[Solid as a rock]

bluejazz74us, on Aug 12 2006, 10:56 PM, said:

cyberloner, on Aug 12 2006, 02:51 PM, said:

make normal install of it....
enter all serial as normal register...
export all registry from
HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink
and HKEY_CURRENT_USER\Software\Cyberlink
combine them if u understand what i mean...
import then after silent installation of powerdvd...
i never have this problem....
dun forget about powerdvd sim file if you are using xpowerdvd =)

kk, I did the following:
I installed the application then I registered it manually, then I browesed to the TWO keys you mentioned and exported the entire key, so now I have TWO registery fle
Now I opened a blank document and named t powerdvd.reg
I copied all entries from both TWO files and paste it in the file,
there were some entries has NO values under it, so I removed it
but NOTHING CHANGED
what could be wrong

What about powerdvd.sim? Have you copied that too?

[bluejazz74us]

Solid as a rock, on Aug 12 2006, 04:01 PM, said:

What about powerdvd.sim? Have you copied that too?

You mean to copy and over write this file after installation?

[Solid as a rock]

bluejazz74us, on Aug 12 2006, 11:05 PM, said:

Solid as a rock, on Aug 12 2006, 04:01 PM, said:

What about powerdvd.sim? Have you copied that too?

You mean to copy and over write this file after installation?

Ah, it is already included? Now, we have to wait to other people who knows a solution

[bluejazz74us]

Yes
people like muiz, roughspear, ryan, ...etc
sure there is some one must know about it

[muiz]

bluejazz74us, on Aug 13 2006, 12:54 AM, said:

Yes
people like muiz, roughspear, ryan, ...etc
sure there is some one must know about it

Sure its very easy....

First unpack power dvd setup to a folder.
Then install and register it, also the plugins if you have those.
Then go to your power dvd folder and copy the "PowerDVD.sim" file to the folder wher you extracted your setup.
Then export the following reg key :

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD]
"Header"="Deluxe"
"HasCDKEY"=dword:00000001
"InstalledPacks"="CPRM Pack, DivX Pack, DTS Pack, DTS 96/24 Pack, DVD-Audio Pack, Express Pack, Interactual Pack, Mobility Pack, MPEG4 AVC Pack" 
"UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"TEST"=dword:00000000
"KeyUpdate"=dword:00000002
"CPNav"=dword:00000002
"MustUpdateKey"=dword:00000002

(xxxx stands for your own keys)
i named it : "PowerDVD7.reg"

Now copy that reg file in the same folder as where you extracted your setup.

In the folder withe the extracted setup open the "Custom.ini" file
and add this :

silent=1
GoogleToolbar=0

You can now remove the google toolbar folder.

And make a SFX file with those files , like this :

;The comment below contains SFX script commands

Setup=Setup.exe
Presetup=REGEDIT /S PowerDVD7.reg
TempMode
Silent=1
Overwrite=1

You van give it your own icon with winrar.

Now your switcheless silent powerdvd is ready.

This post has been edited by muiz: 13 August 2006 - 10:08 AM

[cyberloner]

nice rar tricks.... thanks ... learn something new for my installer again lol

[Solid as a rock]

muiz, on Aug 13 2006, 05:06 PM, said:

bluejazz74us, on Aug 13 2006, 12:54 AM, said:

Yes
people like muiz, roughspear, ryan, ...etc
sure there is some one must know about it

Sure its very easy....

First unpack power dvd setup to a folder.
Then install and register it, also the plugins if you have those.
Then go to your power dvd folder and copy the "PowerDVD.sim" file to the folder wher you extracted your setup.
Then export the following reg key :

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD]
"Header"="Deluxe"
"HasCDKEY"=dword:00000001
"InstalledPacks"="CPRM Pack, DivX Pack, DTS Pack, DTS 96/24 Pack, DVD-Audio Pack, Express Pack, Interactual Pack, Mobility Pack, MPEG4 AVC Pack" 
"UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"TEST"=dword:00000000
"KeyUpdate"=dword:00000002
"CPNav"=dword:00000002
"MustUpdateKey"=dword:00000002

(xxxx stands for your own keys)
i named it : "PowerDVD7.reg"

Now copy that reg file in the same folder as where you extracted your setup.

In the folder withe the extracted setup open the "Custom.ini" file
and add this :

silent=1
GoogleToolbar=0

You can now remove the google toolbar folder.

And make a SFX file with those files , like this :

;The comment below contains SFX script commands

Setup=Setup.exe
Presetup=REGEDIT /S PowerDVD7.reg
TempMode
Silent=1
Overwrite=1

You van give it your own icon with winrar.

Now your switcheless silent powerdvd is ready.

open the "Custom.ini" file
and change this: Richvideo=1 to Richvideo=0 (since richvideo.exe is a needless program when you only use PowerDVD to watch movies. If you use more Cyberlink Programs it could be usefull.)
"
Edit: Oh by the way, remove the folder richvideo too...

This post has been edited by Solid as a rock: 13 August 2006 - 12:53 PM

[bluejazz74us]

muiz, on Aug 13 2006, 10:06 AM, said:

bluejazz74us, on Aug 13 2006, 12:54 AM, said:

Yes
people like muiz, roughspear, ryan, ...etc
sure there is some one must know about it

Sure its very easy....

First unpack power dvd setup to a folder.
Then install and register it, also the plugins if you have those.
Then go to your power dvd folder and copy the "PowerDVD.sim" file to the folder wher you extracted your setup.
Then export the following reg key :

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\CyberLink\PowerDVD]
"Header"="Deluxe"
"HasCDKEY"=dword:00000001
"InstalledPacks"="CPRM Pack, DivX Pack, DTS Pack, DTS 96/24 Pack, DVD-Audio Pack, Express Pack, Interactual Pack, Mobility Pack, MPEG4 AVC Pack" 
"UI_PMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"UI_RMK"="xxxxx-xxxxx-xxxxx-xxxxx-xxxxx-xxxxx"
"TEST"=dword:00000000
"KeyUpdate"=dword:00000002
"CPNav"=dword:00000002
"MustUpdateKey"=dword:00000002

(xxxx stands for your own keys)
i named it : "PowerDVD7.reg"

Now copy that reg file in the same folder as where you extracted your setup.

In the folder withe the extracted setup open the "Custom.ini" file
and add this :

silent=1
GoogleToolbar=0

You can now remove the google toolbar folder.

And make a SFX file with those files , like this :

;The comment below contains SFX script commands

Setup=Setup.exe
Presetup=REGEDIT /S PowerDVD7.reg
TempMode
Silent=1
Overwrite=1

You van give it your own icon with winrar.

Now your switcheless silent powerdvd is ready.

Welldone, a full time job, I think you should work as a doctor coz every thing seems easy and has a way mate
thanks

[muiz]

Richvideo=1 to Richvideo=0

Sorry i forgot that 1

And if you use skins you can set the skin you want by : UISkinPath=Mercury.dll
Just put the name of your skin dll there

@cyberloner

Quote

nice rar tricks.... thanks ... learn something new for my installer again lol

I dont like 7zip installers , cause most of the time they dont set up in the original directory and cant be uninstalled.
And most 7zip's are english here , and i use a dutch Windows.
Winrar supports all switches , so why not use it.
90% of my apps are installed by winrar.

This post has been edited by muiz: 13 August 2006 - 01:45 PM

[Solid as a rock]

muiz, on Aug 13 2006, 08:37 PM, said:

Richvideo=1 to Richvideo=0

Sorry i forgot that 1

And if you use skins you can set the skin you want by : UISkinPath=Mercury.dll
Just put the name of your skin dll there

Thanks for the tip... Would it be usefull when i use the PRESETUP to run Powerdvd.cmd and write in Powerdvd.cmd to remove the folders "trial" and "ORLsubmission" and run the regtweaks offcourse? By this way you never will see the registerpopup (which ask your name and more)?

[muiz]

i use this in my cleanup.cmd :

DEL "%systemdrive%\Program Files\CyberLink\PowerDVD\OLRSubmission\OLRSubmission.exe"
DEL "%systemdrive%\Documents and Settings\Gebruiker\Menu Start\Programma's\CyberLink PowerDVD\On-Line Registration.lnk"
RD /S /Q "%SystemDrive%\Program Files\CyberLink\PowerDVD\OLRSubmission\""

EDIT:

It contains a few dll files wich are skins for power dvd in a sfx file.(silent swichless)
I dont know who the author is , so credits go to him/her.

http://rapidshare.de/files/29308972/PdvdSkin.rar.html

Screenshots :

http://www.neowin.net/forum/lofiversion/index.php/t466767.html

I dont know how to make own buttons and stuff like that , but you can change the "wallpaper" in the skin.
Open it with resource hacker of resource tuner.
And replace the picture , remember it has to be .png
Now you have a customized power dvd.

This post has been edited by muiz: 13 August 2006 - 07:34 PM

[MAVERICKS CHOICE]

Slightly off topic anyone have the pwrdvd.ico that they can upload? I can't seem to extract mine.

Cheers
MC.

[Sanjay]

MAVERICKS CHOICE, on Aug 14 2006, 12:55 PM, said:

Slightly off topic anyone have the pwrdvd.ico that they can upload? I can't seem to extract mine.

Enjoy!

Attached File(s)

•  PowerDVD7.ico.rar (38.89K)
  Number of downloads: 123

This post has been edited by Sanjay: 14 August 2006 - 01:40 AM

[MAVERICKS CHOICE]

Sanjay, on Aug 14 2006, 05:38 PM, said:

MAVERICKS CHOICE, on Aug 14 2006, 12:55 PM, said:

Slightly off topic anyone have the pwrdvd.ico that they can upload? I can't seem to extract mine.

Enjoy!

Thanks Man.

Cheers
MC.

[sleepydvdr]

Ok, everybody. I did it! I'm ashamed it took me so long to figure it out... First, if you want to install PowerDVD, and don't have DirectX, PowerDVD 5.0 is the last version that doesn't require DirectX. The problem I had with installing 5.0 was the silent installation kept getting halted on one screen that just tells you about a new feature in the program. The problem was skipping that screen.

First, to make this work, you need to know how to make SFX archives. I use WinRAR.

Here's how to do make it a silent install (also works for most InstallShield installer programs, too). Run the Setup.exe in "record" mode. That will record all your selection of options. You will actually install it like normal, including entering your serial number and everything. When finished, it will generate a file called setup.iss in your Windows directory. I made a .bat file with this inside:

setup.exe -r

Now to make the silent installer. Find the setup.iss file. What I did was make a SFX archive to put the file in the Windows directory. I named it issfile.exe. This is my SFX code:

Path=%windir%\
SavePath
Silent=1
Overwrite=1

Then I wrote a .bat file with this code:

start issfile.exe
start setup.exe /s /f1"%windir%\setup.iss"
exit

The setup.exe is the setup file for PowerDVD. You can rename the .iss file, but the setup.exe must be named setup.exe! Finally, I made an SFX for the whole thing. It includes all setup files, the .bat file, and the SFX that copies the .iss to Windows. Here is the SFX code for the final installer:

Setup=setuppowerdvd.bat
Silent=1
Overwrite=1

It worked perfectly! It may sound complicated on first reading, but it really isn't. Just do these things one step at a time and you will get it!

[muiz]

errr... this is an old topic about 7.0 , not 5.0

New version :

http://www.msfn.org/board/index.php?showtopic=80557

[cyberloner]

muiz, on Aug 13 2006, 06:50 PM, said:

i use this in my cleanup.cmd :

DEL "%systemdrive%\Program Files\CyberLink\PowerDVD\OLRSubmission\OLRSubmission.exe"
DEL "%systemdrive%\Documents and Settings\Gebruiker\Menu Start\Programma's\CyberLink PowerDVD\On-Line Registration.lnk"
RD /S /Q "%SystemDrive%\Program Files\CyberLink\PowerDVD\OLRSubmission\""

EDIT:

It contains a few dll files wich are skins for power dvd in a sfx file.(silent swichless)
I dont know who the author is , so credits go to him/her.

http://rapidshare.de/files/29308972/PdvdSkin.rar.html

Screenshots :

http://www.neowin.net/forum/lofiversion/index.php/t466767.html

I dont know how to make own buttons and stuff like that , but you can change the "wallpaper" in the skin.
Open it with resource hacker of resource tuner.
And replace the picture , remember it has to be .png
Now you have a customized power dvd.

somebody should let the skin maker of powerdvd 7 that his skins have bugs while playing movie more that 1 hour... draging video will fail.......... means cannot foward it to 1.30 2.00 of the video files...

[muiz]

yep we already know , but dont know who the skin maker is.
Why dont you make your own then

[cyberloner]

no idea how to extract all those skin file and replace...
rehack can't read the bitmap at all

by the way muiz
do u know how to make more command to rar sfx to run more command....
if u have one line to register the software and wanna patch it other things... can it be done?

This post has been edited by cyberloner: 17 August 2006 - 06:57 AM

[MAVERICKS CHOICE]

Run many or multiple cmds in the same rar sfx to my knowledge.

Cheers

MC.