installing more ram than MB supports
#1
Posted 27 May 2007 - 02:34 PM
#2
Posted 27 May 2007 - 02:53 PM
#3
Posted 27 May 2007 - 03:09 PM
ripken204, on May 27 2007, 04:53 PM, said:
ECS mobo's are extremely low in quality. If it even runs, count your blessings and don't mess with it.
Having only room for one gig of ram pretty well Dates it.....don't ya think?
Good luck with it, by the way......
#4
Posted 27 May 2007 - 03:11 PM
the prices of bundled am2/ddr2/motherboard 's has come down loads now, a cheapish powerful upgrade could be at hand
i've never had any luck with forcing an old motherboard (or a new one at that) to use more memory than it's supposed to, if it has say 4x slots, its likely they're 256mb each slot (i'm guessing your spec here tho)
#5
Posted 27 May 2007 - 07:36 PM
#6
Posted 27 May 2007 - 08:55 PM
#7
Posted 27 May 2007 - 09:43 PM
DDR2 is about half the price of DDR and SDRAM.
It would be nearly as cheap to buy 4 gigs DDR2 and a new Mobo/CPU as it would to "upgrade" your memory.
I like Asus - GigaByte, Asrock seems pretty good.
Just a few thoughts
#8
Posted 29 May 2007 - 12:17 PM
brucevangeorge, on May 27 2007, 08:36 PM, said:
I've never seen a BIOS upgrade increase the amount of supported RAM. The amount of support RAM is usually a chipset limitation (hardware) and not a BIOS (software) limitation.
#9
Posted 29 May 2007 - 01:11 PM
nmX.Memnoch, on May 29 2007, 01:17 PM, said:
Me either... but I figured its worth a shot. Updates add support for CPUs so I assumed RAM too.
Guess he has to get a new (and non-garbage) board this time.
#10
Posted 31 May 2007 - 07:31 PM
At those prices it's pretty hard to justify trying to retrofit a board outside of specs, don't you think? Get a good quality board and it will last you for 3-5 years or more by which time you'll want a new one anyway! :^)
#11
Posted 06 June 2007 - 11:07 AM
I'd say get a new CPU/Mobo/Ram combo. Also keep in mind that with a new combo you'll need a power new supply as well. Any good board you'll get these days is 20+4 pin power, and all the older boards are 20 pin. You could always get a 20pin to 20+4pin adapter, but I would highly advise against it. I killed a $160 Asus MVP Deluxe board like that (it's still sitting in a box at home, R.I.P.)
Also, you'll want a video card as MoBo's with onboard video are not that common these days. Assuming you don't want to keep your old PCI card you have in your old board, assuming you even have one and are not just using onboard.
So.... new mobo, cpu, ram, gpu, and psu.... for less then $500.... I'll give you a quick spec, feel free to shop around though.
AMD-
MoBo: (99.99) http://www.newegg.com/Product/Product.aspx...N82E16813136019
------- DFI INFINITY NF570-M2/G Socket AM2 NVIDIA nForce 570 MCP
CPU: (73.50) http://www.newegg.com/Product/Product.aspx...N82E16819103733
------- AMD Athlon 64 X2 3800+(65W) Windsor 2.0GHz
RAM: (83.99) http://www.newegg.com/Product/Product.aspx...N82E16820231098
------- G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
GPU: (47.99) http://www.newegg.com/Product/Product.aspx...N82E16814102078
------- SAPPHIRE 100192L Radeon X1050 256MB 128-bit DDR PCI Express x16
PSU: (94.99) http://www.newegg.com/Product/Product.aspx...N82E16817341010
------- OCZ StealthXStream OCZ600SXS ATX12V / EPS12V 600W
Total: 400.46 + Tax/Shipping
You could even get it about $50 cheaper by lowering the GPU, but as I said, I burned a $160 board with a bunk GPU. The key to a powerful system, is a powerful Power Supply. You could get cheaper memory too, but I'd recomend G-Skill, and that kit has hundreds of reviews while maintaining 5 Egg's rating.
Intel:
MoBo: (129.99) http://www.newegg.com/Product/Product.aspx...N82E16813131142
------- ASUS P5N-E SLI LGA 775 NVIDIA nForce 650i SLI
CPU: (114.50) http://www.newegg.com/Product/Product.aspx...N82E16819115013
------- Intel Core 2 Duo E4300 Allendale 1.8GHz
RAM: (83.99) http://www.newegg.com/Product/Product.aspx...N82E16820231098
------- G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
GPU: (47.99) http://www.newegg.com/Product/Product.aspx...N82E16814102078
------- SAPPHIRE 100192L Radeon X1050 256MB 128-bit DDR PCI Express x16
PSU: (94.99) http://www.newegg.com/Product/Product.aspx...N82E16817341010
------- OCZ StealthXStream OCZ600SXS ATX12V / EPS12V 600W
Total: $471.46
Notes: Again, you can drop off $50 by switching the PSU a bit. You are going to pay a little more for an Intel board, but it is technology that will be around for a while, as it is still fairly young. You could get a different board, and the memory, like I said on the AMD build, but these 2 components are rock solid, with lots of awsome reviews, and high ratings.
All in all, you'll see that buying new parts for the technology of 1999 is going to be more expensive then getting low end technology of 2007. Welcome to the next decade of computing.
((Side note, with either of these builds, you are going to notice a TREAMENDOUS boost in the power of your computer. Either of these will be more than capable of running XP, and well within range of running a smooth Vista.))
This post has been edited by DysfunktinaL: 06 June 2007 - 11:08 AM



Help

Back to top









