually could get past that message.

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users



All trademarks mentioned on this page are the property of their respective owners
Copyright © 2001 - 2011 msfn.org
Privacy Policy