[S3pHiroTh]

Kiki Burgh, on Feb 13 2007, 10:52 AM, said:

S3pHiroTh, on Feb 13 2007, 05:09 PM, said:

(Can this happen if I slipstream, for example, KB888111 hotfix?)

been slipstreaming 888111 since it has been supported and i never had your results

This results are after I have compressed DRIVER.CAB with the tool that Tomcat has released some days ago. HFSLIP prep.cmd
Have you read my previous replies? The issue is ONLY when SP2.CAB doesn't exist because is already slipstreamed into DRIVER.CAB

[Kiki Burgh]

Tomcat76, on Mar 13 2006, 04:26 AM, said:

*********************************************************

The DBLBIN*.EXT files are now automatically renamed by HFSLIP. The new name contains the Service Pack level:
2000SP4.EXT (not updated; running HFSLIP with the old file will have it renamed automatically)
XPSP1.EXT (updated 2007-02-13: 1 obsolete file name added)
XPSP2.EXT (updated 2007-02-12: 39 obsolete file names added)
2003SP0.EXT (doesn't exist)
2003SP1.EXT (doesn't exist)

*********************************************************

Download hfslip-70212b

Changes:
- [IE7] support for BRANDING.CAB in HFCABS (requires MODIFYPE.EXE in HFTOOLS; files other than INF files MUST be newer than those in the IE7 executable)
- DBLBIN*.EXT files are renamed by HFSLIP (see above)

new file still goes into HFCLEANUP, right?

Tomcat76, on Mar 13 2006, 04:26 AM, said:

- HFSLIP.LOG now lists the files in HFCLEANUP

this is better! wouldn't just simply show in HFSLIP.log "HFCLEANUP detected" ... thanks!

[Tomcat76]

S3pHiroTh, on Feb 13 2007, 10:09 AM, said:

Ok, I have tested once again with the latest build release, but the results are the same.

It wasn't supposed to be fixed. I just added more text output (titles).

Can you give me the DRVINDEX.INF file that's in your SOURCE\I386 folder?

[S3pHiroTh]

Tomcat76, on Feb 13 2007, 12:20 PM, said:

S3pHiroTh, on Feb 13 2007, 10:09 AM, said:

Ok, I have tested once again with the latest build release, but the results are the same.

It wasn't supposed to be fixed. I just added more text output (titles).

Can you give me the DRVINDEX.INF file that's in your SOURCE\I386 folder?

Added as you wish
I have uploaded the old one (before hfslip prep script) too.

Attached File(s)

•  DRVINDEX_old.INF (66.23K)
  Number of downloads: 3
•  DRVINDEX.INF (62.09K)
  Number of downloads: 3

This post has been edited by S3pHiroTh: 13 February 2007 - 05:25 AM

[Tomcat76]

Well, I'm stumped. Everything is looking fine...

Try this special version which echoes even more text.

[S3pHiroTh]

Tomcat76, on Feb 13 2007, 12:56 PM, said:

Well, I'm stumped. Everything is looking fine...

Try this special version which echoes even more text.

Hi, tested the special version

I have see that some files are copied in DRIVER.CAB sections, but it displays "0 files copied". Maybe you can understand better

Attached File(s)

•  Text_new.rar (45.48K)
  Number of downloads: 6

[Tomcat76]

Weird. The only logical explanation I can give is that the files in your DRIVER.CAB package are fully up-to-date. Did you use a clean source with the prep tool?

[S3pHiroTh]

Tomcat76, on Feb 13 2007, 04:02 PM, said:

Weird. The only logical explanation I can give is that the files in your DRIVER.CAB package are fully up-to-date. Did you use a clean source with the prep tool?

Yes, it is clean. One thing I don't understand, why hfslip script recompress driver.cab if I don't add drivers? I have used hfslip prep tool because I test every version of the test build (and for corrections of my personalized windows cd), but if driver.cab will recompress is only a waste of time to use first the prep tool and after hfslip script.

The only thing that I have added to source directory is $OEM$ directory, that's all.

This post has been edited by S3pHiroTh: 13 February 2007 - 09:30 AM

[Tomcat76]

You have a full HF folder. Some hotfixes update driver binaries.

[S3pHiroTh]

Tomcat76, on Feb 13 2007, 05:08 PM, said:

You have a full HF folder. Some hotfixes update driver binaries.

Ah ok

[450]

Nice to meet you.
Because a certain phenomenon was noticed, it reports.

The end code "0x1a" has not adhered at the end of file TXTSETUP.SIF generated with
HFSLIP.
It is in the one of the SOURCE folder.

The influence by this is uncertain now. However, it seems that you should not miss because it is confirmed not to be able to continue setting up normally with the file before it applies by cutting down this end code.

[Tomcat76]

Are you talking about that little square at the bottom of the original TXTSETUP.SIF?

Well... With hundreds of runs with Windows 2000 SP4, XP SP1, XP SP2, 2003 Gold and 2003 SP1, I can positively say that it isn't required. Also, HFSLIP has been around for a very long time; people would've reported such problem...

[Neo2x]

Something weird happening here, I'm using 70212b with a hfslip-preped source; I'm was testing the iso creation with bbie.exe, mkisofs.exe and cygwin1.dll; after finishing creating the SOURCESS folder (which had driver.cab) the iso creation process started and then finished normally, but when I checked the SOURCESS folder driver.cab was nowhere to be found, like it was deleted by the iso creation process. (Just after the normal process said it copied driver.cab, I checked SOURCESS and it was there).

This post has been edited by Neo2x: 13 February 2007 - 06:12 PM

[Tomcat76]

Alright. That's a very specific case. Should be fixed in 70214a.

Keep these bug reports coming...

[Neo2x]

Problem solved, thank you.

[S3pHiroTh]

I have tested the last build release with February updates and I have had a strange issue. When I run Windows Update it shows 2 updates for KB890830.
 Malware.jpg (26.91K)
Number of downloads: 4

Anyone has this little issue?

This post has been edited by S3pHiroTh: 14 February 2007 - 07:33 AM

[EmRoD]

Tested hfslip-70212b with all the Feb hotfixes on XP pro, corp, and Home without issues

no issues with KB890830

[Neo2x]

After installing XP, with the 1.3 rc1, I get notified by Windows Updates that I don't have KB920872 and KB900485 even tough I have them both on my HF folder. Here is my HFSLIP.log. I have used a hfsliped-preped source BTW.

EDIT: After checking the log file I created I see this:

"
.....
Expandiendo source\i386\driver.cab a sourcess\i386\driver\xxwh1hlp.hlp.
Expandiendo source\i386\driver.cab a sourcess\i386\driver\zlogic.cyz.

4778 total de archivos.
Adding updated driver files
0 archivos copiados // copied files
0 archivos copiados
0 archivos copiados
0 archivos copiados
0 archivos copiados
0 archivos copiados
0 archivos copiados
0 archivos copiados
0 archivos copiados
0 archivos copiados

Basic cleanup"

So I guess the new .sys files aren't being copied to driver.cab.

Attached File(s)

•  HFSLIP.txt (4.55K)
  Number of downloads: 7

This post has been edited by Neo2x: 14 February 2007 - 06:22 PM

[Tomcat76]

Neo2x--

I've done extensive testing with those hotfixes, with merging options A and F, with and without the prep tool, and I can't duplicate this problem.

Does the problem still occur if you recopy the SOURCE from CD and just use the latest test release?

[S3pHiroTh]

Tomcat76, on Feb 15 2007, 10:26 AM, said:

Does the problem still occur if you recopy the SOURCE from CD and just use the latest test release?

No it doesn't... In that moment the script copy some files into DRIVER.CAB working directory then recompress...

Attached File(s)

•  Driver.jpg (67.1K)
  Number of downloads: 5

This post has been edited by S3pHiroTh: 15 February 2007 - 05:29 AM