DFI LanParty NF4 Ultra-D

#1 Jeremy

Casual Poster

Group: Members
Posts: 3,473
Joined: 24-June 04
OS:Windows 7 x64
Country:

Posted 13 January 2006 - 04:56 PM

I enabled and configured RAID0, striping, to use both SATA drives simultaneously but in Windows Setup where I am reformatting, it shows each drive as individual. What am I missing? I have 160GBx2 and I moved them both into the list of drives to form an array of, selected Striped and selected "Finish". It asked me to clear the drive data so I said yes, and then it showed both drives as one under "Array". But, in partition setup... they show as seperate...

This post has been edited by Jeremy: 13 January 2006 - 05:03 PM

#2 ripken204

The Hardware Guy

Group: Members
Posts: 6,311
Joined: 23-December 04
OS:Windows 7 x64
Country:

Posted 13 January 2006 - 05:51 PM

http://www.angrygame...m/nf4raid-1.htm

#3 Jeremy

Casual Poster

Group: Members
Posts: 3,473
Joined: 24-June 04
OS:Windows 7 x64
Country:

Posted 14 January 2006 - 09:38 PM

I integrated the Raid drivers with nLite and followed those exact instructions, but both drives appear as seperate. Any ideas?
Bah, screw Raid. I just want to be up and running and having fun. Nevermind. Never had Raid before, never had complaints...

This post has been edited by Jeremy: 14 January 2006 - 09:45 PM

#4 atomizer

Senior Member

Group: Members
Posts: 578
Joined: 24-December 04
OS:none specified
Country:

Posted 14 January 2006 - 11:11 PM

perhaps try it using the F6 method, if you haven't given up yet.

#5 Jeremy

Casual Poster

Group: Members
Posts: 3,473
Joined: 24-June 04
OS:Windows 7 x64
Country:

Posted 14 January 2006 - 11:35 PM

Shouldn't have to with nLite. Not going with RAID anyway, doesn't matter. If I lose one drive, at least I have the other.

MSFN Forum: DFI LanParty NF4 Ultra-D - MSFN Forum

Hard Drive and Removable Media issues Rules