[T D]

It hangs if you minimize the window while you are creating the cab. For some reason. That's not a programming error, that's just how it is.

[Hyperian]

no i dont minimize it, i leave it in focus. the program hangs everytime.

[ricktendo64]

I love it cuz u can test if the installer will work by decompessing the cab file and double clicking the silent installer, you will find out if the switches u filled in are correct or wrong, u dont have to wait till u reinstall to find out if the addon u just made will work.

Thanx

[RAGGATIP]

Not to say this is no good. It is an excellent program but I too am having problems with it freezing. It seems to work with some install files I have created with Inno but then some it won't. 7zip uses loads of processing power when it freezes. I've tried creating a .cab without ticking the 7zip box but it still freezes. Nothing to do with the window being minimized or whatever.

[Hyperian]

mm i made it work when i move the .exe file i want to cab into it's own folder.

ricktendo64: i'm trying to make a cab file for tweakUi powertoy and the switch is /qb, as suggested in the list in the nlite installer. but when i extract the silent installer from the cab file it it runs like a normal non-silent install.

when you have made a cab correctly, does the silent installer just runs and then exits by itself?

[ricktendo64]

Hyperian, on Jul 9 2006, 08:45 PM, said:

when you have made a cab correctly, does the silent installer just runs and then exits by itself?

I just tried your switch and it didnt work fom me either, if you want to test nlaom succesfully I made a Diskeeper 10 addon, but it took trial and error, for example the switch starts with /S in caps instead of the diskeeper 7 (" /s /v""/qn REBOOT=Suppress") one from nlaom,


here is the diskeeper 10 switch: /S /v/qb

took me bout a thousand tries to find it, and yes! nlaom is suposed to make a silent switch installer.

[Hyperian]

thanks for the info rick, apparently the same command works for the task switcher, it did pop up a window with all the useable switches i just didnt know it has to be excatly like that.

with the task switcher i was able to find the popup window with the list of switches by using a shortcut and putting /qn in the target.

this does not seem to work with other powertoy like TweakUi. How do people usually find the list of switches for any installer?

[ricktendo64]

Kel has made a tweakUI control panel addon here http://www.ryanvm.ne...topic.php?t=576

And u can find more here http://www.ryanvm.ne...topic.php?t=511

Addon makers

Creareur Addon from vier (insert the switch first B-4 u select the program)

NLPC nLite Plugin Creater (Similar to nlaom without the silent switch it puts the switches in the .ini file)

Universal Silent Switch Finder in Send To Menu (this addon just right click the installer MSI or EXE and send to/USSF and it will tell u the correct switch)

This post has been edited by ricktendo64: 09 July 2006 - 10:36 PM

[{_carnificina_}]

ricktendo64, on Jul 9 2006, 08:12 PM, said:

Hyperian, on Jul 9 2006, 08:45 PM, said:

when you have made a cab correctly, does the silent installer just runs and then exits by itself?

I just tried your switch and it didnt work fom me either, if you want to test nlaom succesfully I made a Diskeeper 10 addon, but it took trial and error, for example the switch starts with /S in caps instead of the diskeeper 7 (" /s /v""/qn REBOOT=Suppress") one from nlaom,


here is the diskeeper 10 switch: /S /v/qb

took me bout a thousand tries to find it, and yes! nlaom is suposed to make a silent switch installer.

Which the program that you are making?

[Vita119]

Albanian language Translation

Attached File(s)

•  Albanian.rar (822bytes)
  Number of downloads: 31

[ricktendo64]

{_carnificina_}, on Jul 12 2006, 07:51 PM, said:

Which the program that you are making?

Diskeeper 10

[{_carnificina_}]

Vita119, on Jul 18 2006, 12:00 PM, said:

Albanian language Translation

thankz

[ricktendo64]

Diskeeper 10: /S /v/qn or /qb

The "/S" needs to be in CAPS, the rest no caps

It took me hours to get this right, I would like to know how to set it to smart scheduling, I read the help file for diskeeper 10 and it says the switches are SMART="YES" and CREATEDESKTOPSHORTCUT=1 but I havent tried the cab just decompressed it and tried it that way

This post has been edited by ricktendo64: 22 July 2006 - 05:03 PM

[cigolo]

Italian (Italy) translation ;-)


 Italiano__Italy_.rar (823bytes)
Number of downloads: 58

[twofacedjoker]

can someone please tell me how to use this to install applications in nLite(latest version)? For example i want to install firefox, winrar, etc. I know theere are pre-made addons, but i want to make this for non pre-made ones. Can someone help me with this program? Thanks

[TRuLLi]

i would like to thank you for this great program, started using it today..

( been on holiday for a long time )

This post has been edited by TRuLLi: 29 July 2006 - 04:41 AM

[ricktendo64]

twofacedjoker, on Jul 28 2006, 11:30 PM, said:

can someone please tell me how to use this to install applications in nLite(latest version)? For example i want to install firefox, winrar, etc. I know theere are pre-made addons, but i want to make this for non pre-made ones. Can someone help me with this program? Thanks

Integrate it in the " Integrate Hotfixes" tab, just add it like you would add a hotfix

If you are using the RyanVM Integrator just make sure you rename the .cab file to include the word "addon"

nLite Instructions

This post has been edited by ricktendo64: 29 July 2006 - 05:46 AM

[alexXXL]

Nice tool...
from where I can dl this ..... virtualltek.mgbr.ne doesn't work for me ....

[r3incarnat0r]

Hello {_carnificina_}, Czech translation is available!

Attached File(s)

•  nlaom_csy.zip (846bytes)
  Number of downloads: 116

[ZcWorld]

topice cleaned up
cant wait to see the next release