 XP x64 driver integration, Success stories with hints and links. |
  |
 Aug 8 2009, 04:11 AM Post
#1 | |
| Master of trial, error & Google  Group: Members Posts: 324 Joined: 26-April 07 From: Sydney Member No.: 137148 OS: XP Pro x64   |
As nobody can test all possible combinations of hardware this topic has been created to list those drivers and especially full systems (laptops) people have successfully installed. This thread is primarily meant as auxiliary information for the XP x64 nLite guide. Posting Guidelines: 1. In order to keep this thread spam free, please do not post here with driver requests or questions, instead start a fresh topic. The MSFN Device Driver subforum or an external site such as Planet AMD64 would be a better place for such enquires. 2. One post per system and one system per post, give appropriate system specifications. 3. Where possible provide links to driver downloads. 4. Paste the drivers section of your nLite "Last Session.ini" 5. If some driver type applications have to be silently installed, list them with the required switches. 6. If you don't use the latest version of a particular driver, state why not. 7. Finally, if there is any other useful information, by all means share it. This post has been edited by Kurt_Aust: Aug 8 2009, 03:08 PM |
 |   |
| Aug 8 2009, 04:12 AM Post
#2 | |
| Master of trial, error & Google Group: Members Posts: 324 Joined: 26-April 07 From: Sydney Member No.: 137148 OS: XP Pro x64 |
Specs: Gigabyte EP45-DS3R motherboard (Intel P45 + ICH10R Chipset) Realtek ALC889A codec, 2 x Realtek 8111C LAN Gigabyte R485-512H-B Graphics (Radeon HD 4850) Generic UPS Links: RAID F6 textmode install drivers Intel Chipset Drivers Realtek Audio Drivers Realtek LAN Drivers ATI Radeon Drivers Gigabyte Dynamic Energy Saver Intel Matrix Storage Manager CODE [Drivers] D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_ESB2 D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaStor_ESB2 D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_10DDO D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_10R D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_7MMDH D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaStor_7MDH D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_7RDH D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaStor_7RDH D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaStor_8ME9MEPCHM D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_8MEM D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_8RDHDO D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaStor_8R9R10RDOPCH D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_9MEM D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_9RDODH D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_PCH D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_PCHM D:\Operating_Systems\Drivers\EP45\1_RAID_64bit_Intel_textmode_driver_v8.9.0.1023_WHQL\iaAHCI.inf,iaAHCI_PCHM_1 D:\Operating_Systems\Drivers\EP45\2_Chipset_INF_allOS_9.1.1.1015_PV\All\2008s4el.inf,0 D:\Operating_Systems\Drivers\EP45\3_Audio_WDM_R229\WDM\HDA.inf,0 D:\Operating_Systems\Drivers\EP45\4_LAN_Driver_XP_5732_0720\Netrtle.inf,0 D:\Operating_Systems\Drivers\EP45\5_Video\Driver\XP6A_INF\CA_72273.inf,0 Notes: I find it safest to just include all of the Intel textmode drivers. My UPS came with PowerManagerII software, silent install switch shown, but you will have to add the file setup.iss to the install folder (Windows subdirectory renamed to PowerManagerII below), mine is attached but you'll need to edit it adding your own serial key. The latest version of the Gigabyte DES utility is missing setup.iss, again attached. For ATI graphics cards integrate the driver with nLite and install the Catalyst Control Center silently at Run2. I use the older 8.12 version as I find that full screen video on the secondary display (TV) is unreliable with the later versions. CODE Run1 %Source%AddOns\PowerManagerII\Setup.exe /S /F2%Temp%\PowerManagerIIsetup.log %Source%AddOns\GEST\Setup.exe /S /F2%Temp%\DynamicEnergySaverSetup.log %Source%AddOns\IATA89ENU.exe /S Run2 (requires .Net 2.0) %Source%AddOns\CCC\Setup.exe /S /F2%Temp%\CatalystControlCenterSetup.log This post has been edited by Kurt_Aust: Aug 8 2009, 04:53 AM Attached File(s) 
PowerManagerII_setup.iss ( 1.26K )
Number of downloads: 2
GigabyteDES_setup.iss ( 658bytes )
Number of downloads: 0 |
| | |
| Aug 8 2009, 04:12 AM Post
#3 | |
| Master of trial, error & Google Group: Members Posts: 324 Joined: 26-April 07 From: Sydney Member No.: 137148 OS: XP Pro x64 |
Specs: HP Compaq B1201TU Links, notes, et al I haven't tested it yet (lack a spare 2.5" SATA drive) but the following code should install the Quick Launch buttons CODE Run2 (requires .Net 2.0) Set __COMPAT_LAYER=WinXP %Source%AddOns\QuickLaunch\Setup.exe /S /F2%Temp%\QuickLaunchSetup.log Set __COMPAT_LAYER= |
| | |
| Aug 8 2009, 04:12 AM Post
#4 | |
| Master of trial, error & Google Group: Members Posts: 324 Joined: 26-April 07 From: Sydney Member No.: 137148 OS: XP Pro x64 |
Specs & ultimate support thread: Acer Aspire 5024WLMi Links: Acer support page AMBIT G (Broadcom solution) Wireless LAN driver (T60H906.00)" for XP-64BIT v3.100.64.0 TI 7x21 FlashMedia/SD Host controller driver -Win64 2.0.0.0 Launch Manager for for Win64 1.0.8.3 Foxconn Conexant MDC1.5 Modem WinXP/2K Driver for ATI SB400 /Win64 7.28.00.00 AMD processor driver ATI Video & SMbus drivers Realtek Audio Driver Synaptics touchpad driver Realtek LAN driver CODE [Components] ;# Drivers # Display Adapters Display Adapters (old) ;# Compatibility # [Drivers] D:\Operating_Systems\Drivers\5024\01_AMD Processor Driver\amdk8.inf,0 D:\Operating_Systems\Drivers\5024\02_SouthBridge_8-12_xp32-64_sb_72274\$OUTDIR\amdhdc.inf,0 D:\Operating_Systems\Drivers\5024\03_Video_Mod_8-12_xp64_dd_ccc_enu_72273\Driver\XP6A_INF\CA_72273.inf,0 D:\Operating_Systems\Drivers\5024\04_Audio_WDM_A406\WDM\Alcwdm.inf,0 D:\Operating_Systems\Drivers\5024\05_Synaptics_Driver_v10_1_8_XP64\synhid.inf,0 D:\Operating_Systems\Drivers\5024\06_LAN_Driver_XP_5719_0331\Netrtlx.inf,0 D:\Operating_Systems\Drivers\5024\07_80211g_Wireless\bcmwl5.inf,0 D:\Operating_Systems\Drivers\5024\08_Card_Reader\Windows\tiinst\TIFM21.INF,0 D:\Operating_Systems\Drivers\5024\09_Modem\AcrFxAti6.inf,0 Notes: One has to modify the Radeon video drivers .inf files in order for the card to be recognised, the easiest way being to use the D.H. Mobility Modder. Unfortunately this breaks WHQL signing so in order to force the video driver installation, one has to remove display adaptor support with nLite. Integrate the driver portion and install Catalyst Control Centre at Run2. CODE Run1 %Source%AddOns\LaunchManager\Setup.exe /S /F2%Temp%\LaunchManagerSetup.log Run2 (requires .Net 2.0) %Source%AddOns\CCC\Setup.exe /S /F2%Temp%\CatalystControlCenterSetup.log This post has been edited by Kurt_Aust: Aug 8 2009, 04:33 AM |
| | |
| Aug 8 2009, 04:13 AM Post
#5 | |
| Master of trial, error & Google Group: Members Posts: 324 Joined: 26-April 07 From: Sydney Member No.: 137148 OS: XP Pro x64 |
Specs: Gigabyte K8NS Pro (NVIDIA nForce3 250) nVidia 5200 based AGP card Links: nForce 4 chipset drivers (Only SM-Bus, not Audio, Ethernet or IDE) Realtek Audio Driver nVidia video driver Version 77.77 Silicon Image sil3512 Marvell 8001 Gigabit CODE [Drivers] D:\Operating_Systems\Drivers\K8NS\1_Chipset_6.86_nforce4_winxp64_international_whql\sata_ide\nvata64.inf,0 D:\Operating_Systems\Drivers\K8NS\1_Chipset_6.86_nforce4_winxp64_international_whql\SMBus\nf4sys.inf,0 D:\Operating_Systems\Drivers\K8NS\3_Audio_WDM_A405\WDM\Alcwdm.inf,0 D:\Operating_Systems\Drivers\K8NS\4_Video_77.77_winxp64_english_whql\nv4_disp.inf,0 D:\Operating_Systems\Drivers\K8NS\5_Marvell_LAN_yk51x64_v10.61.2.3\yk51x64.inf,0 D:\Operating_Systems\Drivers\K8NS\6_Sil_SATA_Base\AMD64\SI3112.inf,Si3112_AMD64 Notes: I use an older version of the nVidia driver as theatre mode output to a secondary display (TV) as a limited user is faulty under later versions, the colours are corrupted absolutely. I tried using a RAID 0 configuration on this board, but it caused networking problems and was slower than just putting the OS on one drive and all user data on the other. This post has been edited by Kurt_Aust: Aug 8 2009, 04:46 AM |
| | |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 21st November 2009 - 10:32 PM |
All trademarks mentioned on this page are the property of their respective owners
MSFN is not affiliated with Microsoft
Copyright © 2001-2009 msfn.org
Privacy Policy
MSFN is not affiliated with Microsoft
Copyright © 2001-2009 msfn.org
Privacy Policy