[leo31.bhz]

ANYBODY,PLEASE HELP ME !!!!!

I'M VERY CONFUSED !!!!!!

First unpack power dvd setup to a folder.
Then install and register it, also the plugins if you have those.

It 's necessary install original Power DVD first , but is impossible trial activation !!!!!

And it's necessary install again used SFX file create below???

I do not understand !!!!!


"UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"TEST"=dword:00000000
"KeyUpdate"=dword:00000002
"CPNav"=dword:00000002
"MustUpdateKey"=dword:00000002

(I`ll of course change xxxx to my serials.)

I need use same or diferents serials numbers ????


And make a SFX file with those files , like this :

CODE
;The comment below contains SFX script commands

Setup=Setup.exe
Presetup=REGEDIT /S PowerDVD7.reg
TempMode
Silent=1
Overwrite=1

I have must create SFX file used PowerDVD7.reg file or Custom.ini file ????

Or both files I need change for SFX file ????


You van give it your own icon with winrar.

Now your switcheless silent powerdvd is ready. What’s this ???

It’s install file or executable new file ????

I do not understand !!!!!

Please help me !!!! I thanks for attention .
Leo

[muiz]

I never said anything about trial versions or activators.

[Major]

I explain you leo31.bhz.

First: Unpack the setup file with winrar to a folder

Second: install the program powerdvd and register it. then the plugins if you have the serials.

Third: you go to the directory "C:\programfiles\Cyberlink\Powerdvd" and copy the archive PowerDVD.sim to the setup folder in which you have extracted the program setup file before.

Fourth: Edit Custom.ini and put
in the first line: SILENT=1
search these lines and change them (in customo.ini)
RichVideo=1 to RichVideo=0
CPNAV=1 to CPNAV=3
now you must add theses lines where you want (remember that we are still working in the file custom.ini )
GoogleToolbar=0
HasCDKEY=1
CDKey=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
BuildInPacks=Notebook Pack, MPEG4 AVC Pack
MustUpdateKey=3
KeyUpdate=3
UI_RMK=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
UI_PMK=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
InstalledPacks=Advance Audio Pack, Interactual Pack
remember, in order to add this lineInstalledPacks=Advance Audio Pack, Interactual Pack, you must have the serial for the plug-in Advance Audio Pack and Interactual Pack, If not, you must delete that line from your custom.ini.

Fifth: you select all the archives that there are within the folder setup, and wuth the right button of the mouse you click Winrar-->add to the archive. in the program WinRar you click create SFX file and in the tab of the Comentary. copy and paste these lines:
Setup=Setup.exe
TempMode
Silent=2
Overwrite=1
Title=PowerDVD DeLuxe 7.0.1815

This post has been edited by Major: 28 August 2006 - 02:32 PM

[Solid as a rock]

major, you means richvideo=0

[Major]

Yes Solid as a rock.
Thanks

[PixelGuru]

Hi,

I would like to know if somebody can tell me where to find the png (if it is a png) that is used around the OSD, there where the info is displayed.
In version 6 there was no window around the info at all when switched to transparent.
Only the text was visible.
I find it very irritating couse the window is much to big .
It uses grey and black.
I have searched in the skinfiles (Source Hacker) and can change everything I want but not that one.
Maybe it is'nt in the skin at all but where to find it elswhere?
If it's not a png maybe someone here knows how to shut it off or delete it out of the program?

Thanks

[PixelGuru]

Found them already!

OSD\FS_INFO_BC.PNG
OSD\FS_INFO_BL.PNG
OSD\FS_INFO_BR.PNG
OSD\FS_INFO_MC.PNG
OSD\FS_INFO_ML.PNG
OSD\FS_INFO_MR.PNG
OSD\FS_INFO_TC.PNG
OSD\FS_INFO_TL.PNG
OSD\FS_INFO_TR.PNG

TL=TopLeft
MC=MiddleCenter
BR=BottomRight

Etc.

[PixelGuru]

Hmmmz...

No need to change graphics.

Just give in SKIN.XML all the windows witch needed for OSD and INDICATOR the same sizes and gone is the black frame around the OSD info.

Should be like this:

<!-- OSD -->

<ResizablePage name="OSD" DefaultWidth="200" DefaultHeight="120" MinimumWidth="64" MinimumHeight="90" Windowed="TRUE" UserResizable="FALSE" ResizeAsReferencePage="FALSE" Visible="FALSE">

<OSD name="OSD" left="0" top="0" right="200" bottom="120" ResizeStretchX="100" ResizeStretchY="100">

</ResizablePage>



<!-- Indicator -->

<ResizablePage name="Indicator" DefaultWidth="200" DefaultHeight="120" MinimumWidth="64" MinimumHeight="90" Windowed="TRUE" UserResizable="FALSE" ResizeAsReferencePage="FALSE" Visible="FALSE">

<Indicator name="Indicator" left="0" top="0" right="200" bottom="120" ResizeStretchX="100" ResizeStretchY="100" FocusAlpha="200">

<Command name="Panscan Indicator"/>

</Indicator>

</ResizablePage>

[Tasslehoff]

Same procedure for the 2211a patch, unpack the cyberlink patch installer, edit the Custom.ini
silent=1
GoogleToolbar=0
WebURL=
RichVideo=0

Delete the GoogleToolbar and RichVideo Folders and then repackage, but anyone who's followed this thread probably knows that already.

This post has been edited by Tasslehoff: 06 November 2006 - 06:49 AM

[firefly]

my custom.ini, it works...

just add on the "silent=1"

---------------------------------

[PowerDVD]
CLVer=7.0.1702.0
Vender=CYBERLINK
UsePVAspRatio=0
Line21ExceptVMR=1
RenderCloneMode=1
UISkinPath=Mercury.dll
UI_Multiple_Language=2
DefaultSkin=1
DX_ReconnectMethod=1
EXBUF=4294967294
silent=1
StillUpdate=1
TwinViewDxVA=1
DSAuRen=1
RCDRule=1
UIUseHVA=0
XResume=1
CHK_STCBYPTS=1
UIMediaDiscPlay=1
PseudoStop=3
AU_REMOVE_IFCAPS=1
UIClrCtrl_CurSel=2
VCD_Track=1
VCD_Segment=1
VCD_ErrSkip=200
NoMonSleep=1
OffMenuShadow=1
SetL21Rect=0
DX_EnableCLAudSpa=1
DX_EnableCLSubtitle=1
EnableTwinView=1
NO_CK=10000
UIAutoConnect=1
ChgAudNoFlush=1
UIErrorMode=32769
UIVolumeSwitch=1
DXM_X.IMP.3GP=2
DXM_X.IMP.HTTP=2
DXM_X.IMP.JPG=2
WebURL=http://activation.gocyberlink.com/english/activation/active.jsp?
WebURLVersion=str:10
GetBy=CDKEY
VCPSRealKey=10000
CustomerID=CYBERLINK
noRunReg=1
MCEPlug=1
CPNAV=1
EnableDVDAudio=1
RichVideo=1
CLH264=1
UPnP=1

------------------------------------------

[coucou]

Cyberlink PowerDVD 7.2 ULTRA

Here the silent installation for Cyberlink PowerDVD 7.2 ULTRA

1) Follow muiz method HERE with a small add.

Here the add:
1) instead of
Then go to your power dvd folder and copy the "PowerDVD.sim" file to the folder wher you extracted your setup.
do this
Then go to your C:\Program Files\CyberLink\PowerDVD\ folder and copy the "PowerDVD.sim" + C:\Program Files\CyberLink\PowerDVD\AudioFilter\"CLAud.sim" files to the folder wher you extracted your setup.

I made many test and noticed, that sometimes the .sim files are not taken in account during the installation.
To be sure that they're installed, after the silent install copy the .sim files to your your \Powerdvd\ and \PowerDVD\AudioFilter\ folders. Or use Winrar and make an sfx archive to automatically and sillently copying them.

2) Follow snajay registry settings HERE

Enjoy
coucou

[benners]

coucou, on Dec 28 2006, 11:27 PM, said:

Cyberlink PowerDVD 7.2 ULTRA
I made many test and noticed, that sometimes the .sim files are not taken in account during the installation.

I think it depends on which version gets installed, the Blu-Ray or HD version, mine is always the Blu-Ray, I don't know whether the setup decides off the DVD drive or the computer spec such as DVD drive, GFX card (HD compliant), Monitor (HD compliant), CPU speed etc.

I don't have a Blu-Ray DVD nor any HDCP compliant hardware so maybe the Blu-Ray version is a default for peasants like me . If you copy the sim files to the correct folder PDVDBD or PDVDHD dependant on which is going to be installed the install goes ok, providing the usual ini edits are applied, this has been my experience copying the files to the PDVDBD folder.

[MAVERICKS CHOICE]

Obviously not a big deal in your case then.

[Hanschke]

can u please tell me the line for the serial

[Tasslehoff]

powerdvd7.reg file placed in the install directory

Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD]
"NO_CK"=dword:00002710
"VCPSRealKey"=dword:00002710
"noRunReg"=dword:00000001
"HASCDKEY"=dword:00000001
"CPNAV"=dword:00000003
"CLH264"=dword:00000001
"CDKey"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxxx-xxxxxx"
"BuildInPacks"="Notebook Pack, MPEG4 AVC Pack"
"MustUpdateKey"=dword:00000003
"KeyUpdate"=dword:00000003
"UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxxx-xxxxxx"
"UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxxx-xxxxxx"
"InstalledPacks"="Advance Audio Pack"

[Sanjay]

benners, on Dec 29 2006, 11:01 PM, said:

I think it depends on which version gets installed, the Blu-Ray or HD version, mine is always the Blu-Ray, I don't know whether the setup decides off the DVD drive or the computer spec such as DVD drive, GFX card (HD compliant), Monitor (HD compliant), CPU speed etc.

I don't have a Blu-Ray DVD nor any HDCP compliant hardware so maybe the Blu-Ray version is a default for peasants like me . If you copy the sim files to the correct folder PDVDBD or PDVDHD dependant on which is going to be installed the install goes ok, providing the usual ini edits are applied, this has been my experience copying the files to the PDVDBD folder.

I don't have either a 'Blu-Ray' or 'HD-DVD' drive and on my system also the 'PDVDBD' version is the one that always gets installed. I guess it must be the default version for those without a 'Blu-Ray' or 'HD-DVD' drive.

The following procedure works for me:

Cyberlink PowerDVD 7.2 ULTRA - Silent installer instructions:

1) Unpack the 'PowerDVD 7.2 Ultra' original installer to a folder 'PowerDVD7ULTRA'.

2) Install 'PowerDVD 7.2 Ultra' from the original installer and register it with your serial.

3) Copy 'PowerDVD.sim' from 'C:\Program Files\CyberLink\PowerDVD\'
and 'CLAud.sim' from 'C:\Program Files\CyberLink\PowerDVD\AudioFilter\'
Then depending on the version that gets installed on your PC, 'PDVDBD' or 'PDVDHD' Paste the two copied files to either 'PowerDVD7ULTRA\PDVDBD\' or 'PowerDVD7ULTRA\PDVDHD\'.

4) Edit the file 'Custom.ini' in the extracted folder 'PowerDVD7ULTRA' and add the following:
------------------------------------------------
Silent=1
DX9=1
noRunReg=1
GoogleToolbar=0
------------------------------------------------

5) Then Edit the 'Custom.ini' files in 'PowerDVD7ULTRA\PDVDBD\' & 'PowerDVD7ULTRA\PDVDHD\' and add the following:
------------------------------------------------
GoogleToolbar=0
HasCDKEY=1
CDKey=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
BuildInPacks=Notebook Pack, MPEG4 AVC Pack
MustUpdateKey=3
KeyUpdate=3
UI_RMK=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
UI_PMK=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
-----------------------------------------------
(Replace 'xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx' with your own serial key)

6) Remove the 'GoogleToolbar' folder from 'PowerDVD7ULTRA\PDVDBD\' & 'PowerDVD7ULTRA\PDVDHD\'.

7) Then make a WinRAR SFX file with the files in the extracted folder 'PowerDVD7ULTRA', using the following:
-------------------------------------------------------------------
;The comment below contains SFX script commands

Setup=Setup.exe
TempMode
Silent=1
Overwrite=1
Title=Cyberlink PowerDVD Deluxe 7.2.2414.0
-------------------------------------------------------------------

8) Add the 'PowerDVD 7' icon with winrar.

9) Switcheless silent 'PowerDVD7ULTRA.exe' installer is ready.

I do end up with two small problems though.

1. First problem is that at the end of the silent install, an IE window opens up with the 'Readme.htm' file.

I suppose I could just delete the file "C:\Program Files\CyberLink\PowerDVD\Language\Enu\Readme.htm" as part of the silent install, but I am not sure if that would work and/or be the best way of doing it.

2. Second problem is that in the small display window on the bottom right of 'Power DVD' the scrolling sign says 'PowerDVD' only. Whereas when I install with the original installer and enter my serial key manually it shows 'PowerDVD Deluxe Version'.

Anyone else have the same problems? Does anyone have a solution for this?

[coucou]

Sanjay, on Jan 5 2007, 09:31 PM, said:

1. First problem is that at the end of the silent install, an IE window opens up with the 'Readme.htm' file.

I suppose I could just delete the file "C:\Program Files\CyberLink\PowerDVD\Language\Enu\Readme.htm" as part of the silent install, but I am not sure if that would work and/or be the best way of doing it.

Here bellow my AutoIt file, wchich close Readme.htm.
PDVD72sim.exe is sfx winrar archive copying "PowerDVD.sim" to C:\Program Files\CyberLink\PowerDVD\ folder and copy the and + "CLAud.sim" to C:\Program Files\CyberLink\PowerDVD\AudioFilter\
PDVD72.au3

RunWait("setup.exe")
WinWaitActive("CyberLink PowerDVD - Microsoft Internet Explorer", "")

For $i = 1 To 10 Step 1
	If WinExists("CyberLink PowerDVD - Microsoft Internet Explorer", "") Then
		WinClose("CyberLink PowerDVD - Microsoft Internet Explorer", "")
	Else
		ExitLoop
	EndIf
Next

Sleep(500)
RunWait("PDVD72sim.exe")

Sleep(500)
RunWait('RegEdit /S "PDVD72.reg"')

Quote

2. Second problem is that in the small display window on the bottom right of 'Power DVD' the scrolling sign says 'PowerDVD' only. Whereas when I install with the original installer and enter my serial key manually it shows 'PowerDVD Deluxe Version'.

Anyone else have the same problems? Does anyone have a solution for this?

You may add reg entries here bellow, "UI_NonTrial" particularly.
PDVD72.reg

[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD]
"NO_CK"=dword:00002710
"VCPSRealKey"=dword:00002710
"noRunReg"=dword:00000001
"KeyUpdate"=dword:00000003
"CPNAV"=dword:00000003
"MustUpdateKey"=dword:00000003
"CLH264"=dword:00000001
"CDKey"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"BuildInPacks"="Notebook Pack, MPEG4 AVC Pack"
"UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"HasCDKEY"=dword:00000001
"UI_NonTrial"=dword:00000000

Enjoy
coucou

[benners]

These are the only changes I make to the custom.ini in the PDVDBD folder

HasCDKEY=1
CDKEY=Put yours here
WebURL=
RichVideo=0
GoogleToolbar=0
UI_NonTrial=0

and use this iss file to install and it install silently without the readme file at the end.

Attached File(s)

•  setup.iss (1.04K)
  Number of downloads: 116

[kentk]

Any more tips on avoiding opening readme.htm at the end of installation ? (i dont understand and cant use the iss method)

This post has been edited by kentk: 24 January 2007 - 03:28 PM

[benners]

kentk, on Jan 24 2007, 09:27 PM, said:

Any more tips on avoiding opening readme.htm at the end of installation ? (i dont understand and cant use the iss method)

Why can't you use the iss file?.