[blackwingcat]

Hi.
You cant use with XP SP0
but fcwin works on XP, Vista, 7

sonyu, on 29 September 2012 - 11:18 AM, said:

Hi Blackwingcat, can your wrapper be used with windowsxp SP0?

[Yffffonz]

@blackwingcat..

i am looking at your blog.. http://blog.livedoor...es/1557059.html and trying to figure out the process to get the Flash Control Panel accessible in win2k.

the translation is a little difficult to understand. i have flash already installed, using kernal32 KDW to be able to get the installer to run, but was wondering about the final steps to have access to the control panel. It gives the UxTheme.dll error.

If you get a chance maybe you can explain.

Thanks bro.

[blackwingcat]

Hi,
Did you copy uxtheme.dll to %systemroot%\system32\uxthexp.dll?

Yffffonz, on 12 October 2012 - 04:03 PM, said:

@blackwingcat..

i am looking at your blog.. http://blog.livedoor...es/1557059.html and trying to figure out the process to get the Flash Control Panel accessible in win2k.

the translation is a little difficult to understand. i have flash already installed, using kernal32 KDW to be able to get the installer to run, but was wondering about the final steps to have access to the control panel. It gives the UxTheme.dll error.

If you get a chance maybe you can explain.

Thanks bro.

[Yffffonz]

have not tried that yet... should it be installed through KDW?
I choose uxtheme.dll in KDW and then what is the next choice? use "start setup"? or "dynamic install"?

ok, i tried to just copy uxtheme.dll from KDW/bin into %systemroot%\system32\uxtheme.dll and it does let the control panel load, but it only shows the first tab of "Camera and Mic" the two other tabs: "Playback" and "Advanced" are blank, and "Playback" disappears when I click on it... maybe need to reboot? will give that a try later on.

BTW I do not yet have any of your kernal updates installed.

Thanks for the reply. Once I reboot that machine I will post back, but I am not sure that is the issue. Let me know if you know.

[blackwingcat]

I think This installer doesn't requires uxtheme.dll(and not used KDW)

if you use native windows 2000, you must install from swflash.inf.
If you use native windows 2000, don't copy uxthem.dll to system32, bacause ulrmon.dll works windows xp mode and many error will occur under the existing uxtheme.
How about have you seen the uxtheme error dialog?

Yffffonz, on 14 October 2012 - 08:06 PM, said:

have not tried that yet... should it be installed through KDW?
I choose uxtheme.dll in KDW and then what is the next choice? use "start setup"? or "dynamic install"?

ok, i tried to just copy uxtheme.dll from KDW/bin into %systemroot%\system32\uxtheme.dll and it does let the control panel load, but it only shows the first tab of "Camera and Mic" the two other tabs: "Playback" and "Advanced" are blank, and "Playback" disappears when I click on it... maybe need to reboot? will give that a try later on.

BTW I do not yet have any of your kernal updates installed.

Thanks for the reply. Once I reboot that machine I will post back, but I am not sure that is the issue. Let me know if you know.

This post has been edited by blackwingcat: 14 October 2012 - 11:21 PM

[Yffffonz]

blackwingcat, on 14 October 2012 - 11:21 PM, said:

I think This installer doesn't requires uxtheme.dll(and not used KDW)

if you use native windows 2000, you must install from swflash.inf.
If you use native windows 2000, don't copy uxthem.dll to system32, bacause ulrmon.dll works windows xp mode and many error will occur under the existing uxtheme.
How about have you seen the uxtheme error dialog?

Yffffonz, on 14 October 2012 - 08:06 PM, said:

have not tried that yet... should it be installed through KDW?
I choose uxtheme.dll in KDW and then what is the next choice? use "start setup"? or "dynamic install"?

ok, i tried to just copy uxtheme.dll from KDW/bin into %systemroot%\system32\uxtheme.dll and it does let the control panel load, but it only shows the first tab of "Camera and Mic" the two other tabs: "Playback" and "Advanced" are blank, and "Playback" disappears when I click on it... maybe need to reboot? will give that a try later on.

BTW I do not yet have any of your kernal updates installed.

Thanks for the reply. Once I reboot that machine I will post back, but I am not sure that is the issue. Let me know if you know.

yes, i did have an error of uxtheme.dll not found when trying to open the flash control panel, but flash will install correctly with using KDW and kernal32.dll

Quote

if you use native windows 2000, you must install from swflash.inf.

i think i remember reading something about that on your blog. i will have to go back into your blog and look for those instructions. if you get a chance (and remember where it is) maybe you can post a link to the instructions or jot down a quick explanation.

Thanks again bro.

PS. I should have mentioned that I am using kernal32 from KDW to install the most recent version of adobe flash v11.4.402.287, not the 10.3 version that you made the installer. I guess I should ask if there is any difference in installing the 11.4 versions instead of the 10.3 version... should i be using the 10.3 version with the installer from your site? does anyone know if there is much of a difference (in features or security?)

This post has been edited by Yffffonz: 16 October 2012 - 10:00 PM

[blackwingcat]

I think version 11.x series are very buggy.
So I recommend to use recentest version 10.3.

Adobe Flash 10.3.183.29 was released on 15th Oct 2012

Yffffonz, on 16 October 2012 - 09:23 PM, said:

PS. I should have mentioned that I am using kernal32 from KDW to install the most recent version of adobe flash v11.4.402.287, not the 10.3 version that you made the installer. I guess I should ask if there is any difference in installing the 11.4 versions instead of the 10.3 version... should i be using the 10.3 version with the installer from your site? does anyone know if there is much of a difference (in features or security?)

[Yffffonz]

Quote

Adobe Flash 10.3.183.29 was released on 15th Oct 2012

yes thanks.. i saw that on your blog page. I will have to give this version a try and remember to use the swflash.inf install method.

[blackwingcat]

I refreshed the flash 10.3 installer.

* fixed the problem which firefox can't recognize Flash Player.

[tomasz86]

@blackwingcat

I'm trying to run SSD life but get this:

Spoiler

Have you got any idea what the problem is? There's no such a function in MSVCRT.DLL.

This post has been edited by tomasz86: 20 October 2012 - 11:55 PM

[jumper]

_except_handler4_common is only in CRT8. You might be able to put a copy of the CRT8 msvcrt.dll in the ssdlife.exe folder.

[blackwingcat]

tomasz86, on 20 October 2012 - 11:54 PM, said:

@blackwingcat

I'm trying to run SSD life but get this:

Spoiler

Have you got any idea what the problem is? There's no such a function in MSVCRT.DLL.

Which edition did you use ?
Trial ? Free version ? Product version ? 2.3.0.50 ?

[tomasz86]

blackwingcat, on 21 October 2012 - 10:20 PM, said:

Trial ? Free version ? Product version ? 2.3.0.50 ?

I've tested again with 2.3.0.50 and it happens with both Free and Trial.

[blackwingcat]

Did you install XML 3/6 update for Windows 2000 NT6 msvcrt version ?

tomasz86, on 23 October 2012 - 03:54 AM, said:

blackwingcat, on 21 October 2012 - 10:20 PM, said:

Trial ? Free version ? Product version ? 2.3.0.50 ?

I've tested again with 2.3.0.50 and it happens with both Free and Trial.

[tomasz86]

blackwingcat, on 23 October 2012 - 06:00 PM, said:

Did you install XML 3/6 update for Windows 2000 NT6 msvcrt version ?

Which update do you mean exactly?

[blackwingcat]

[MS12-043]Microsoft XML Core Services 6.0 SP3/3.0 SP11(KB2719985)for NT 5.x
WindowsLU-XML-x86-INT.exe

It requires extended kernel NT6 version msvcrt

tomasz86, on 23 October 2012 - 10:53 PM, said:

blackwingcat, on 23 October 2012 - 06:00 PM, said:

Did you install XML 3/6 update for Windows 2000 NT6 msvcrt version ?

Which update do you mean exactly?

[int0x13]

Hello, i got a software, the freeware Simple watcher, folder monitoring:
http://www.simplewatcher.ru/en/
It reports a dependancy error, when clicking ont the "folder" browsing button:
Error is a msgbox with:
---------------------------SimpleWatcher.exe - Entry Point Not Found
---------------------------
The procedure entry point BaseDumpAppcompatCache could not be located in the dynamic link library KERNEL32.dll.
---------------------------
OK
---------------------------

I've found out a reference to this API in this thread. Do you think this issue can be fixed?
Currently working on a windows 2000 server, french version.
Thanks

[blackwingcat]

On my environment simple watcher seems to works without problem.
and it does not use BaseDumpAppcompatCache.
Plz check user environment other reason with dependency walker.

int0x13, on 22 November 2012 - 06:17 AM, said:

Hello, i got a software, the freeware Simple watcher, folder monitoring:
http://www.simplewatcher.ru/en/
It reports a dependancy error, when clicking ont the "folder" browsing button:
Error is a msgbox with:
---------------------------SimpleWatcher.exe - Entry Point Not Found
---------------------------
The procedure entry point BaseDumpAppcompatCache could not be located in the dynamic link library KERNEL32.dll.
---------------------------
OK
---------------------------

I've found out a reference to this API in this thread. Do you think this issue can be fixed?
Currently working on a windows 2000 server, french version.
Thanks

[int0x13]

blackwingcat, on 22 November 2012 - 10:27 PM, said:

On my environment simple watcher seems to works without problem.
and it does not use BaseDumpAppcompatCache.
Plz check user environment other reason with dependency walker.

int0x13, on 22 November 2012 - 06:17 AM, said:

Hello, i got a software, the freeware Simple watcher, folder monitoring:
http://www.simplewatcher.ru/en/
It reports a dependancy error, when clicking ont the "folder" browsing button:
Error is a msgbox with:
---------------------------SimpleWatcher.exe - Entry Point Not Found
---------------------------
The procedure entry point BaseDumpAppcompatCache could not be located in the dynamic link library KERNEL32.dll.
---------------------------
OK
---------------------------

I've found out a reference to this API in this thread. Do you think this issue can be fixed?
Currently working on a windows 2000 server, french version.
Thanks

Depends.exe on the .exe file:


Uploaded with ImageShack.us

[blackwingcat]

Did you use XP's APPHELP.dll?
You must delete it.

int0x13, on 30 November 2012 - 04:42 AM, said:

blackwingcat, on 22 November 2012 - 10:27 PM, said:

On my environment simple watcher seems to works without problem.
and it does not use BaseDumpAppcompatCache.
Plz check user environment other reason with dependency walker.

Depends.exe on the .exe file:


Uploaded with ImageShack.us