MSFN Forum: dual lan cards - MSFN Forum

Jump to content



Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

dual lan cards does it help speed up a LAN/WAN connection? Rate Topic: -----

#1 User is offline   LordFett 

  • Member
  • PipPip
  • Group: Members
  • Posts: 210
  • Joined: 09-January 06
  • OS:Windows 7 x86
  • Country: Country Flag

Posted 06 March 2006 - 08:21 AM

I have an Asus A8N-SLI Premium Retail it has dual onboard NICs. My last Asus had the same thing, on both I have only ever used one. If I were to use both would it improve my connection speed? (Not that it is a problem now, but every little bit helps)


#2 User is offline   jondercik 

  • Advanced Member
  • PipPipPip
  • Group: Members
  • Posts: 445
  • Joined: 15-January 04

Posted 06 March 2006 - 08:23 AM

no. It does not support teaming of the two.

#3 User is offline   LordFett 

  • Member
  • PipPip
  • Group: Members
  • Posts: 210
  • Joined: 09-January 06
  • OS:Windows 7 x86
  • Country: Country Flag

Posted 06 March 2006 - 08:32 AM

View Postjondercik, on Mar 6 2006, 09:23 AM, said:

no. It does not support teaming of the two.

Then what is the point of the second? Ability to be on two different LANs at once?

[edit]Ok I just read about the dual NICs and they're to use as a gateway.[/edit]

This post has been edited by LordFett: 06 March 2006 - 08:35 AM


#4 User is offline   ripken204 

  • The Hardware Guy
  • PipPipPipPipPipPipPipPipPipPip
  • Group: Members
  • Posts: 6,311
  • Joined: 23-December 04
  • OS:Windows 7 x64
  • Country: Country Flag

Posted 06 March 2006 - 10:53 AM

yes, two lans at once. i tired this yesterday on my dfi nf4 ultra-d b/c someone else had this same question. and only 1 of my nics was reporting usage in task manager.

#5 User is offline   nmX.Memnoch 

  • MSFN Master
  • Group: Moderator
  • Posts: 2,086
  • Joined: 15-September 04
  • OS:Windows 7 x64
  • Country: Country Flag

Posted 06 March 2006 - 11:43 AM

Some NICs support methods of teaming, load balancing, and/or failvoer via the drivers (all Intel Server Adapters support these features). Using the Intel driver features it "teams" the adapters to make a single connection for the OS (think of a set of RAID'ed drives, you only get the one drive). The driver and application handle splitting up the traffic.

Server 2003 has features built in to support this with any pair of network cards. I've never used it but it supposedly works very well.

However, on a typical home network you're not going to notice any difference using either method. There are several reasons for this. One of those being that the PCI bus doesn't have the throughput for even a single Gigabit NIC. PCI Express is different, but you still won't notice the difference on a typical home network. And you most certainly won't notice the difference on a single cable modem connection because even a 10Mbit NIC is plenty fast enough for those.

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users



All trademarks mentioned on this page are the property of their respective owners
Copyright © 2001 - 2011 msfn.org
Privacy Policy