[maximus-decim]

MD Data Access Component Update 1.1
Only for Windows 98se
----------------------------------------------------------------
MDAC 2.8sp1 (include MSXML 3.0SP7)
Jet 4.0sp8 (837001)
Jet 4.0 Repl (321076)
MSXML 4.0 SP2 + 887606
2 files Jet 3.5sp3 (msjet35.dll, msrepl35.dll)
2 files MDAC 2.5sp3 (vfpodbc.dll, drvvft.chm - Visual FoxPro Driver)
XMLinst 3.0
3 files IE6sp1 + 832414(msxml.dll, msxmld.dll, msxmlr.dll - MSXML 2.5sp3)
MSXML 2.6sp2 + 887606
KB911562 - Update for MDAC ver.2.8sp1
KB870669 - Security update for MDAC
---------------------------------------------------------------
english - http://rapidshare.de...ACU11E.EXE.html
russian - http://rapidshare.de...ACU11R.EXE.html

For silent installation it is necessary to unpack archive (this cab-archve)
in any directory and to run the "setup.exe /Q"

What's new:
added
*KB911562 - Update for MDAC ver.2.8sp1
*KB870669 - Security update for MDAC

[jasinwa]

Hi Maximus-Decim,

well, I know what the NUSB does (you also had nice text explanation)..and it's great!!

What will this upgrade do for me besides update components (what are the components used for)?

This post has been edited by jasinwa: 28 April 2006 - 01:23 PM

[PsycoUnc]

-can this package be used as the "MSXML fixes" which we are supposed to apply after the 905915/912812 update(s)? (MDGx says we have to do HTML Help Update before, and MSXML fixes after, those updates... ) ?

[Eck]

Hey again, PsychoUnc!

Yep, I just did it like I always do. This package works fine for the "After."

Edit - But I did need to manually replace URLMON.DLL with the older version in KB905915. The installer didn't put the older file over the newer one. I used System File Checker for this, having extracted KB905915.

This post has been edited by Eck: 02 May 2006 - 01:22 PM

[bristols]

After I had replaced the buggy URLMON.DLL from KB912812 (build 6.00.2800.1538) with the older version from 905915 (build 6.00.2800.1526), I tried to install MDDACU 1.1. When the installer was "Setting up Control Panel", I got this error message:

RUNDLL32 caused an invalid page fault in
module KERNEL32.DLL at 016f:bff7a138.
Registers:
EAX=01472064 CS=016f EIP=bff7a138 EFLGS=00210212
EBX=0041c710 SS=0177 ESP=03befcfc EBP=03befd30
ECX=20616d6d DS=0177 ESI=0041c6a4 FS=424f
EDX=64616f4c ES=0177 EDI=014720d0 GS=0000
Bytes at CS:EIP:
89 51 08 8b 53 08 8b 43 04 89 42 04 8d 93 0b 10 
Stack dump:
03befd30 0041c6a4 00410000 00000000 bff7b31d 00410000 0041c6a4 0000006c 00000200 0041abb8 0041ac38 00000000 0041c6a4 03befd6c 65f014db 00410000

I had applied the Kernel Update to KERNEL32.DLL some time ago. Could the updated KERNEL32.DLL be the reason for the error message?

Then I uninstalled the Kernel Update, and tried installing MDDACU 1.1 again. Same error message.

After clicking off the error message, the rest of the installation seems to complete OK.

What gives?

This post has been edited by bristols: 02 May 2006 - 04:50 PM

[Eck]

Hmmm, some new glich, eh? My install of the MDAC updater went fine. Don't know what might be mucking up the works there.

Just guessing it's probably something left over from that kernel32 project. Frustrating, freak'n Windows! Perhaps the important stuff got installed. Have you tried testing Internet Explorer to see if ActiveX stuff will again install properly and work?

Mine mostly does. I had a problem with Windows Update Catalog when trying to go to my download basket, but that might be a Windows Catalog website problem. Dunno, really.

Also, sometimes different versions of MDAC components installed by other programs stop proper installation of other versions. Right now the only 3rd party interferrence I've got with MDAC is the ATI Multimedia Center and possibly stuff installed by WorksSuite 2005. Since I have the latest available versions of both installed, perhaps that's why the MDAC updater worked for me without problems.

If you've got some really old version installed by a game or something it might interfere. See in add/remove if you have DAO listed, and if it's there more than once (meaning you may have more than one version).

[noguru]

Well I have too the kernel update installed but I don't have any problems with installing this. The kernel update itself cannot be the cause.
And housecall is working like it should again! Thanks a lot

This post has been edited by noguru: 03 May 2006 - 03:14 PM

[Eck]

Yeah, I guess it's some other problem interferring. It'll be nice if he can troubleshoot it out, but if not I suppose he'll need to clean install again. Sheesh! I hate when that happens.

[miko]

are there any mirrors of this pack ?, i've tried rapidshare but i keep getting 'invalid session' repeatedly (with both IE and firefox)

[PsycoUnc]

(..."rapidshare".... ick... )

[bristols]

Hi Eck and noguru,

Thanks for the feedback regarding the error message I received when installing MDDAC 1.1 - helpful to know that MDDAC installed without problems for the both of you. I think I've narrowed down my problem to a handful of files, after getting an idea from another forum member. I haven't got any further than that in terms of troubleshooting the issue, just yet. Anyway, the updated MDDAC files did all seem to install (insofar as they actually replaced older files).

I tried installing MDDAC 1.1 on another 98 SE box, different in a few ways from the box on which I received the above kernel error. The attempted installation on this other box was successful - MDDAC 1.1 installed just fine, with the updated KERNEL32.DLL from Kernel Update Project. So yes noguru, it seems that the KUP can't be the cause of the problem.

The box with the kernel error has files from MDGx's 98SE2XP installation scripts (the IE files only, not the WMP files), and a handful of 2003 replacement files (that the successful-install box doesn't have). The successful-install box has 98SE2ME Option 2 installed, the kernel-error box doesn't.

So, perhaps the culprit(s) is one of those 98SE2XP files, or one of the handful of 2003 replacements. I will post again once I have a definitive answer.

This post has been edited by bristols: 10 May 2006 - 07:41 PM

[PsycoUnc]

...that's a great combo of install beds, bristols...

... if I weren't so busy [lazy ], I'd keep up a # of diff. install dir's [I already have a tiny (yet careful) real-mode DOS batch snippet that quickly switches between w98se installs (renames any 2 sets of ProgFiles/Windows dirs); -I used to keep 4 or 5 going, during testing/experimentation, til school got me busy this year)...
>;]

[MDGx]

bristols, on May 10 2006, 07:40 PM, said:

I tried installing MDDAC 1.1 on another 98 SE box, different in a few ways from the box on which I received the above kernel error. The attempted installation on this other box was successful - MDDAC 1.1 installed just fine, with the updated KERNEL32.DLL from Kernel Update Project. So yes noguru, it seems that the KUP can't be the cause of the problem.

The box with the kernel error has files from MDGx's 98SE2XP installation scripts (the IE files only, not the WMP files), and a handful of 2003 replacement files (that the successful-install box doesn't have). The successful-install box has 98SE2ME Option 2 installed, the kernel-error box doesn't.

So, perhaps the culprit(s) is one of those 98SE2XP files, or one of the handful of 2003 replacements. I will post again once I have a definitive answer.

Please do, I'm curious which 98SE2XP [ http://www.mdgx.com/98-5.htm#MP9 ] file(s) are buggy, so I can remove them.

Thanks.

[PROBLEMCHYLD]

This package needs to be updated and
all obselete files should be removed.

Thanks

[Max_04]

PROBLEMCHYLD, on Dec 12 2006, 03:36 AM, said:

This package needs to be updated and
all obselete files should be removed.

Thanks

With what updates please?

[PROBLEMCHYLD]

Max_04, on Dec 12 2006, 03:29 PM, said:

With what updates please?

you have to figure out which ones are obselete

Unofficial Windows 98/ME Jet 4.0 SP8 Database Engine SQL Fix:
http://support.micro....com/?id=925051
Direct download [1.88 MB]:
http://www.mdgx.com/files/Q925051.EXE
Requires Jet 4.0 Security Vulnerability Fix already installed:
http://www.microsoft...n/ms04-014.mspx

* Unofficial Windows 98/ME MDAC 2.5 SP3/2.7 SP1 Fix:
http://support.micro....com/?id=911562
- Unofficial MDAC 2.7 SP1 Patch for Windows 98/98 SP1/98 SE/ME [1.89 MB]:
http://www.mdgx.com/files/MD911562.EXE
- Unofficial MDAC 2.5 SP3 Patch for Windows 98/98 SP1/98 SE [1.22 MB]:
http://www.mdgx.com/files/Q911562.EXE

Replaces obsolete Q925672.EXE :
* Unofficial Internet Explorer 6.0 SP1 for Windows 98/98 SP1/98 SE/ME XML HTTP MSXML Control v4.0 SP2 MSXML4.DLL Security Vulnerability Fix:
http://www.microsoft...n/ms06-071.mspx
Direct download [647 KB]:
http://www.mdgx.com/files/Q927978.EXE

* Unofficial Jet 4.0 SP8 Database Engine Fix for Windows 98/98 SP1/98 SE/ME:
http://support.micro....com/?id=918144
Direct download [1.9 MB]:
http://www.mdgx.com/files/Q918144.EXE
Requires Jet 4.0 Security Vulnerability Fix:
http://www.microsoft...n/ms04-014.mspx

* Unofficial Internet Explorer 6.0/6.0 SP1 for Windows 98/98 SP1/98 SE/ME XML HTTP MSXML Control v3.0 SP7 MSXML3.DLL Security Vulnerability Fixes:
http://www.microsoft...n/ms06-061.mspx
Direct download [505 KB]:
http://www.mdgx.com/files/Q924191.EXE

Fixed INF copy code:
* Unofficial MDAC 2.8 SP1 for Windows 98/98 SP1/98 SE/ME Fix:
http://support.micro....com/?id=916528
Direct download [988 KB]:
http://www.mdgx.com/files/Q916528.EXE

* Unofficial Jet 4.0 SP8 Database Engine Fix for Windows 98/98 SP1/98 SE/ME:
http://support.micro....com/?id=913296
Direct download [584 KB]:
http://www.mdgx.com/files/Q913296.EXE
Requires Jet 4.0 Security Vulnerability Fix:
http://www.microsoft...n/ms04-014.mspx