How to convert your Windows Server 2003...
to a Workstation!

Enabling Other Services

In this section we will show you how to:

  1. Enable the inbuilt IMAPI CD-Burning Service
  2. Enable Windows Image Acquisition (for Webcams, Scanners etc)

If you do not wish to enable any of these services, please move on to the next section - Advanced Configuration.

If you wish to use the inbuilt CD-Burning Service, follow these instructions: (Its recommended you leave this disabled if you want to speed up the Nero Burning ROM startup)

Go to Start -> Run -> and type in Services.msc and scroll down until you find the "IMAPI CD-Burning COM Service", double click on IMAPI CD-Burning COM Service and select startup type Automatic -> Apply -> Start -> OK.

Reboot to enable the CD Burning item in "Send-To".

IMAPI CD-Burning COM Service

Windows Image Acquisition

If you have a Camera, Webcam or Scanner, follow these instructions:

Go to Start -> Run -> and type in Services.msc and scroll down until you find the "Windows Image Acquisition (WIA) ", double click on Windows Image Acquisition (WIA) and select startup type Automatic -> Apply -> Start -> OK.

 

Now install the drivers for your Camera, Webcam, or Scanner!

Next, we will show you the Advanced Configuration setup in Windows Server 2003, click on as usual!

Page 10 - Advanced Configuration

Thanks goes out to these sites for supporting this guide!

[NT Compatible] [Mister.de]