SBacklin Posted December 18, 2006 Share Posted December 18, 2006 (edited) I am making a customized install CD. I am currently using the Promise RAID controller on my motherboard. I am using nLite to integrate SP2 and subsequent hotfixes and other customizations to the install. I could be wrong but, it was my understanding that the slipstreaming of RAID drivers into the install so that no floppy or pressing of F6 is needed in the beginning requires additional/different steps. Can someone type out what needs to be put in the txt files, etc and other step by step instructions for this? I don't want to mess this up.All my other drivers are stored in their own folders (install from CD method). Steps that I followed are located in the following thread. http://www.msfn.org/board/index.php?showtopic=12566Here are the Promise Files:There are folders for different operating systems and so below are the ones from the XP folder except for txtsetup.oem which was outside all of the different OS folders.txtsetup.oemfasttx2k.catfasttx2k.inffasttx2k.sysptipbmf.dllMy driver path is as follows:C:\WXPOEM_EN\OEM\DRIVERSI hope that is all the info someone needs to help me out. I would appreciate any assistance. Thanks! =) Edited December 18, 2006 by SBacklin Link to comment Share on other sites More sharing options...
SBacklin Posted December 19, 2006 Author Share Posted December 19, 2006 Well, I think I got it for the most part. However, setup says the line following line is invalid.fasttx2k = “Promise Technology Inc. 376/378 RAID Controller”I can't seem to figure out what exactly is wrong.I would attach the file to this post but, the board isn't letting me for some reason. It says the attachment is bigger than my limit. It says my global space left is 4.88mb when the txtsetup file is definitely smaller. So if anyone is willing to help me, message me or post back and leave an email addy where I can send the textsetup file for review. I would greatly appreciate it.The driver in question is fasttx2k.sys for my Promise RAID ControllerThanks for any help/input. Link to comment Share on other sites More sharing options...
iTwins Posted December 22, 2006 Share Posted December 22, 2006 Well, I think I got it for the most part. However, setup says the line following line is invalid.fasttx2k = “Promise Technology Inc. 376/378 RAID Controller”I can't seem to figure out what exactly is wrong.I would attach the file to this post but, the board isn't letting me for some reason. It says the attachment is bigger than my limit. It says my global space left is 4.88mb when the txtsetup file is definitely smaller. So if anyone is willing to help me, message me or post back and leave an email addy where I can send the textsetup file for review. I would greatly appreciate it.The driver in question is fasttx2k.sys for my Promise RAID ControllerThanks for any help/input....replied your email with the v2.3 BETA download link. Let me know how it goes please.Cheers Link to comment Share on other sites More sharing options...
SBacklin Posted December 22, 2006 Author Share Posted December 22, 2006 I will do that. I'm getting ready for Christmas weekend. I will have to continue slipstreaming after that. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now