Bumbastik

Hello , yes right .. echo format fs=fat32 label="WinPE" quick >> "%DISKPARTSCRIPT%" Bye AnyB

Hello Guys , all the specs are confirmed UsbKey -> Fat32 +WinPe 4 x64 -> Works fine UsbKey -> Fat32 +WinPe 4 x32-> Doesn't work UsbKey -> NTFS +WinPe 4 x32-> Doesn't work UsbKey -> NTFS +WinPe 4 x64-> Doesn't work How to build WinPe 4 Uefi mode - start with admin privilege DandISetEnv.bat - run copype.cmd amdx64 x\yourforlder - mount -> customize and commit your boot.wim present inside media/sources/boot.wim - copy ALL the content of the media folder on the root of your usb key Fat 32 That 's all ...enjoy BRs AnyB.

Hello , i will try and we will clarify all dubts ...as usual Official info should be file system fat or fat32 and WinPe x64 version Bye AnyB

Hi Guys , i made progress .... @ Tripredacus boot from fat /fat32 should be a UEFI spec /requirement @ Johnhc Probably i found the solution but i need to test my usbkey and if work fine i will post here the steps for other guys Bye AnyB .

Hi Johnhc , thanks so much for you prompt answer , My question is a bit different , I'm trying to build an usbkey ( fat\fat32) with uefi structure and WinPe4 BRs Bumbastik

Hi Guys , i have a quick question for you ...Is possible create a bootable usbkey with WinPe4 IN UEFI mode ? I'm trying to search this info but without success . Thanks so much in advance for your input . BRs AnyB.

YES , i confirm that all work fine with WinPe 3.0 environment Bye AnyB.