johndoe74 Posted October 13, 2006 Share Posted October 13, 2006 (edited) Speedfan v4.35Overview:SpeedFan is a freeware program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips. SpeedFan can even access S.M.A.R.T. info for those hard disks that support this feature and show hard disk temperatures too, if supported. SpeedFan supports SCSI disks too. SpeedFan can even change the FSB on some hardware (but this should be considered a bonus feature). At the lowest level, SpeedFan is an hardware monitor software that can access digital temperature sensors, but its main feature is that it can change fan speeds (depending on the capabilities of your sensor chip and your hardware) according to the temperatures inside your pc, thus reducing noise.Changelog:completely rewritten the detection and the identification strategy of ITE IT871xF chips (fan readings are now ok)xAP support is now properly reenabled between sessionsfixed context sensitive help (F1 key) on Windows Vistaenabled, if needed, the SMBus on Intel ICH7 and ICH8-Madded several checks to CPU usage routines, fixing a nasty issue where an error window appeared once every secondadded full support for ATI SB600 SMBusadded full support for Intel ICH9 SMBusadded full support for nVidia MCP55 SMBusadded sull support for ADT7475added nVidia Control Panel access to read video card temperaturessupported the IT8716F and the IT8718F hardware monitor at unusual addressesadded some SMB scan exceptions for Compal 08A0SMBus address $15 no longer scanned on AOpen i975Xa-YDGfixed an issue that caused the DFI LP UT NF4 SLI-DR Venus to power off on program startadded support for Fintek F71872F voltage readingsIT8712F-J now uses two undocumented FAN DIVsspeeded up Asus M2N32-SLI DELUXE program startupadded detection of an unknown Fintek chip (to avoid false detection of other sensors at the same address)W83627EHF and W83627DHG now properly show SMARTFAN III in CONFIGURE / ADVANCEDW83627EHF and W83627DHG can now change PWM TYPE from PWM to DC in CONFIGURE / ADVANCEDfixed FAN DIVISOR settings for Winbond W83791Dadded PWM OUT BASE CLOCK selection for WINBOND W83627DHG, W83627EHF and W83627EHGwarning temperature can now be set as high as 125C in CONFIGUREwebsite :: SpeedfanLanguage :: EnglishFile size :: 1.74 MB (1,820,580 bytes)MD5 :: 7F913D71E92A891641BA44B3982ACF81Main :: MediaFireMirror :: BadongoMirror :: FileFrontMirror :: UploadingMirror :: ifile.itMirror :: divshareMirror :: midloadMirror :: todsMirror :: Uploaded.to Edited August 20, 2008 by johndoe74 Link to comment Share on other sites More sharing options...
johndoe74 Posted September 18, 2007 Author Share Posted September 18, 2007 (edited) Speedfan v4.34File size :: 1.64 MB (1,722,188 bytes)MD5 :: 87200FCF5279A5153697FD89C7B02BAEMain :: EsnipsMirror :: FileFrontMirror :: filefactoryMirror :: box.netMirror :: badongoMirror :: MediaFireMirror :: divshareMirror :: uploading.comMirror :: easy-share Edited August 19, 2008 by johndoe74 Link to comment Share on other sites More sharing options...
johndoe74 Posted April 22, 2008 Author Share Posted April 22, 2008 updated to v4.34 Link to comment Share on other sites More sharing options...
0d14r3 Posted April 24, 2008 Share Posted April 24, 2008 Thanks, JD!! Link to comment Share on other sites More sharing options...
johndoe74 Posted August 19, 2008 Author Share Posted August 19, 2008 updated to v4.35 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now