[Tomcat76]

Because, as I said, it happens outside of HFSLIP as well. This is the entire code I ran in the "standalone" batch file:

MD SOURCE2&XCOPY/DEQ SOURCE SOURCE2

MD SPEX\i386&START/WAIT HF\w2ksp51.exe /Q /X:SPEX\

START/WAIT SPEX\i386\update\update.exe -u -n -o -q -s:"%~dp0SOURCE\"

PAUSE

[dziubek]

http://download.macromedia.com/get/flashpl...r_9_ax_beta.exe
slipstream Flash Player 9

*You must only unpack file install_flash_player_9_ax_beta.exe and overwrite these files with files from http://download.macromedia.com/pub/shockwa...ash/swflash.cab

dziubek

[Kramy]

Tomcat76, on May 28 2006, 02:30 PM, said:

Because, as I said, it happens outside of HFSLIP as well. This is the entire code I ran in the "standalone" batch file:

MD SOURCE2&XCOPY/DEQ SOURCE SOURCE2

MD SPEX\i386&START/WAIT HF\w2ksp51.exe /Q /X:SPEX\

START/WAIT SPEX\i386\update\update.exe -u -n -o -q -s:"%~dp0SOURCE\"

PAUSE

Try "MD SPEX\SP\I386"

Oh, why must you torment me with your brutalizing against my love? You do not consider the fair USP5.x to be of quality equal to MS-SPx, but as I gaze upon her perfect hotfixes and dozens of core features, and then upon your poor bent, twisted, and warped slipstreaming code, I see more...far more, than you ever could. Oh let her frollick with the other SPs, in glory together within SOURCE-patching land! [/fdvinsanity]

@ECHO OFF

IF EXIST "SLIPSOURCE\" RD "SLIPSOURCE\" /S /Q
MD SLIPSOURCE
XCOPY SOURCE SLIPSOURCE /D /E /Q

IF NOT EXIST "SPEX\SP\i386" MD SPEX\SP\i386
SET SPNAME=
FOR /F "TOKENS=1 DELIMS=" %%i in ('DIR /B HF\W2KSP5*.EXE') DO SET SPNAME=%%i
REN HF\%SPNAME% W2KSP.EXE
START /WAIT HF\W2KSP.EXE /Q /X:SP\
START /WAIT SP\i386\update\update.exe -u -n -o -q -s:"%~dp0SLIPSOURCE\"
REN HF\W2KSP.EXE %SPNAME%
RMDIR /S /Q SP

PAUSE

This post has been edited by Kramy: 29 May 2006 - 02:28 AM

[Tomcat76]

Why does it require another dir level?

BTW... You MD SPEX\SP but you extract the service pack into SP and the sliptreaming command uses the SP dir as a base without CD'ing into SPEX first.

Anyway, I'll check it out. Maybe there's a problem with the folder name "SPEX".

[Kramy]

I guess Gurgelmeyer's USP doesn't require the dirs to be made first. Just remove the whole line - the files slipstream properly on my system.

[Tomcat76]

Heh... I think the problem lies elsewhere.

Can you do me a favor and try this test release? Just run it and do the first portion of install to see if you get file copy errors.

HFSLIP_60529a.7z

This post has been edited by Tomcat76: 29 May 2006 - 05:53 AM

[Tomcat76]

Hahaha... You won't believe this...

I tested a USP5-slipstreamed source with 60527b, which had the file copy errors. In 60527c, I fixed another problem related to USP5 and mentioned in the changelog something like "fixed problem with USP5; one more to go". Now I see that that fix actually fixed the main problem, hehe.

I got side tracked in investigating this problem because, when you extract the USP5 executable, you can see there are roughly 414 files in that i386 folder which don't end up in the slipstreamed source. This is apparantly normal.

[Kiki Burgh]

hi sirs!

i would just like to ask if these lines have in any way negative factor in SOURCESS?

please know though that the final build is working great ... but these are just bits that caught my attention while watching the script do its thing ...

i may not have caught everything though that shows 0 files copied ...

WindowsXP-KB891070-x86-ENU.EXE
TEMP\SP2QFE\ntkrnlmp.exe
TEMP\SP2QFE\ntkrnlpa.exe
TEMP\SP2QFE\ntkrpamp.exe
TEMP\SP2QFE\ntoskrnl.exe
4 File(s) copied
0 File(s) copied

WindowsXP-KB892056-x86-ENU.EXE
TEMP\SP2QFE\mshtml.dll
TEMP\SP2QFE\urlmon.dll
2 File(s) copied
0 File(s) copied

WindowsXP-KB894179-x86-ENU.EXE
TEMP\SP2QFE\shdocvw.dll
1 File(s) copied
0 File(s) copied

WindowsXP-KB898461-x86-ENU.exe
0 File(s) copied

WindowsXP-KB901190-x86-ENU.exe
0 File(s) copied
TEMP\SP2GDR\LANG\imekr61.ime
1 File(s) copied
0 File(s) copied

WindowsXP-KB888432-x86-ENU.EXE
TEMP\SP2QFE\w32time.dll
1 File(s) copied
0 File(s) copied

WindowsXP-KB890923-x86-ENU.exe
TEMP\SP2GDR\browseui.dll
TEMP\SP2GDR\cdfview.dll
TEMP\SP2GDR\iepeers.dll
TEMP\SP2GDR\inseng.dll
TEMP\SP2GDR\mshtml.dll
TEMP\SP2GDR\msrating.dll
TEMP\SP2GDR\shdocvw.dll
TEMP\SP2GDR\shlwapi.dll
TEMP\SP2GDR\urlmon.dll
TEMP\SP2GDR\wininet.dll
10 File(s) copied
0 File(s) copied

WindowsXP-KB913808-x86-ENU.exe
0 File(s) copied

would it be quite safe to assume that newer files were already present in that is why nothing needs to be overwritten? or HFSLIP does not deal with these updates as all of these are not in our list of updates? btw, these are unofficial hotfixes

WindowsXP-KB891070-x86-ENU.EXE
Packet-writing programs for optical media recording devices run slower than expected on Windows XP Service Pack 2-based computers

WindowsXP-KB892056-x86-ENU.EXE
FIX: You may receive a "Page cannot be displayed" error message when you click a hyperlink to view a Microsoft Office document in Internet Explorer 6 Service Pack 1

WindowsXP-KB894179-x86-ENU.EXE
FIX: You may receive a "This operation has been canceled due to restrictions in effect on this computer" error message when you try to open the Internet Options dialog box in Internet Explorer 6

WindowsXP-KB898461-x86-ENU.exe
Software update 898461 installs a permanent copy of the Package Installer for Windows version 6.1.22.4

WindowsXP-KB888432-x86-ENU.EXE
A component that runs in the same process as the Windows Time service is stopped or is disabled unexpectedly in Windows XP

WindowsXP-KB890923-x86-ENU.exe
MS05-020: Cumulative security update for Internet Explorer

WindowsXP-KB913808-x86-ENU.exe
The embedded resource version of the LIP MUI files is incorrect in Windows XP Starter Edition

i know i do not need some of these & i am about to remove them from HF directory i just like to know how these are treated ...

thanks!

This post has been edited by Kiki Burgh: 30 May 2006 - 02:33 PM

[Tomcat76]

HFSLIP deletes "junk" files, and sometimes hotfixes are given special treatment. In these cases it's possible that no additional files are left to be copied over after a hotfix has been processed completely. So it's normal. I can only get rid of the "0 files copied" message by disabling all copy output, but I think most people would prefer to see the names of the binaries that are processed.

[Kiki Burgh]

thanks for the clarification ... i would too Tomcat ...

Tomcat76, on May 31 2006, 05:36 AM, said:

... prefer to see the names of the binaries that are processed.

[Kiki Burgh]

hi again!
may i ask too why this particular part (the lines i italicized) seems to change every now & then?

Creating ISO...
Warning: creating filesystem that does not conform to ISO-9660.
Warning: creating filesystem with (nonstandard) Joliet extensions
but without (standard) Rock Ridge extensions.
It is highly recommended to add Rock Ridge
Using MSCON000.CP_ for SOURCESS/I386/MSCONFIGx.cp_ (MSCONFIG.cp_)
Using SCANS000.EXE for SOURCESS/VALUEADD/MSFT/USMT/SCANSTATE_A.EXE (SCANSTATE.E
XE)
Size of boot image is 4 sectors -> No emulation
1.31% done, estimate finish Sat May 20 08:43:50 2006
2.63% done, estimate finish Sat May 20 08:45:44 2006
3.94% done, estimate finish Sat May 20 08:48:29 2006

Creating ISO...
Warning: creating filesystem that does not conform to ISO-9660.
Warning: creating filesystem with (nonstandard) Joliet extensions
but without (standard) Rock Ridge extensions.
It is highly recommended to add Rock Ridge
Using WAVPA000.AX_ for SOURCESS/I386/WavPackDSSplitter.ax_ (WavPackDSDecoder.ax
_)
Using QUICK000.QT_ for SOURCESS/I386/QuickTimeInternetExtras.qt_ (QuickTimeEsse
ntials.qt_)
Using QUICK001.QT_ for SOURCESS/I386/QuickTimeEssentials.qt_ (QuickTime.qt_)
Using MSCON000.CP_ for SOURCESS/I386/MSCONFIGx.cp_ (MSCONFIG.cp_)
Using DIVX_000.DL_ for SOURCESS/I386/divx_xx0c.dl_ (divx_xx07.dl_)
Using SCANS000.EXE for SOURCESS/VALUEADD/MSFT/USMT/SCANSTATE_A.EXE (SCANSTATE.E
XE)
Size of boot image is 4 sectors -> No emulation
1.30% done, estimate finish Sat May 20 10:53:16 2006
2.60% done, estimate finish Sat May 20 10:55:11 2006
3.89% done, estimate finish Sat May 20 10:57:07 2006

thanks!

[Tomcat76]

I can't tell you much about mkisofs. It's renaming files but the question is whether it updates the TOC so any requests for "MSCONFIGx.cp_" (by Windows setup) are redirected to "MSCON000.CP_".

Do all those programs install properly?

[Kiki Burgh]

it would seem that the programs install correctly ...
the only thing i noticed based on the 2 examples above is that this particular part of the process changes almost everytime i create new builds ... but it's okay ... was just curious ...

thanks again!

[Tomcat76]

An attempt at .NET 2.0 installation at T-13. It's working on Windows 2000 with RVM's silent installer. I still didn't test it with other Windows versions.

Please read the foot note in the main post.

Windows XP and Windows 2003 users should just place Aserone's silent installer in the HFSVCPACK folder but I didn't want to exclude these OS's from being able to use installers that don't contain the T-13 fix. The choice is yours.

[Tomcat76]

Apparantly there are still problems on WinXP/2K3. So here's 60603b...

I'll test it myself tomorrow.

[fz500]

Tomcat76, on Jun 3 2006, 09:41 AM, said:

An attempt at .NET 2.0 installation at T-13. It's working on Windows 2000 with RVM's silent installer. I still didn't test it with other Windows versions.

Please read the foot note in the main post.

Windows XP and Windows 2003 users should just place Aserone's silent installer in the HFSVCPACK folder but I didn't want to exclude these OS's from being able to use installers that don't contain the T-13 fix. The choice is yours.

Slipstream .NET 2.0

No Slipstram .NET Framework 1.1 SP1 ?

[Super-Magician]

.NET 1.1 is already supported. You just need RyanVM's installer. Download it and place it in HFSVCPACK. It already has SP1 and the KB886903 hotfix slipstreamed.

[Kiki Burgh]

this is the exact file for download:
Version: Size
Microsoft .NET Framework 1.1 SP1
Last Update: May 28, 2006 10.9MB
MD5 Sum: ed2f4a180189827ca590edccfd4f9739

here's the direct link:
http://www.whatcounter.com/dlcount.php?id=...dotnet11sp1.exe

[Kiki Burgh]

hi!
nothing really urgent ...
looking at the instructions though when the script is running might confuse new users (re: ISOconf.txt):
ECHO =================TommyP's 2K3/XP/W2K/IE HOTFIX SLIPSTREAMER===================
echo.
echo ************ Refer to the instructions for more details *************
echo.
echo File and Folder Format:
ECHO FDVFILES - FDV'S Fileset (W2K only)
echo FIX - WINNT.SIF, Boot Files, See instructions
echo HF - Non-renamed hotfix and critical updates files
ECHO HF - The Service Pack installer.
echo HFCABS - Cabinet Files: IE6 (2k Only), DX9, LegitCheckControl
ECHO HFSVCPACK - Switchless installers (Installed at T-13)
echo HFSVCPACK - REG files (Import your settings at T-13)
echo HFSVCPACK - INF files and CMD files (To be processed at T-13)
ECHO HFSVCPACK_SW - Installers that need a /Q:A /R:N switch (Installed at T-13)
ECHO HFTOOLS - HFSLIP Tools
echo HFTOOLS -MSICabExtract tool. See directions for download link
echo HFTOOLS -modifype.exe
ECHO HFTOOLS -ISOconf.txt (custom ISO creation)
ECHO HFTOOLS -expand.exe (orig. MS version if one in SYSTEM32 is replaced)
ECHO SOURCE - Dump your installation CD source here

This post has been edited by Kiki Burgh: 05 June 2006 - 01:21 PM

[Tomcat76]

Good catch. Thanks!