egorss78

Will try to explain this as best as I can. We currently do this with an XP based build we use. We currently copy a couple boot files and a bootable ISO to a machine, reboot that machine and have it load into a WinPE RAM setup and use some custom script to reimage the machine. We want to replicate this setup in a vista enviornment, which looks like I need to tweak BCDEdit and use a wim instead of an ISO. What I want to know is if anyone knows how to use BCDEdit to just replace the default boot device with an existing WIM image. I have found many articles that talk about adding a menu item to the boot menu to get this effect, but this requires a unquie GUID on each machine setup, hoping there is a general way to say to the machine "Boot from this WIM next time, regardless of anything else" So the idea is I could copy a wim file to the local machine, run a script to modify BCDEdit, reboot the machine in a PE environment. Any ideas? Thanks again.

Been using your tool for a little while now and just had the need to add the ICHR10x board to my disk. The tool looks like it added the driver the same way it always does, but Windows PE can not reconigze any hard drive on the computer. I put the disk in my older boards (ICHR9x), and it works fine. Any ideas?