shahed26

Ok, guys, the reason why I asked for help in connecting SCSI, because am getting 15-20 148GB 15K RPM Hdd's for FREE. For me, and am sure for you guys as well, anything for free is always welcomed unless it is a complete piece of junk. I know about SAS, and also do know that SCSI is an old tech, but because am getting them Hdd’s free, I thought why not just connect them to my workstation pc as I have only 1 Raptor and 1 500GB HDD currently connected to that pc.

Thanks to all you guys for your kind help. I have ordered an Adaptec PCI-E SCSI card with an converter. I was thinking of getting a SCSI RAID card, but they are way too expensive. Btw i have also got another 3x 148gb 15k RPM drives (same model as above but higher capacity) , so I wont bother with those 18.2gb anymore and instead will use the 15k rpm hdd's instead. Thank you

Hello Guys, I need some help connecting SCSI hard disks to my workstation pc. I don’t know hardly anything about SCSI’s, so some clear simple guide will be really helpful. I have got 4 of these SCSI hard disks. This is my motherboard But funny thing I don’t even know how many PIN connector this is, that’s why I took some pictures of it. My motherboard Asus P5W DH DELUXE (I have 1 spare PCI-Express slot and 1 spare PCI slot) Case Antec Server Case I do know that I will need a SCSI adaptor, but don’t know which one to get. Will I need any additional components apart from a SCSI adaptor? Would really appreciate if anyone can help me getting my SCSI hard disk set up. Thank you

This does NOT support Server 2008 R2, only Server 2008. I have made an updated version of this BDA installer to support R2. I will NOT be updating this page anymore. For all support and help, go to this link: http://win2008workstation.com/forum/viewto...f=22&t=1023 EDIT: Updated first page

File Reuploaded! You MUST have a Vista x64 installation DVD, or Vista x64 installed On your current system to get these x64 files.

Link was down, updated with a new link