kokett Posted October 3, 2003 Share Posted October 3, 2003 hello folks so here's what i did:i edited the txtsetup.oem to make it look like this:## TXTSETUP.OEM for HPT3xx UDMA/ATA100 RAID Controller#[Disks]d1 = "HPT3xx ATA RAID Controller Driver Diskette", \Disk1, \[Defaults]scsi = hpt3xxXP[scsi]hpt3xxXP = "HighPoint HPT3xx ATA RAID Controller (WinXP)", hpt3xx[Files.scsi.hpt3xxXP]driver = d1, hpt3xx.sys, hpt3xxdriver = d1, hptpro.sys, hpt3xxinf = d1, hpt3xx.inf, hpt3xx[Config.scsi.hpt3xxXP]value = "", Tag, REG_DWORD, 1value = "Parameters\PnpInterface", 5, REG_DWORD, 1[HardwareIds.scsi.hpt3xxXP]id = "PCI\VEN_1103&DEV_0005","hpt3xx"id = "PCI\VEN_1103&DEV_0004","hpt3xx"then i copied the XP directory from my drivers disk to $OEM$\$1\driver\raidthe txtsetup.oem resides there as well.then i added the following to my winnt.sif:[MassStorageDrivers] "HighPoint HPT3xx ATA RAID Controller (WinXP)" = "OEM" "IDE CD-ROM (ATAPI 1.2)/PCI IDE Controller" = "RETAIL"[OEMBOOTFILES] hpt3xx.cat hpt3xx.inf hpt3xx.sys hptpro.sys TXTSETUP.OEMI'm not sure about the winnt.sif part actually...So far so good. my question is now: is this correct, is this going to work? i'm asking because i read several sources and they didn't agree to eachother 100% so i did what i thought that should work.thanks in advancekokett Link to comment Share on other sites More sharing options...
kokett Posted October 3, 2003 Author Share Posted October 3, 2003 sorry didnt see that i can edit my posts ;( Link to comment Share on other sites More sharing options...
Pure Krome Posted October 27, 2003 Share Posted October 27, 2003 d00d! how did u go with this? I'm triyng this with HPT374 drivers ... to no luck .. . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now